BITSPOWER Z-Multi 250mm Reservoir - where to buy

[Zgiera]

Hi there,
I have a small issue with reservoir BITSPOWER Z-Multi 250mm
https://www.caseking.de/bitspower-z...u-121.html?sPartner=185?campaign=psm/geizhals

which comes with only one port on the top and three port connectors on the bottom.

Unfortunately I need more than two ports on the bottom and 2 ports on the top of reservoir.
so my question is there any place to buy the topr with three ports connectors only as a separate part of reservoir (online shop, trade market, etc.?)

Regards

 

[ATMINSIDE]

What are you trying that makes you need more than one top port?

 

[Zgiera]

I need one port to connect with radiator.

second port need to use as Pressure equalisation membrane G1/4, tall version
http://shop.aquacomputer.de/product_info.php?products_id=2933
for Aquacomputer pressure sensor delta 40
Pressure sensor mps pressure Delta 40
http://shop.aquacomputer.de/product_info.php?products_id=2902

and also need another port as a filling port

basically I need to connect pressure sensor to water tank to know what is liquid level in water tank. as far as I know I need two ports, one on the top and second on the bottom of reservoir

 

[ATMINSIDE]

You don't need that membrane, just bleed the system properly when filling.

Use the top port as the fill port, the bottom port that has the tube as the return port, and a bottom port to go directly to the pump inlet.

 

[Zgiera]

Allright,
that is great idea
I was thinking I don't need that membrane when the system is bleed properly after filling but at different forum I was told that I need it which makes me little confused.
also I wasn't sure about filling port, so I can use that port with aqua pipe on the bottom of reservoir.
I presume that aquapipe which comes with reservoir is made for as return port? isn't? or it has different purpose?
Cheers

 

[ATMINSIDE]

By return port, that's where you'd connect your last component before the reservoir.
Yes, it's made for being a return port.

For the fill port, use the top port of the reservoir.

And again, make sure to connect the pump inlet directly to one of the bottom ports of the reservoir.

 

[Zgiera]

By return port, that's where you'd connect your last component before the reservoir.
Yes, it's made for being a return port.

For the fill port, use the top port of the reservoir.

And again, make sure to connect the pump inlet directly to one of the bottom ports of the reservoir.

I already have all the parts to connect reservoir with pressure sensor. Which is

AQUACOMPUTER Pressure Sensor mps Pressure Delta 40
https://www.caseking.de/en/aqua-computer-drucksensor-mps-pressure-delta-40-wazu-325.html

AQUACOMPUTER Push-in connector for 6 mm hoses, G 1/4 thread
http://shop.aquacomputer.de/product_info.php?products_id=2910

AQUACOMPUTER Tubing PUR black 6/4 mm
http://shop.aquacomputer.de/product_info.php?products_id=2907

AQUACOMPUTER Pressure equalisation membrane G1/4, tall version
http://shop.aquacomputer.de/product_info.php?products_id=2933

AQUACOMPUTER Push-in connector for 6 mm hoses, M5 thread
http://shop.aquacomputer.de/product_info.php?products_id=2909

I have connected one of the outlets with in the bottom of reservoir into pressure sensor delta 40 and (High port)
I fitted membrane from AquaComputer on the top of reservoir
And it works great

Thanks for your help

 

[ATMINSIDE]

Glad you got everything and it's working well!