Hey guys,
I have a 1090T with a M4A89td-Pro.
Got cpu to 4.01 Ghz Stable.
Cpu : 1.45 Volts
Dram: 1.70 volts
Cpu/Nb 1.3 Volts
Nb: 1.2695 Volts
VDDA: 2.5
Cpu/NB Frequency: 2750Mhz
Ht Frequency: 2000Mhz
LLC: Enabled
CPU/NB LLC: Enabled
CPU Spread Spectrum: Auto (what does this do?)
Ran OCCT for an hour, cpu temp maxed out at 63 degrees celcius, core temp 50 degrees.
Ran Prime95 Blend for an hour Cpu temp maxed at 62, core 53.
cpu at idle runs at 35 degrees.
So temps are still good, wanna push it to 4.2. suggestions for settings?
One final note: on my old board settings stayed in yellow when I changed voltages, now my ram voltage is purple, and my cpu/nb is red, and my cpu voltage is red? is this too much for the board? on my old asus 880G, they seemed to be fine.
I have a 1090T with a M4A89td-Pro.
Got cpu to 4.01 Ghz Stable.
Cpu : 1.45 Volts
Dram: 1.70 volts
Cpu/Nb 1.3 Volts
Nb: 1.2695 Volts
VDDA: 2.5
Cpu/NB Frequency: 2750Mhz
Ht Frequency: 2000Mhz
LLC: Enabled
CPU/NB LLC: Enabled
CPU Spread Spectrum: Auto (what does this do?)
Ran OCCT for an hour, cpu temp maxed out at 63 degrees celcius, core temp 50 degrees.
Ran Prime95 Blend for an hour Cpu temp maxed at 62, core 53.
cpu at idle runs at 35 degrees.
So temps are still good, wanna push it to 4.2. suggestions for settings?
One final note: on my old board settings stayed in yellow when I changed voltages, now my ram voltage is purple, and my cpu/nb is red, and my cpu voltage is red? is this too much for the board? on my old asus 880G, they seemed to be fine.