GIGABYTE X58A-UD7 GETTING REAY TO TURN & BURN

[TURN & BURN]

If you have a Classified E759, I would definitely pop that W3570 in there and play with it until your new board arrives on Monday

Selling it had 2 of them LOL nice boads but time to move on.

T&B

 

[ghost_recon88]

Unless it's still sealed, play with it until it sells

 

[TURN & BURN]

Unless it's still sealed, play with it until it sells

Open used it 3 weeks maybe ill get lucky and it wont sell!! ha-ha man I have to get that other Gig board and see if it has the same issue with the Multi!! and the water for the NB in Monday as well so might be a delay on total review.

T&B

 

[TURN & BURN]

OK folks stay tuned

Got new bios from [email protected]; F3c will be givinh it a whirl in a few hours

http://www.4shared.com/file/165311425/11d490d9/X58AUD7_bios_f3c.html

Finger X lets hope this takes care of the Muktiplyer if so I will post the bios for anyone else thats having this issue.

Be back soon with the good/bad news!!!!

T&B

 

[TURN & BURN]

YESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS Thank you Gigabyte THANK YOU Janus.Yeh in business now Bios F3c fixed multiplyer issue see screens a fast check 4.1 with no volts change all at stock except the memory!!!!! looking to get busy now expect some good benching coming up as long as nothing else crops up>>>>>>>>>>

http://www.4shared.com/file/165326870/cfa42b1e/BIOS_F3c_A_HOOT_YES_STOCK.html

And for anyone in need here is the link for the Bios F3c plese be careful loading I dont recomend the utilty flash you know the RIGHT WAY!!!!

http://www.4shared.com/file/165311425/11d490d9/X58AUD7_bios_f3c.html

We are one the way now!!! Stay tuned I think theres someone else with the same board I invited them along so we may get better results on one thread.

T&B

 

[TURN & BURN]

Good things are coming now I can say I LOVE this board ha-ha here is a shot before I have to run to a few stores check on the memory up up and away!!!! just had to pinch myself to make sure its not a DREAM...........

http://www.4shared.com/file/165309759/adb1f533/In_Business_F3c_Bios_Multiplie.html

Theses F3c Bios seem to be the right stuff for now

"And the games a foot"

Again thanks to Janus.Yeh form Gigabyte for the quick responce and help super ++++++

T&B

 

[TURN & BURN]

OK some Super PI runs @ 4.35 Stock volts memory @2240Mhz

http://www.4shared.com/file/165437550/6d93a4a2/super_pi_all_but_32M.html

http://www.4shared.com/file/165437321/51587e41/spuer_pi_32M_24_iterations.html

Crank it up later!!!!!! just a taste.......

T&B

 

[TURN & BURN]

Back will be updating later and 2 stage -100 + cascade being built for the Gulftowns

Will be posting bios screens as well.

T&B

 

[TURN & BURN]

Bio's Shots First


http://www.4shared.com/file/165751708/3104d469/DSCN5548.html

http://www.4shared.com/file/165753097/df3facbf/DSCN5549.html

http://www.4shared.com/file/165753968/c7c9966e/DSCN5550.html

http://www.4shared.com/file/165754659/d688abf/DSCN5551.html

http://www.4shared.com/file/165754963/cdcc775f/DSCN5553.html

http://www.4shared.com/file/165756334/89415be4/DSCN5554.html

http://www.4shared.com/file/165757540/7d5c12ed/DSCN5555.html

Next some 06M and Super PI

T&B

 

[Ross]

Back will be updating later and 2 stage -100 + cascade being built for the Gulftowns

Will be posting bios screens as well.

T&B

What cascade being built for the Gulftowns? You have someone building one for you? You'd probably be better off with LN2 for the GTs temp-wise, but I've yet to have any Giga board that would go lower than -105 to -110C without rebooting. Cascade would be perfect for that I am always hopeful the next Giga board I get fixes that temp limit.

Is Janus a BIOS person at GBT or just a contact you have? I need the multi fixed on X58-UD4P pronto!

LOL at the ICH Core voltage

 

[TURN & BURN]

What cascade being built for the Gulftowns? You have someone building one for you? You'd probably be better off with LN2 for the GTs temp-wise, but I've yet to have any Giga board that would go lower than -105 to -110C without rebooting. Cascade would be perfect for that I am always hopeful the next Giga board I get fixes that temp limit.

Is Janus a BIOS person at GBT or just a contact you have? I need the multi fixed on X58-UD4P pronto!

LOL at the ICH Core voltage

He works for Gigabyte great guy just send a e mail excatly the issue and your needs he dose his best!!!!

The cascade will be a 2 stage high power -100+ with a value for minor adj. so i can tweak accordingly!!

Now a few screens as to why i need to get the cascade!!!! be right back

T&B

 

[TURN & BURN]

HOT RUNS

http://www.4shared.com/file/165797615/b7f7417f/just_under_5000_06_Masrks.html

http://www.4shared.com/file/165798046/f678864/Super_PI_5000.html

Tomorrow some 03 M and Linx runs

T&B

 

[Ross]

I can't believe it's doing 3D06 there on a SS. Nice low Vc too, great proc.

 

[TURN & BURN]

I can't believe it's doing 3D06 there on a SS. Nice low Vc too, great proc.

THX yes I think i'm in love again ha-ha still have my 141-759 but i'm happy so far with this so far still only the second day of play!!! tomorrow night another round.

Now the setup simple easy and all on a tinny table top 2'x18" gotta love open end systems....

UGGGGGGGGS he-he

T&B

 

[TURN & BURN]

OK back next up 920!!!!!!

T&B

 

[Ross]

Good, I want to see max BCLK

 

[icebob]

I can't believe it's doing 3D06 there on a SS. Nice low Vc too, great proc.

+1 would like to see details tab

 

[TURN & BURN]

GAD NEWS

Loaded the 920 seems to have a memory issue or the memory controler shottttttttttttttttttttttt

Will try again tomorrow with different memory and board just to make sure if so then wont get a replacement till next week sometime.

DAMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM

T&B

 

[TURN & BURN]

X58-UD7 i7 920

OK have a crapo chipper but ran anyway can't control memory has to be on AUTO YIKES!!!! but mamaged a 225 BLCK @X21 on SS

Need a better chipper or change out memory I think!!!!

TB

 

[TURN & BURN]

X58-UD7 i7 920 225 BLCK

Here ya go but memory issues on AUTO!!!!

T&B