• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Alternatives to CPUz and HWMonitor (Win 8.1)

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
Well I can't find anything else in the event viewer that seems to be related to the shutdown.

Not really getting anywhere are we :(
 
Nope. I haven't gone back and re-read your other thread...

Overclocking help i7 975
http://www.overclockers.com/forums/showthread.php?t=749082

... but combined w/ the problems you were having (caused by the fans I believe?), I'd guess it's either the board or your BIOS settings. If you could fill out this BIOS template for the DFI JR X58-T3H6 w/ all your current settings, then we may be of more help...

Code: 
Genie BIOS Setting

CPU Feature
Set VR Current Limit Max: Enabled
Thermal Management Control: Disabled
EIST Function: Disabled
CxE Function: Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled

***** Logical Processor Setting *****
Intel HT Technology: Enabled
Active Processor Cores: All

DRAM Timing
Channel Interleave Setting: AUTO
Rank Interleave Setting: AUTO
Memory LowGap: 1536M

DRAM Command Rate: AUTO/1N/2N etc
CAS Latency Time (tCL): 7
RAS# to CAS# Delay (tRCD): 7
RAS# Precharge (tRP): 7
Precharge Delay (tRAS): 24
REF to ACT Delay (tRFC): AUTO
Write to PRE Delay (tWR): AUTO
Rank Write to Read (tWTR): AUTO
ACT to ACT Delay (tRRD): AUTO
Row Cycle Time (tRC): AUTO
Read CAS# Precharge (tRTP): AUTO
Four ACT WIN Time (tFAW): AUTO

Voltage Setting
O.C. Shut Down Free: Enable O.C.S.D.F
CPU VID Control: AUTO
Power Saving: Standard
Super VID: OFF
VCore Auto PSI: Disabled
OCP: 140A
DRAM Bus Voltage: 1.650v
DRAM PWM Switch Frequency: Nominal
DRAM PWM Phase Control: 2 Phase Operation
CPU VTT Special Add: AUTO
CPU VTT Voltage: 1.31v
VTT PWM Switch Frequency: Nominal
VTT PWM Phase Control: 2 Phase Operation
CPU PLL Voltage: 1.80v
IOH/ICH 1.1V Voltage: 1.11v
IOH Analog Voltage: 1.10v
ICH 1.5 Voltage: 1.5v
ICH 1.05V Voltage: 1.05v
DIMM 1/2 DQ/DQSTB Bus VREF: -00.0%
DIMM 3/4 DQ/DQSTB Bus VREF: -00.0%
DIMM 5/6 DQ/DQSTB Bus VREF: -00.0%
DIMM 1/2 ADDR/CMD Bus VREF: -00.0%
DIMM 3/4 ADDR/CMD Bus VREF: -00.0%
DIMM 5/6 ADDR/CMD Bus VREF: -00.0%
CPU Core DQ/DQSTB Bus VREF: -00.0%
CPU QPI Drive Strength: Normal
IOH QPI Drive Strength: Normal

Exit Setup Shut down: Mode 2
O.C. Fail Retry Counter: Enabled
O.C. Fail CMOS Reload: Disabled

PPM Function: Enabled
Turbo Mode Function: Disabled
1 core Max Turbo Ratio: 22x
2 core Max Turbo Ratio: 21x
3 core Max Turbo Ratio: 21x
4 core Max Turbo Ratio: 21x
CPU Non-Turbo Clock Ratio: 20x

* BCLK/UCLK/QPI Controller Settings *
QPI Control Settings: Enabled
QPI Link Fast Mode: Enabled
QPI Frequency: AUTO/4.8GT/s/5.866GT/s/6.4GT/s
CPU Base Clock (BCLK): 133 Mhz
Boot Up CPU Base Clock: AUTO
PCIE Clock: 100 Mhz
DRAM Frequency: 6x/8x/10x/12x/14x/16x Memory multipliers
UnCore Frequency: 2x to 32x Uncore multipliers (optimal to keep Uncore at 2x DRAM Frequency)

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
You might also pick up a few tips from reading through this review by eva2000 over at i4memory...

http://i4memory.com/showthread.php?t=18537
 
Ok these are the optimized defaults. If its the board is it not weird Prime runs fine with RealTemp?

Code: 
Genie BIOS Setting

CPU Feature
Set VR Current Limit Max: Disabled
Thermal Management Control: Enabled
EIST Function: Enabled
CxE Function: AUTO
Execute Disable Bit: Enabled
Virtualization Technology: Disabled

***** Logical Processor Setting *****
Intel HT Technology: Enabled
Active Processor Cores: All

DRAM Timing
Channel Interleave Setting: AUTO
Rank Interleave Setting: AUTO
Memory LowGap: 1536M

DRAM Command Rate: AUTO
CAS Latency Time (tCL): AUTO
RAS# to CAS# Delay (tRCD): AUTO
RAS# Precharge (tRP): AUTO
Precharge Delay (tRAS): AUTO
REF to ACT Delay (tRFC): AUTO
Write to PRE Delay (tWR): AUTO
Rank Write to Read (tWTR): AUTO
ACT to ACT Delay (tRRD): AUTO
Row Cycle Time (tRC): AUTO
Read CAS# Precharge (tRTP): AUTO
Four ACT WIN Time (tFAW): AUTO

Voltage Setting
O.C. Shut Down Free: Enable O.C.S.D.F
CPU VID Control: AUTO
Power Saving: Standard
Super VID: OFF
VCore Auto PSI: Disabled
OCP: 140A
DRAM Bus Voltage: 1.560v
DRAM PWM Switch Frequency: Nominal
DRAM PWM Phase Control: 2 Phase Operation
CPU VTT Special Add: AUTO
CPU VTT Voltage: 1.21v
VTT PWM Switch Frequency: Nominal
VTT PWM Phase Control: 2 Phase Operation
CPU PLL Voltage: 1.80v
IOH/ICH 1.1V Voltage: 1.11v
IOH Analog Voltage: 1.10v
ICH 1.5 Voltage: 1.5v
ICH 1.05V Voltage: 1.05v
DIMM 1/2 DQ/DQSTB Bus VREF: -00.0%
DIMM 3/4 DQ/DQSTB Bus VREF: -00.0%
DIMM 5/6 DQ/DQSTB Bus VREF: -00.0%
DIMM 1/2 ADDR/CMD Bus VREF: -00.0%
DIMM 3/4 ADDR/CMD Bus VREF: -00.0%
DIMM 5/6 ADDR/CMD Bus VREF: -00.0%
CPU Core DQ/DQSTB Bus VREF: -00.0%
CPU QPI Drive Strength: Normal
IOH QPI Drive Strength: Normal

Exit Setup Shut down: Mode 2
O.C. Fail Retry Counter: Enabled
O.C. Fail CMOS Reload: Disabled

PPM Function: Enabled
Turbo Mode Function: Enabled
1 core Max Turbo Ratio: 27x
2 core Max Turbo Ratio: 26x
3 core Max Turbo Ratio: 26x
4 core Max Turbo Ratio: 26x
CPU Non-Turbo Clock Ratio: 25x

* BCLK/UCLK/QPI Controller Settings *
QPI Control Settings: Enabled
QPI Link Fast Mode: Enabled
QPI Frequency: AUTO
CPU Base Clock (BCLK): 133 Mhz
Boot Up CPU Base Clock: AUTO
PCIE Clock: 100 Mhz
DRAM Frequency: AUTO
UnCore Frequency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
 
Last edited by a moderator:
In Event Viewer, you should be looking for things under "Error" and "Warning" The items listed in thre will give you more information about what triggered the shutdown.
 
mimart7 said:
In Event Viewer, you should be looking for things under "Error" and "Warning" The items listed in thre will give you more information about what triggered the shutdown.
Click to expand...

I did, the only errors were unrelated to the shutdown, or in better words, there was only one error for the time period of the shutdown, nothing else in there, I will clear the logs and make it shutdown again shortly to confirm there are no other logs being created.
 
Attached a screen of HW and Prime before the last crash.

Here are all the event logs in the Error and Warnings from when I started the Prime run.

Code: 
[quote=Error - Driver detected an internal error in its data structures for ]
- System 

  - Provider 

   [ Name]  sptd 
 
  - EventID 4 

   [ Qualifiers]  49156 
 
   Level 2 
 
   Task 0 
 
   Keywords 0x80000000000000 
 
  - TimeCreated 

   [ SystemTime]  2014-08-27T11:51:15.045921200Z 
 
   EventRecordID 2626696 
 
   Channel System 
 
   Computer AJ-PC 
 
   Security 
 

- EventData 

    
   000000000100000000000000040004C0530000000000000000000000000000000000000000000000 


--------------------------------------------------------------------------------

Binary data:


In Words

0000: 00000000 00000001 00000000 C0040004 
0010: 00000053 00000000 00000000 00000000 
0020: 00000000 00000000   


In Bytes

0000: 00 00 00 00 01 00 00 00   ........
0008: 00 00 00 00 04 00 04 C0   .......À
0010: 53 00 00 00 00 00 00 00   S.......
0018: 00 00 00 00 00 00 00 00   ........
0020: 00 00 00 00 00 00 00 00   ........
[/quote]

[quote= Warning - The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000]
- System 

  - Provider 

   [ Name]  Microsoft-Windows-Kernel-PnP 
   [ Guid]  {9C205A39-1250-487D-ABD7-E831C6290539} 
 
   EventID 219 
 
   Version 0 
 
   Level 3 
 
   Task 212 
 
   Opcode 0 
 
   Keywords 0x8000000000000000 
 
  - TimeCreated 

   [ SystemTime]  2014-08-27T11:51:26.202185800Z 
 
   EventRecordID 2626710 
 
   Correlation 
 
  - Execution 

   [ ProcessID]  4 
   [ ThreadID]  208 
 
   Channel System 
 
   Computer AJ-PC 
 
  - Security 

   [ UserID]  S-1-5-18 
 

- EventData 

  DriverNameLength 13 
  DriverName ROOT\WPD\0000 
  Status 3221226341 
  FailureNameLength 14 
  FailureName \Driver\WudfRd 
  Version 0 
[/quote]

[quote=The previous system shutdown at 18:13:36 on ‎27/‎08/‎2014 was unexpected.]
- System 

  - Provider 

   [ Name]  EventLog 
 
  - EventID 6008 

   [ Qualifiers]  32768 
 
   Level 2 
 
   Task 0 
 
   Keywords 0x80000000000000 
 
  - TimeCreated 

   [ SystemTime]  2014-08-27T11:52:49.000000000Z 
 
   EventRecordID 2626699 
 
   Channel System 
 
   Computer AJ-PC 
 
   Security 
 

- EventData 

   18:13:36 
   ‎27/‎08/‎2014 
    
    
   9655 
    
    
   DE07080003001B0012000D002400EC01DE07080003001B0008000D002400EC01600900003C000000010000006009000001000000B00400000100000000000000 


--------------------------------------------------------------------------------

Binary data:


In Words

0000: 000807DE 001B0003 000D0012 01EC0024 
0010: 000807DE 001B0003 000D0008 01EC0024 
0020: 00000960 0000003C 00000001 00000960 
0030: 00000001 000004B0 00000001 00000000 


In Bytes

0000: DE 07 08 00 03 00 1B 00   Þ.......
0008: 12 00 0D 00 24 00 EC 01   ....$.ì.
0010: DE 07 08 00 03 00 1B 00   Þ.......
0018: 08 00 0D 00 24 00 EC 01   ....$.ì.
0020: 60 09 00 00 3C 00 00 00   `...<...
0028: 01 00 00 00 60 09 00 00   ....`...
0030: 01 00 00 00 B0 04 00 00   ....°...
0038: 01 00 00 00 00 00 00 00   ........
[/quote]

[quote=Error - WLAN Extensibility Module has failed to start.

Module Path: C:\WINDOWS\system32\athExt.dll
Error Code: 126]
- System 

  - Provider 

   [ Name]  Microsoft-Windows-WLAN-AutoConfig 
   [ Guid]  {9580D7DD-0379-4658-9870-D5BE7D52D6DE} 
 
   EventID 10000 
 
   Version 0 
 
   Level 2 
 
   Task 0 
 
   Opcode 0 
 
   Keywords 0x4000000000000000 
 
  - TimeCreated 

   [ SystemTime]  2014-08-27T11:52:50.894575200Z 
 
   EventRecordID 2626724 
 
   Correlation 
 
  - Execution 

   [ ProcessID]  1440 
   [ ThreadID]  1872 
 
   Channel System 
 
   Computer AJ-PC 
 
  - Security 

   [ UserID]  S-1-5-18 
 

- EventData 

  ExtensibleModulePath C:\WINDOWS\system32\athExt.dll 
  ErrorCode 126 
[/quote]

[quote= Error - Faulting application name: nvvsvc.exe, version: 8.17.12.7533, time stamp: 0x4dd742d4
Faulting module name: nvvsvc.exe, version: 8.17.12.7533, time stamp: 0x4dd742d4
Exception code: 0xc0000005
Fault offset: 0x000000000004e437
Faulting process ID: 0x4d8
Faulting application start time: 0x01cfc1ed6ce20656
Faulting application path: C:\Windows\system32\nvvsvc.exe
Faulting module path: C:\Windows\system32\nvvsvc.exe
Report ID: afb7d7e9-2de0-11e4-bf5b-000129223d66
Faulting package full name: 
Faulting package-relative application ID: ]
- System 

  - Provider 

   [ Name]  Application Error 
 
  - EventID 1000 

   [ Qualifiers]  0 
 
   Level 2 
 
   Task 100 
 
   Keywords 0x80000000000000 
 
  - TimeCreated 

   [ SystemTime]  2014-08-27T11:52:58.000000000Z 
 
   EventRecordID 130617 
 
   Channel Application 
 
   Computer AJ-PC 
 
   Security 
 

- EventData 

   nvvsvc.exe 
   8.17.12.7533 
   4dd742d4 
   nvvsvc.exe 
   8.17.12.7533 
   4dd742d4 
   c0000005 
   000000000004e437 
   4d8 
   01cfc1ed6ce20656 
   C:\Windows\system32\nvvsvc.exe 
   C:\Windows\system32\nvvsvc.exe 
   afb7d7e9-2de0-11e4-bf5b-000129223d66 
[/quote]

[quote= Error - The NVIDIA Display Driver Service service terminated unexpectedly. It has done this 1 time(s).]
- System 

  - Provider 

   [ Name]  Service Control Manager 
   [ Guid]  {555908d1-a6d7-4695-8e1e-26931d2012f4} 
   [ EventSourceName]  Service Control Manager 
 
  - EventID 7034 

   [ Qualifiers]  49152 
 
   Version 0 
 
   Level 2 
 
   Task 0 
 
   Opcode 0 
 
   Keywords 0x8080000000000000 
 
  - TimeCreated 

   [ SystemTime]  2014-08-27T11:52:59.569290400Z 
 
   EventRecordID 2626726 
 
   Correlation 
 
  - Execution 

   [ ProcessID]  284 
   [ ThreadID]  4132 
 
   Channel System 
 
   Computer AJ-PC 
 
   Security 
 

- EventData 

  param1 NVIDIA Display Driver Service 
  param2 1 
   6E0076007300760063000000 


--------------------------------------------------------------------------------

Binary data:


In Words

0000: 0076006E 00760073 00000063  


In Bytes

0000: 6E 00 76 00 73 00 76 00   n.v.s.v.
0008: 63 00 00 00               c...

[/quote]

[quote= Error - - System 

  - Provider 

   [ Name]  Service Control Manager 
   [ Guid]  {555908d1-a6d7-4695-8e1e-26931d2012f4} 
   [ EventSourceName]  Service Control Manager 
 
  - EventID 7034 

   [ Qualifiers]  49152 
 
   Version 0 
 
   Level 2 
 
   Task 0 
 
   Opcode 0 
 
   Keywords 0x8080000000000000 
 
  - TimeCreated 

   [ SystemTime]  2014-08-27T11:52:59.569290400Z 
 
   EventRecordID 2626726 
 
   Correlation 
 
  - Execution 

   [ ProcessID]  284 
   [ ThreadID]  4132 
 
   Channel System 
 
   Computer AJ-PC 
 
   Security 
 

- EventData 

  param1 NVIDIA Display Driver Service 
  param2 1 
   6E0076007300760063000000 


--------------------------------------------------------------------------------

Binary data:


In Words

0000: 0076006E 00760073 00000063  


In Bytes

0000: 6E 00 76 00 73 00 76 00   n.v.s.v.
0008: 63 00 00 00               c...
]
- System 

  - Provider 

   [ Name]  SamsungAllShareV2.0 
 
  - EventID 0 

   [ Qualifiers]  0 
 
   Level 2 
 
   Task 0 
 
   Keywords 0x80000000000000 
 
  - TimeCreated 

   [ SystemTime]  2014-08-27T11:55:02.000000000Z 
 
   EventRecordID 130637 
 
   Channel Application 
 
   Computer AJ-PC 
 
   Security 
 

- EventData 

   Service cannot be started. System.NullReferenceException: Object reference not set to an instance of an object. at AllShareDmsUtil.Configuration.ConfigurationManager.GetSharingFolderList() at AllShareDmsUtil.Manager.AllShareDmsManager.LoadSharingFolderList() at AllShareDmsUtil.Manager.AllShareDmsManager.InitContentsDirectoryManager() at AllShareDmsUtil.Manager.AllShareDmsManager.Initialize() at AllShareDmsUtil.Manager.AllShareDmsManager..ctor() at AllShareDmsUtil.Manager.AllShareDmsManager.get_Instance() at AllShareDMS.AllShareDMS.DoStart() at AllShareDMS.AllShareDMS.OnStart(String[] args) at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state) 
[/quote]

Does this help at all? I can do it again see if it generates any different logs?
 

Attachments

  • Screen.png
    Screen.png
    141.4 KB · Views: 257
Last edited by a moderator:
Have to wonder why you have an Nvidia display error when using a Radeon card. ?
 
Well I removed old drivers, but I get conflicting reports on some drivers, it tells me some intel drivers are out of date, version like 9.x.x to a slightly newer version, but then I download from intel and it tells me I'm version 10.x.x...

Anyway, still crashed, only report that seems to be popping out to me is the 'The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000' and 'Driver detected an internal error in its data structures for' errors.
 
You only want it to remove drivers. Don't let it check for outdated drivers. Just use the free version.

That error may be for a usb driver, possibly for a smart phone. Do you have a Samsung phone pluuged into your usb drive?
 
mimart7 said:
You only want it to remove drivers. Don't let it check for outdated drivers. Just use the free version.

That error may be for a usb driver, possibly for a smart phone. Do you have a Samsung phone pluuged into your usb drive?
Click to expand...

Yeh I checked the errors out, one I think is something related to Daemon tools or something like that, most are nothing, just USB stuff.

I'm finding this quiet weird, am I safe to OC with RealTemp, since the PC doesnt restart with that?.... Removed the Nvidea drivers and the PC still crashed but the errors no longer showed up, will try again soon with the other errors I've hopefully cleaned up, but none of them seem to be related to the crash...

Is there a third party crash log tool I can use that might give me more detailed reason as to why its shutting down?
 
One of my concerns, is that if the system keeps crashing, eventually your Windows install will become corrupted.
 
Nope, checked the settings, re-crashed and there is no .dmp file anywhere.... It doesn't BSOD tho, just turns off....

This is the only error I've not been able to sort out

Error - The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000. said:
- System

- Provider

[ Name] Microsoft-Windows-Kernel-PnP
[ Guid] {9C205A39-1250-487D-ABD7-E831C6290539}

EventID 219

Version 0

Level 3

Task 212

Opcode 0

Keywords 0x8000000000000000

- TimeCreated

[ SystemTime] 2014-08-27T17:17:57.014958400Z

EventRecordID 2626876

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 224

Channel System

Computer AJ-PC

- Security

[ UserID] S-1-5-18


- EventData

DriverNameLength 13
DriverName ROOT\WPD\0000
Status 3221226341
FailureNameLength 14
FailureName \Driver\WudfRd
Version 0
Click to expand...
 
You must log in or register to reply here.

Similar threads

N
CPU unstable no matter what I do, and it's getting worse
2
Replies
25
Views
1K
mackerel
mackerel
mackerel
HT perf and power scaling on 12100F
Replies
0
Views
82
mackerel
mackerel
W
Gigabyte B650 Aorus Elite AX v1.0 - unable to flash BIOS
Replies
14
Views
2K
Whity67
W
Kenrou
Bluetooth and Chrome
Replies
10
Views
99
Kenrou
Kenrou
mackerel
X299 and 7980XE in 2024
2 3 4 5
Replies
90
Views
3K
TechStuff
T
Back