Are these temperatures OK?

[the-tazs]

Hi just overclocked my AMD FX8120 to 4.1GHZ and ran prime95 for 60mins,all was stable no errors & no warnings have a screenshot of the temperature below do thay look ok? or are thay to high.dont know what the max temp is on this cpu,any info would be great.

By thetazs at 2012-04-28

 

[Nebulous]

Those temps are perfect!

 

[irrykuxeh]

Looks great. Nothing wrong with those temps

 

[trents]

Did you take the screen shot of HWMonitor during the Prime95 stress test, before, or after? The reason I 'm asking is there is almost not variation in the temps from max to min like you would be if HWMonitor were open before you started Prime.

 

[Joni]

Did you run Prime95 with 8 threads?

 

[trents]

Did you run Prime95 with 8 threads?

Good question. Prime95 only shows one core worker pane.

 

[the-tazs]

Joni= yes i ran prome95 with 8 threads,
Trents=Hwm was run at the end of the test
will run prime95 now with hwm to show min and max temps

here are the screenshoot

By thetazs at 2012-04-29

By thetazs at 2012-04-29

 

[trents]

Temps still look great! What are you cooling it with? You will need to pass Prime95 for at least 2 hours to establish that you are stable.

 

[the-tazs]

My cooling system for my CPU is a moded Corsair H60 configuration is as follows
1...outlet from reservoir to inlet of H60 block & pump
2...outlet from H60 to H60 120mm rad (push/pull config)
3...from H60 rad to 240 rad
4...from 240 rad to inlet of reservoir
The red arrows the air flow of all fans in the case

By thetazs at 2012-04-29