• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

GPU problem

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
science man

science man

Disabled
Joined
Jun 23, 2008
Location
Earth
Hey guys I know I said on here that I've had this problem before but it happened again and I forget what to do. Keep in mind that I don't overclock.

Code: 
[00:21:59] + 440320 bytes downloaded
[00:21:59] + 450560 bytes downloaded
[00:21:59] + 460800 bytes downloaded
[00:21:59] + 471040 bytes downloaded
[00:21:59] + 481280 bytes downloaded
[00:21:59] + 491520 bytes downloaded
[00:21:59] + 501760 bytes downloaded
[00:21:59] + 512000 bytes downloaded
[00:21:59] + 522240 bytes downloaded
[00:21:59] + 532480 bytes downloaded
[00:21:59] + 542720 bytes downloaded
[00:21:59] + 552960 bytes downloaded
[00:21:59] + 563200 bytes downloaded
[00:21:59] + 573440 bytes downloaded
[00:21:59] + 583680 bytes downloaded
[00:21:59] + 593920 bytes downloaded
[00:21:59] + 604160 bytes downloaded
[00:21:59] + 614400 bytes downloaded
[00:21:59] + 624640 bytes downloaded
[00:21:59] + 634880 bytes downloaded
[00:21:59] + 642475 bytes downloaded
[00:21:59] Verifying core Core_11.fah...
[00:21:59] Signature is VALID
[00:21:59]
[00:21:59] Trying to unzip core FahCore_11.exe
[00:21:59] Decompressed FahCore_11.exe (1843200 bytes) successfully
[00:22:04] + Core successfully engaged
[00:22:09]
[00:22:09] + Processing work unit
[00:22:09] Core required: FahCore_11.exe
[00:22:09] Core found.
[00:22:09] Working on queue slot 01 [March 26 00:22:09 UTC]
[00:22:09] + Working ...
[00:22:09]
[00:22:09] *------------------------------*
[00:22:09] Folding@Home GPU Core - Beta
[00:22:09] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[00:22:09]
[00:22:09] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 1
.00.50727.762 for 80x86
[00:22:09] Build host: amoeba
[00:22:09] Board Type: Nvidia
[00:22:09] Core      :
[00:22:09] Preparing to commence simulation
[00:22:09] - Looking at optimizations...
[00:22:09] - Created dyn
[00:22:09] - Files status OK
[00:22:09] - Expanded 67885 -> 350980 (decompressed 517.0 percent)
[00:22:09] Called DecompressByteArray: compressed_data_size=67885 data_size=350
80, decompressed_data_size=350980 diff=0
[00:22:10] - Digital signature verified
[00:22:10]
[00:22:10] Project: 5773 (Run 9, Clone 19, Gen 7)
[00:22:10]
[00:22:10] Assembly optimizations on if available.
[00:22:10] Entering M.D.
[00:22:16] mdrun_gpu returned
[00:22:16] Going to send back what have done -- stepsTotalG=0
[00:22:16] Work fraction=0.0000 steps=0.
[00:22:20] logfile size=0 infoLength=0 edr=0 trr=25
[00:22:20] - Writing 637 bytes of core data to disk...
[00:22:20] Done: 125 -> 124 (compressed to 99.2 percent)
[00:22:20]   ... Done.
[00:22:20]
[00:22:20] Folding@home Core Shutdown: UNSTABLE_MACHINE
[00:22:23] CoreStatus = 7A (122)
[00:22:23] Sending work to server
[00:22:23] Project: 5773 (Run 9, Clone 19, Gen 7)


[00:22:23] + Attempting to send results [March 26 00:22:23 UTC]
[00:22:24] + Results successfully sent
[00:22:24] Thank you for your contribution to Folding@Home.
[00:22:28] - Preparing to get new work unit...
[00:22:28] + Attempting to get work packet
[00:22:28] - Connecting to assignment server
[00:22:28] - Successful: assigned to (171.64.65.106).
[00:22:28] + News From Folding@Home: GPU folding beta
[00:22:28] Loaded queue successfully.
[00:22:29] + Closed connections
[00:22:34]
[00:22:34] + Processing work unit
[00:22:34] Core required: FahCore_11.exe
[00:22:34] Core found.
[00:22:34] Working on queue slot 02 [March 26 00:22:34 UTC]
[00:22:34] + Working ...
[00:22:34]
[00:22:34] *------------------------------*
[00:22:34] Folding@Home GPU Core - Beta
[00:22:34] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[00:22:34]
[00:22:34] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 1
.00.50727.762 for 80x86
[00:22:34] Build host: amoeba
[00:22:34] Board Type: Nvidia
[00:22:34] Core      :
[00:22:34] Preparing to commence simulation
[00:22:34] - Looking at optimizations...
[00:22:34] - Created dyn
[00:22:34] - Files status OK
[00:22:34] - Expanded 67877 -> 350980 (decompressed 517.0 percent)
[00:22:34] Called DecompressByteArray: compressed_data_size=67877 data_size=350
80, decompressed_data_size=350980 diff=0
[00:22:34] - Digital signature verified
[00:22:34]
[00:22:34] Project: 5774 (Run 5, Clone 27, Gen 23)
[00:22:34]
[00:22:34] Assembly optimizations on if available.
[00:22:34] Entering M.D.
[00:22:41] mdrun_gpu returned
[00:22:41] Going to send back what have done -- stepsTotalG=0
[00:22:41] Work fraction=0.0000 steps=0.
[00:22:45] logfile size=0 infoLength=0 edr=0 trr=25
[00:22:45] - Writing 637 bytes of core data to disk...
[00:22:45] Done: 125 -> 124 (compressed to 99.2 percent)
[00:22:45]   ... Done.
[00:22:45]
[00:22:45] Folding@home Core Shutdown: UNSTABLE_MACHINE
[00:22:48] CoreStatus = 7A (122)
[00:22:48] Sending work to server
[00:22:48] Project: 5774 (Run 5, Clone 27, Gen 23)


[00:22:48] + Attempting to send results [March 26 00:22:48 UTC]
[00:22:49] + Results successfully sent
[00:22:49] Thank you for your contribution to Folding@Home.
[00:22:53] - Preparing to get new work unit...
[00:22:53] + Attempting to get work packet
[00:22:53] - Connecting to assignment server
[00:22:54] - Successful: assigned to (171.64.65.106).
[00:22:54] + News From Folding@Home: GPU folding beta
[00:22:54] Loaded queue successfully.
[00:22:56] + Closed connections
[00:23:01]
[00:23:01] + Processing work unit
[00:23:01] Core required: FahCore_11.exe
[00:23:01] Core found.
[00:23:01] Working on queue slot 03 [March 26 00:23:01 UTC]
[00:23:01] + Working ...
[00:23:01]
[00:23:01] *------------------------------*
[00:23:01] Folding@Home GPU Core - Beta
[00:23:01] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[00:23:01]
[00:23:01] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 1
.00.50727.762 for 80x86
[00:23:01] Build host: amoeba
[00:23:01] Board Type: Nvidia
[00:23:01] Core      :
[00:23:01] Preparing to commence simulation
[00:23:01] - Looking at optimizations...
[00:23:01] - Created dyn
[00:23:01] - Files status OK
[00:23:01] - Expanded 67919 -> 350980 (decompressed 516.7 percent)
[00:23:01] Called DecompressByteArray: compressed_data_size=67919 data_size=350
80, decompressed_data_size=350980 diff=0
[00:23:01] - Digital signature verified
[00:23:01]
[00:23:01] Project: 5774 (Run 13, Clone 13, Gen 18)
[00:23:01]
[00:23:01] Assembly optimizations on if available.
[00:23:01] Entering M.D.
[00:23:08] mdrun_gpu returned
[00:23:08] Going to send back what have done -- stepsTotalG=0
[00:23:08] Work fraction=0.0000 steps=0.
[00:23:12] logfile size=0 infoLength=0 edr=0 trr=25
[00:23:12] - Writing 637 bytes of core data to disk...
[00:23:12] Done: 125 -> 124 (compressed to 99.2 percent)
[00:23:12]   ... Done.
[00:23:12]
[00:23:12] Folding@home Core Shutdown: UNSTABLE_MACHINE
[00:23:15] CoreStatus = 7A (122)
[00:23:15] Sending work to server
[00:23:15] Project: 5774 (Run 13, Clone 13, Gen 18)


[00:23:15] + Attempting to send results [March 26 00:23:15 UTC]
[00:23:17] + Results successfully sent
[00:23:17] Thank you for your contribution to Folding@Home.
[00:23:21] - Preparing to get new work unit...
[00:23:21] + Attempting to get work packet
[00:23:21] - Connecting to assignment server
[00:23:21] - Successful: assigned to (171.64.65.106).
[00:23:21] + News From Folding@Home: GPU folding beta
[00:23:21] Loaded queue successfully.
[00:23:22] + Closed connections
[00:23:27]
[00:23:27] + Processing work unit
[00:23:27] Core required: FahCore_11.exe
[00:23:27] Core found.
[00:23:27] Working on queue slot 04 [March 26 00:23:27 UTC]
[00:23:27] + Working ...
[00:23:28]
[00:23:28] *------------------------------*
[00:23:28] Folding@Home GPU Core - Beta
[00:23:28] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[00:23:28]
[00:23:28] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 1
.00.50727.762 for 80x86
[00:23:28] Build host: amoeba
[00:23:28] Board Type: Nvidia
[00:23:28] Core      :
[00:23:28] Preparing to commence simulation
[00:23:28] - Looking at optimizations...
[00:23:28] - Created dyn
[00:23:28] - Files status OK
[00:23:28] - Expanded 67895 -> 350980 (decompressed 516.9 percent)
[00:23:28] Called DecompressByteArray: compressed_data_size=67895 data_size=350
80, decompressed_data_size=350980 diff=0
[00:23:28] - Digital signature verified
[00:23:28]
[00:23:28] Project: 5774 (Run 4, Clone 10, Gen 14)
[00:23:28]
[00:23:28] Assembly optimizations on if available.
[00:23:28] Entering M.D.
[00:23:34] mdrun_gpu returned
[00:23:34] Going to send back what have done -- stepsTotalG=0
[00:23:34] Work fraction=0.0000 steps=0.
[00:23:38] logfile size=0 infoLength=0 edr=0 trr=25
[00:23:38] - Writing 637 bytes of core data to disk...
[00:23:38] Done: 125 -> 124 (compressed to 99.2 percent)
[00:23:38]   ... Done.
[00:23:38]
[00:23:38] Folding@home Core Shutdown: UNSTABLE_MACHINE
[00:23:42] CoreStatus = 7A (122)
[00:23:42] Sending work to server
[00:23:42] Project: 5774 (Run 4, Clone 10, Gen 14)


[00:23:42] + Attempting to send results [March 26 00:23:42 UTC]
[00:23:42] + Results successfully sent
[00:23:42] Thank you for your contribution to Folding@Home.
[00:23:46] - Preparing to get new work unit...
[00:23:46] + Attempting to get work packet
[00:23:46] - Connecting to assignment server
[00:23:46] - Successful: assigned to (171.64.65.106).
[00:23:46] + News From Folding@Home: GPU folding beta
[00:23:47] Loaded queue successfully.
[00:23:47] + Closed connections
[00:23:52]
[00:23:52] + Processing work unit
[00:23:52] Core required: FahCore_11.exe
[00:23:52] Core found.
[00:23:52] Working on queue slot 05 [March 26 00:23:52 UTC]
[00:23:52] + Working ...
[00:23:52]
[00:23:52] *------------------------------*
[00:23:52] Folding@Home GPU Core - Beta
[00:23:52] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[00:23:52]
[00:23:52] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 1
.00.50727.762 for 80x86
[00:23:52] Build host: amoeba
[00:23:52] Board Type: Nvidia
[00:23:52] Core      :
[00:23:52] Preparing to commence simulation
[00:23:52] - Looking at optimizations...
[00:23:52] - Created dyn
[00:23:52] - Files status OK
[00:23:52] - Expanded 67891 -> 350980 (decompressed 516.9 percent)
[00:23:52] Called DecompressByteArray: compressed_data_size=67891 data_size=350
80, decompressed_data_size=350980 diff=0
[00:23:52] - Digital signature verified
[00:23:52]
[00:23:52] Project: 5774 (Run 12, Clone 22, Gen 12)
[00:23:52]
[00:23:52] Assembly optimizations on if available.
[00:23:52] Entering M.D.
[00:23:59] mdrun_gpu returned
[00:23:59] Going to send back what have done -- stepsTotalG=0
[00:23:59] Work fraction=0.0000 steps=0.
[00:24:03] logfile size=0 infoLength=0 edr=0 trr=25
[00:24:03] - Writing 637 bytes of core data to disk...
[00:24:03] Done: 125 -> 124 (compressed to 99.2 percent)
[00:24:03]   ... Done.
[00:24:03]
[00:24:03] Folding@home Core Shutdown: UNSTABLE_MACHINE
[00:24:06] CoreStatus = 7A (122)
[00:24:06] Sending work to server
[00:24:06] Project: 5774 (Run 12, Clone 22, Gen 12)


[00:24:06] + Attempting to send results [March 26 00:24:06 UTC]
[00:24:07] + Results successfully sent
[00:24:07] Thank you for your contribution to Folding@Home.
[00:24:11] EUE limit exceeded. Pausing 24 hours.
 
Update your client? I think I see 1.19 there... 1.24 or 1.25 is out now (can't remember atm.) Pretty sure they've cleared up a lot of the unstable machine errors since 1.19.
 
The current version of the client is 6.23. p5774 requires FahCore_11 version 1.19 so that's not the issue in this case. If stopping the client and restarting doesn't fix the problem, you should first try rebooting the machine, then try reinstalling the vid drivers. Use the latest WHQL driver, 182.08 is the latest XP driver, not sure about Vista.
 
Well, I got good news and bad news.
Good news is that updating the diver fixed the unstable problem.
Bad news is it's struggling in getting my gpu to run at full or what it likes to refer to it as starting the GUI server.
 
Also I just realized that the smp I'm running is only using a quarter of my quad's power. strangly it was still working through at the speed as if all four cores were working on it so I thought cool let me try to get three more smps running but the second one I tried conflicted with the other.
 
You forgot the -smp flag.
Click to expand...

I agree.

science man said:
so I thought cool let me try to get three more smps running but the second one I tried conflicted with the other.
Click to expand...

When you run more than one client of the same type on the same system you need to change the machine ID's to something different for each client. Keep this in mind if you run two smp clients on your quad or end up running many uni core clients.
 
Zerix01 said:
When you run more than one client of the same type on the same system you need to change the machine ID's to something different for each client. Keep this in mind if you run two smp clients on your quad or end up running many uni core clients.
Click to expand...

I'll try that and if it doesn't work then I'll try the -smp flag.
Thanks.
 
Without the -smp flag, you WILL be running ONLY uni cpu WUs and make far fewer ppd.
 
Nope didn't work. ( I forgot how to do it through the client file so I reinstalled and did it the installation in the advanced options where it asks if there are addition parteners.) It's as if it pure luck to get these things working. I know technically that doesn't make sense but that's what it seems like.
 
Wait I nevermind but how do I sove the gpu problem? (post #7

EDIT: DAM IT SO CLOSE!!!
It my quad to 100% for a few secs and then this happened

Code: 
[23:57:44]
[23:57:44] *------------------------------*
[23:57:44] Folding@Home Gromacs Core
[23:57:44] Version 1.90 (March 8, 2006)
[23:57:44]
[23:57:44] Preparing to commence simulation
[23:57:44] - Ensuring status. Please wait.
[23:57:44] - Starting from initial work packet
[23:57:44]
[23:57:44] Project: 3798 (Run 25, Clone 4, Gen 6)
[23:57:44]
[23:57:44] Assembly optimizations on if available.
[23:57:44] Entering M.D.
[23:57:50] Protein: p3798
[23:57:50]
[23:57:50] Writing local files
[23:58:07] ein: p3798
[23:58:07]
[23:58:07] Writing local files
[23:59:10] l files
[23:59:10] Completed 0 out of 150000 steps  (0%)
[23:59:28] lding@home Core Shutdown: FILE_IO_ERROR
[00:00:34] f 150000 steps  (1%)
[00:01:56] Writing local files
[00:01:56] Completed 3000 out of 150000 steps  (2%)



[/coide]

Now it's running it in uni form.

SUCKS!!!!!!!!!!!!!!!!!!!!!
 
Last edited:
You must log in or register to reply here.

Similar threads

Kenrou
Frame Gen in EVERY game on EVERY GPU?!?
Replies
2
Views
520
Kenrou
Kenrou
dfonda
Gen 2 with RTX 3080 log for TPF info.
Replies
2
Views
951
dfonda
dfonda
FoldingAddict
Hung with no error
Replies
18
Views
773
Holdolin
Holdolin
W
Help. I am a total noob...
Replies
5
Views
5K
warboss2003
W
Cjwinnit
Folding@home Core Shutdown: BAD_WORK_UNIT
Replies
2
Views
706
Cjwinnit
Cjwinnit
Back