new to posting but been reading a fair amount of info =p anywho...i snagged up a cheap 3500+ and a used neo2 plat thinking i could oc it a good bit. well my goal was at least 2600. My problem atm is i cant seem to get it to pass prime95 set at 260 x 10 with memory at 200 or even at 166 dividers. I ever loosened up the timings to 3-3-3-8-2T and it still failed. it gave the expected .05 or some such error.
I followed the steps in all the A64 oc guides i found here and on all the other boards results are a follows.
HTT max: 280 (i am sure this can get higher)
CPU max: 2.7ghz
Memory max: 285
most i can get out of this stable is 2400 or 2500. with 2400 the memory runs at 200mhz on the 166 divider and on 2500 it runs at 208. Also my vcore seems to stick at 1.4-1.425 in cpu-z even tho its set at 1.5 in the bios...would that affect the OC stability at all?
Specs are:
3500 venice core
Neo2 Plat flashed with Sideeffects 1.D beta1 bios
OCZ 3200 Plat rev2 2x512
BBA x800xl agp
any info would help =X
I followed the steps in all the A64 oc guides i found here and on all the other boards results are a follows.
HTT max: 280 (i am sure this can get higher)
CPU max: 2.7ghz
Memory max: 285
most i can get out of this stable is 2400 or 2500. with 2400 the memory runs at 200mhz on the 166 divider and on 2500 it runs at 208. Also my vcore seems to stick at 1.4-1.425 in cpu-z even tho its set at 1.5 in the bios...would that affect the OC stability at all?
Specs are:
3500 venice core
Neo2 Plat flashed with Sideeffects 1.D beta1 bios
OCZ 3200 Plat rev2 2x512
BBA x800xl agp
any info would help =X