My 6000+ Overclocking Adventure

Hi all,

I finally bought a decent processor! A new 6000+ 90nm.

It runs pretty fast at the stock 3Ghz but me being me i tried to overclock it.

Could get is 1Mhz faster than the 3Ghz without it BSODing. Turned out to be my ram, so I got some decent stuff in it and managed 3300mhz on stock volts (3.25).

now, I can not get it over 3300 at all, won't budge without a nice BSOD for me.

Anyone got any ideas? Temps are in the high 20's / low thirties and don't exceed 35'c under prime load. Oh and at 3300 it's 24hr prime stable.

Thanks

hougTimo

3.25Volts??????


And whats your method of cooling those thems are pretty low

Oops sorry my bad.

Voltage : 1.325, not 3.25 lol.

I'm using the stock AMD heatpipe cooler with some AS5. But my ambient temps are around 12 - 15 degrees in here, with two case fans and the side off 24/7

Thanks

HougTimo

Lucky you o.o I hope you're warm xP

Have you tried dropping the mem multi to 3x or giving the chipset volts a bump?

well they do have walls, my s939 cpu ran 2.8 solid as can be with 1.39v and now at 3.0 with 1.53-54 is still unstable, dual prime fails at 32 minutes. but im using it everyday at this voltage no bsod yet. its hit 63c once or twice so i cant go much farther with the voltage even on water