- Joined
- Aug 20, 2016
Hey guys,
my realname is Benny.
i am building my first own Case and wanted to share it with you.
I hope you will enjoy it! =)
My build is called Project zero cause its my first scratch build.
I have made a few little modifications throughout the past years but now it is time to
make somthing big ;D
Contemplated system:
Hardware:
Mainboard: Asus Maximus V Gene
CPU: Intel i5 3570k
Ram: G.Skill RipjawsZ (4x4) 16 GB
GPU: ???
PSU: ???
SSD: ???
HDD: 1x WD Green 750 GB
2x old Samsung 1TB
Watercooling:
Rads: 2x Alphacool NexXxoS XT45 X Flow
Res: 2x Alphacool Eisbecher 250mm
CPU: Alphacool NexXxoS XP³ Light
GPU: Alphacool NexXxoS GPX
Pumps: 2x Alphacool Laing DDC310 + Plexitop
Ram: Alphacool D-Ram cooler
Fittings: Alphacool Eiszapfen
Tubing: PETG
Fans: ??? dont know yet, and dont know if i am just going to make a push configuration or go straight push/pull =)
Current status:
Here is a sketch of my Imagination:
A friend of mine was so nice to make some renders before he went on holidays. Due to the lack of time
he couldnt finish them, but they will help you to imagine what i want to do.
Thanks for that.
The finished Case will have the following measures:
64,8 x 64,8 x 25,8
Materials used
aluminum slot profile
aluminum plates
"Dibond"
Plexi
So again, i hope you will enjoy it.
constructive Criticism and Opinions are welcome.
greez benny
- - - Updated - - -
Here are the photos of the slot profile which will be the frame for my case.
The profiles are 20x20 mm
my realname is Benny.
i am building my first own Case and wanted to share it with you.
I hope you will enjoy it! =)
My build is called Project zero cause its my first scratch build.
I have made a few little modifications throughout the past years but now it is time to
make somthing big ;D
Contemplated system:
Hardware:
Mainboard: Asus Maximus V Gene
CPU: Intel i5 3570k
Ram: G.Skill RipjawsZ (4x4) 16 GB
GPU: ???
PSU: ???
SSD: ???
HDD: 1x WD Green 750 GB
2x old Samsung 1TB
Watercooling:
Rads: 2x Alphacool NexXxoS XT45 X Flow
Res: 2x Alphacool Eisbecher 250mm
CPU: Alphacool NexXxoS XP³ Light
GPU: Alphacool NexXxoS GPX
Pumps: 2x Alphacool Laing DDC310 + Plexitop
Ram: Alphacool D-Ram cooler
Fittings: Alphacool Eiszapfen
Tubing: PETG
Fans: ??? dont know yet, and dont know if i am just going to make a push configuration or go straight push/pull =)
Current status:
Here is a sketch of my Imagination:
A friend of mine was so nice to make some renders before he went on holidays. Due to the lack of time
he couldnt finish them, but they will help you to imagine what i want to do.
Thanks for that.
The finished Case will have the following measures:
64,8 x 64,8 x 25,8
Materials used
aluminum slot profile
aluminum plates
"Dibond"
Plexi
So again, i hope you will enjoy it.
constructive Criticism and Opinions are welcome.
greez benny
- - - Updated - - -
Here are the photos of the slot profile which will be the frame for my case.
The profiles are 20x20 mm
Last edited: