How high is high with your 8RDA+/8RDA3+ ?

[Tekime]

Board = EPoX 8RDA+
Board revision = 1.1
Stepping Northbridge = A1 (Crush 18D)
Original CPU rate & stepping = 1700+ (1.47GHz) DLT3C JIUHB:0310XPMW
Current CPU rate = 2.3GHz
Multiplier = 10.5
FSB = 220
Vcore = 1.75v
Vdd = 1.65
Vddr = 2.65
Vdd mod = no
Vddr mod = no
Memory timings = 2-3-3-7
Memory sync = yes
Dual DDR mode = no
Memory type & size = Kingston HyperX PC3500 1x512MB
Cooling - CPU = SK7 & TTSF II
Cooling - Northbridge = Vantec Copper Iceberq (A1C)
Cooling - Southbridge = stock 8rda+ northbridge HS
Cooling other components = MOSFETS are sinked
PSU = Antec True480
Stability = 100% Prime95 (16+ hrs.), 100% 3DMark & BF1942
Normal conditions (24/7) = Closed case 2x92mm (1 intake, one exhaust), 2x80mm (1 intake, 1 exhaust). 31c ambient, 37c case, 46c CPU

 

[cV]

Board = EP-8RDA+
Board revision = 1.1
Stepping Northbridge = A3
Original CPU rate & stepping = 1467MHz, JIUHB 0310 "B"
Current CPU rate = 2400MHz
Multiplier = 12
FSB = 200
Vcore = 1.85
Vdd = 1.85
Vddr = 2.77
Vdd mod = 680ohm for +.25v
Vddr mod = no
Memory timings = CL2, 3-2-2
Memory sync = check, 100%
Dual DDR mode = no
Memory type & size = Corsair PC3200 512MB single (winbond BH-6)
Cooling - CPU = MCX462+ With aero blower
Cooling - Northbridge = Aluminum Pin-fin heatsink with delta 50mm
Cooling - Southbridge = stock 8KHA+ NB HSF
Cooling other components = MOSFETs - major section of aero skived copper heatsink with 50mm fan, VDD MOSFET, VREG chip
PSU = Antec True550
Stability = 100% Prime, 100% 3dmark, 100% Burnk7
Normal conditions (24/7) = closed case (liteon FS020) 3x sunon KD1212PMB1-6A 120×38mm, 1 intake 2 exhaust; 34C ambient, 42C northbridge, 50-54C CPU (thermistor)

Only thing holding me back is cooling, air doesn't really cut it anymore...

 

[HeXaDeCiMaL]

Board = 8RDA+
Board revision = 1.1
Stepping Northbridge = A2 (acccording to wincpuid)
Original CPU rate & stepping = XP2100+ (1.733Ghz) 0308
Current CPU rate = 2.425Ghz
Multiplier = 11.5
FSB = 211
Vcore = 2.00V
Vdd = 1.78V
Vddr = 2.9V
Vdd mod = YES
Vddr mod = NO
Memory timings = CAS2 5,2,2
Memory sync = 100%
Dual DDR mode = YES
Memory type & size = Corsair XMS 3200 CAS2 256Mb x 2
Cooling - CPU = SLK800 + 45CFM YS-Tech
Cooling - Northbridge = Titan Copper active NB cooler
Cooling - Southbridge = Zalman Passive
Cooling other components = NO
PSU = Chieftec 340W
Stability = Total (prime95, 3dmark, folding@home, SETI, games)
Normal conditions (24/7) = Chieftec Scorpio case closed, 3 x 80mm intake, 2x 80mm exhaust, case temp ~23C, CPU load temp ~53C