HELP with new computer

[4eluskin]

I have a very strange issue. I have bought a new computer. When I enter in game, after long\short time speaker beeps one or two times. Beep lenght is +-1 sec. I noticed thst it happens when speedfan, siw, hwmonitor show that tmpin 2, temp 2 are >60 degrees. Everything another are <60degrees. Some times GPU is 65-66 degrees. In bios I have turned off all alarms\warnings. Why does it happen??

-----------
System Information
-----------
Time of this report: 6/30/2013, 13:37:52
Machine name: ZLO-ПК
Operating System: Windows 7 Максимальная 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318–1533)
Language: Russian (Regional Setting: Russian)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: GA-970A-D3
BIOS: Award Modular BIOS v6.00PG
Processor: AMD FX™-8320 Eight-Core Processor (8 CPUs), ~3.5GHz
Memory: 8192MB RAM
Available OS Memory: 8174MB RAM
Page File: 2247MB used, 14096MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode

-------
DxDiag Notes
-------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Input Tab: No problems found.

---------
Display Devices
---------
Card name: AMD Radeon HD 7900 Series
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x679A)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_679A&SUBSYS_254C1458&REV_00
Display Memory: 2781 MB
Dedicated Memory: 3047 MB
Shared Memory: 3830 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: LG 23EA63(HDMI)
Monitor Model: 23EA63
Monitor Id: GSM598E
Native Mode: 1920 x 1080§ (60.000Hz)
Output Type: HDMI

 

[mokrunka]

Is it the PC Case speaker that is beeping? e.g. not the actual audio speakers?

Which game are you playing?

Do your temp monitoring tools have alarms set for a certain temperature? Try checking that to see if they are set too low for some reason (although 60C should not be cause for immediate concern). Are there any other beep codes that come up during POST (boot)? See here for a list of your motherboard's beep codes and how to decipher them: http://www.manualowl.com/m/Gigabyte/GA-970A-D3/Manual/210498?page=87

 

[Conumdrum]

Is it under warranty? If so send it back.

 

[mokrunka]

Is it under warranty? If so send it back.

+1, didn't even think of that. Much better idea to return it/call tech support if you bought this from a retailer somewhere.

Good call, con

 

[Conumdrum]

And seeing this: best of luck.

Machine name: ZLO-ПК
Operating System: Windows 7 Максимальная 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318–1533)
Language: Russian (Regional Setting: Russian)

There has to be some local forums with help there. Long distance T-shooting don't help much, not a lot we can do except start the standard temp issues, running mem tests etc, swapping parts/replacing parts. I can imagine the warranty issues eh?

 

[4eluskin]

I found the problem. The problem is in north bridge. He becomes >60degrees. Is it normal for this motherboard?? or I have to cool it???

 

[kyij]

I found the problem. The problem is in north bridge. He becomes >60degrees. Is it normal for this motherboard?? or I have to cool it???

60C sounds high to me, but it will all depend on the board. Like they said, sent it back if it is under warranty. If not, maybe look into at least applying some thermal paste to the heatsink and the bridge. If that does not work, you will have to get a aftermarket cooler for it.