- Joined
- Nov 24, 2004
- Location
- Australia
"Abit AN8 Ultra v1.0 crashing (BSOD's etc. and freezing)...what's going on???"
My Abit AN8 Ultra v1.0 repeatedly crashes.
Firstly my specs:
Abin AN8 Ultra v1.0 w/ BIOS rev. 19
Venice 3200+
256Mb X800 Vanilla (PCIe)
Onboard SoundMAX 7.1 audio
1Gb (2x512Mb) Hynix DDR Ram in Slots 1&3 (I <i>think</i>)
WD 250Gb SATA2 Hdd
Antec 550W TruePower 2.0 PSU
Pioneer DVR-110
Samsung 16x DVD-ROM
Floppy
What are some suggestions to stop this from happening?
Try memory command at 2T rather than 1T?
Should I increase voltage above default specs to the CPU, RAM, NB etc.
I think all components are running fine (temp. wise)
PSU is giving out stable voltage rails (according to mobo)
So why is it unstable and what are some suggestions as to fixing the problem (I'll try ANY solutions)
Also how do I determine if it is a hardware or software problem??? I think it's hardware because I've heard numerous times that A64 setups can be rather finiky
Thanks in advance,
KellyK
My Abit AN8 Ultra v1.0 repeatedly crashes.
Firstly my specs:
Abin AN8 Ultra v1.0 w/ BIOS rev. 19
Venice 3200+
256Mb X800 Vanilla (PCIe)
Onboard SoundMAX 7.1 audio
1Gb (2x512Mb) Hynix DDR Ram in Slots 1&3 (I <i>think</i>)
WD 250Gb SATA2 Hdd
Antec 550W TruePower 2.0 PSU
Pioneer DVR-110
Samsung 16x DVD-ROM
Floppy
What are some suggestions to stop this from happening?
Try memory command at 2T rather than 1T?
Should I increase voltage above default specs to the CPU, RAM, NB etc.
I think all components are running fine (temp. wise)
PSU is giving out stable voltage rails (according to mobo)
So why is it unstable and what are some suggestions as to fixing the problem (I'll try ANY solutions)
Also how do I determine if it is a hardware or software problem??? I think it's hardware because I've heard numerous times that A64 setups can be rather finiky
Thanks in advance,
KellyK