- Joined
- Aug 23, 2007
I have been tweaking my new custom loop and noticed that a new Cinebench R20 was released so here are my 1st results at 5GHz 1.26v. I can bench completely stable at 5.3ghz and boot at 5.4ghz w/ out much issue. I'm using 5ghz as my 24/7 as the voltage differences are large and so are the temps.
EC_TEMP 1/System2 is my coolant temperature. I ran this after having ran prime95 for about 20 minutes.
EC_TEMP 1/System2 is my coolant temperature. I ran this after having ran prime95 for about 20 minutes.
Last edited: