How to overclock Ballistix Sport LT 16GB Single DDR4 2400 MT/s (PC4-19200)?

[Konfl1kt]

Hello guys!
Can you help me choose right parameters for overclock my memory please?

My PC:
Operating System
Windows 10 Pro 64-bit
CPU
Intel Core i7 7700K @ 4.20GHz 33 °C (Overclocked 5.0 GHz)
Kaby Lake 14nm Technology
RAM
16.0GB Single-Channel Unknown @ 1200MHz (15-15-15-35)
Motherboard
ASUSTeK COMPUTER INC. MAXIMUS IX FORMULA (LGA1151) 30 °C
Graphics
XB271HU (2560x1440@144Hz)
NVIDIA GeForce GTX 1080 Ti (EVGA) 26 °C
Storage
447GB OCZ-VECTOR180 (SSD) 36 °C
447GB OCZ-ARC100 (SSD)
1788GB Intel Raid 0 Volume (RAID) SSD 2 x OCZ Vertex 180 1Tb

 

[||Console||]

Open CPUz to the SPD tab start with those settings

 

[Konfl1kt]

Thank you very much for your response.
I opened CPU-Z but it showed me a stock parameters.
Can you enplane me what should I do please?

 

[||Console||]

I cant give you any specfics I though you didnt know what to set for your ram timmings . Hence the SPD tab , you can now look around and find what IC's are on your ram then compaire to what others with same IC's are able to get . Lots of trial and error .
My self I dont really waste time on timmings for 24/7 settings as it the gains are very low in gaming.

 

[Woomack]

All Crucial kits below 3000 are based on Micron IC. Almost all microns OC the same so between 2800 and 3200, depends on luck and settings.
Here are 2 of my short reviews based on 2x16GB kits but used IC should be about the same as in 2x8GB ( just dual rank so in theory harder to OC ):
http://www.overclockers.com/forums/...ix-Sport-LT-2x16GB-DDR4-2400-BLS2K16G4D240FSE
http://www.overclockers.com/forums/...ix-Sport-LT-2x16GB-DDR4-2666-BLS2K16G4D26BFSC

 

[Konfl1kt]

Thank you Woomack.
For some reason my system is not boot up with 1.35V/2800.
Also 1.2V/2800 doesn't work for me.
2666/1.2 works fine.


How can I reach 2800/3000?

 

[Tír na nÓg]

RAise the system agent with +0.100/0.150v offset for boot issues.

 

[Konfl1kt]

RAise the system agent with +0.100/0.150v offset for boot issues.

I am sorry, but I am not sure that I have understood you correctly. I need increase voltage up to 1.5?

 

[Tír na nÓg]

No, System Agent voltage, usually VSSA, offset +0.100v.

DO NOT INCREASE THE VCORE TO 1.5v! You'll burn the chip.

 

[Konfl1kt]

Thank you Tír na nÓg.
I found it:

Looks like this parameter for CPU, is it correct?
When I do that, should I set 2800 or just boot up?

 

[Tír na nÓg]

NO!

- - - Updated - - -

VCCSA, below VCCIO

 

[Konfl1kt]

Tír na nÓg, thank you for you patience...


Still don't understand how can I add offset...

 

[Tír na nÓg]

Yes!

Try offset +0.100v

 

[Konfl1kt]

I can't replace 'Auto'. How can I do that? Sorry for these questions... I tried to find info but nothing about my mobo.
Update: It's works well 1.3500V/2666/16/16/16/39.
If my voltage works with 2666 maybe I need change timing?
But I got 2666 on both voltages (1.3500 or 1.2000).

 

[Tír na nÓg]

SO, either increase frequency or tighten timings. (heck, I get good at this! ).

 

[Konfl1kt]

Tír na nÓg thank you.
Can you give me example please? For next step.

Updated:
If I stuck on 2666 better switch to 1.2000?

 

[Tír na nÓg]

Yep, download CPUz (https://www.cpuid.com/softwares/cpu-z.html) , go to SPD tabs and take a screen shot. We can work it from there

 

[Konfl1kt]

It shows 1200MHz, but it's 1333. Voltage now is 1.3500.

Thank you.

 

[||Console||]

Yep, download CPUz (https://www.cpuid.com/softwares/cpu-z.html) , go to SPD tabs and take a screen shot. We can work it from there

look @ post 3

 

[Konfl1kt]

look @ post 3

Where?