Marathon: February CineBench

[trailertrash13]

AMD|trailertrash13|FX-8350|water|9.16

 

[trailertrash13]

and dont forget these

 

[Robert17]

Well done TT !

 

[trailertrash13]

AMD|trailertrash13|FX-8350|water|9.28
well i think this is it. unless i find some better tweeks i dont think i can do any better. i had the water temp showing down to about 6.5 to 7.8 c lol

 

[Luis_GT]

Well, I tried all I could... unless an ice age happens and I can get ambient temp below 19C I don't think I can get close to that Sandy...

Intel|Luis_GT|3770K|Water|10.66

 

[Mindrot]

Lmao that is the most clever solution to temperature control that I have ever seen

 

[Mandrake4565]

AMD|trailertrash13|FX-8350|water|9.28
well i think this is it. unless i find some better tweeks i dont think i can do any better. i had the water temp showing down to about 6.5 to 7.8 c lol

nice run TT.

 

[OCMusicJunkie]

AMD|trailertrash13|FX-8350|water|9.28
well i think this is it. unless i find some better tweeks i dont think i can do any better. i had the water temp showing down to about 6.5 to 7.8 c lol

Nice run... don't think I'm going to be catching the water guys with air this month. I've got a case now but can't decide on closed loop or custom H20, so I think you've got me beat.

Is that 1.726 vcore!? I have to ask what CPU/NB voltage you guys run when you have your CPU that high....

 

[trailertrash13]

1.65 or 1.62 vcore and i pushed the cpu/nb up to about 1.4ish when i resize the pics to fit the mb for up loading they get fuzzy

edit yeah 1.72 i was getting mad at the lock-ups so i said f-it and pushed then walked away and tryed some thing else and got lucky. went back to reading some of the guides and though i was pushing to hard so went lower and tryed again. i got lucky on that one lol

 

[ivanlabrie]

Wow, be careful man...you're gonna burn that thing. NB volts are insta death if pushed too far. Get a pot and dice, it will be cheaper than a new cpu me thinks.

 

[Mandrake4565]

I have to ask what CPU/NB voltage you guys run when you have your CPU that high....

1.3

closed loop or custom H20

Go full custom, I don't think you'll be happy with the temps from a AIO unit. My whole W/C system I picked up in pieces in the classies and ebay for less then $200.00

 

[bmwbaxter]

Updated! PolRoger takes second place!

Leaderboard:

Division|Name|CPU|Cooling|Score
Intel|MetalRacer|3930k|SS|16.15
Intel|ChanceCoats123|3770K|Air|9.06
AMD|Mandrake|FX-8350|H2O|9.22
Intel|Badbonji|3770K|Water|9.00
AMD|OCMusicJunkie|FX8350|Air|8.68
Intel|Robert17|3770K|AIO|9.00
Intel|Earthdog|3570K|AIO|6.83
AMD|trailertrash13|FX-8350|water|9.28
Intel|Bobnova|2600K|Air|9.04
Intel|Dark_n_Beyond|3770K|Water|10.58
Intel|Dejo|3770k|SS|10.68
Intel|Luis_GT|3770K|Water|10.66
Intel|Keny|3570K|Air|7.65
Intel|Whiskey11|3770k|Water|10.17
Intel|Mindrot|i7 970|water|9.52
Intel|PolRoger|2600K|Water|10.81
AMD|synthetic_fenix|FX-8350|H20|8.03

 

[OCMusicJunkie]

^^ That makes sense now... if you're only at 1.3v CPU/NB, it explains how I'm able to get anywhere near your clocks at under 1.5v CPU. When I'm only running the thing for as long as a bench or two, I'll push the CPU/NB up a good ways past that...

I'm really tempted to go custom. I just have this ADD thing about not reading instructions, so hopefully it would be something that can be figured out and built based on appearance alone. (No joke, I just eyed up the first brake chance I ever did on my car then drove it to test them out...)

 

[Mandrake4565]

If you're only going to cool the 8350 the 360 I have is overkill in most cases I could probably have gotten away with a 240 but it came with the Temjin when I bought it used. Do some research on the cpu blocks they do make a difference even if it 1-2c. If I were to do it over again I'd go with 1/8" thick tubing not 1/16" it kinks too easily. Get a decent pump, barbs/compression fittings and reservoir and your good to go. If you're going to add a gpu or 2 then do some research. Check out the classies I think there are a bunch of people parting out W/C setups in it.

 

[OCMusicJunkie]

@MD- good info man, thanks. I'm looking at pieces for a custom setup right now. If I'm going to go through the giant PITA to get a Kraken into the top of my case, guess I might as well just go for the real deal.

@TT- I just quick put your numbers into a CPU overclock calc- you were drawing ~288 watts of power just for the CPU during that run

 

[bmwbaxter]

10 days left!!!

 

[jiccman1965]

Intel/jiccman1965/3960X/SS/14.33

 

[bmwbaxter]

jiccmann takes second place!

 

[ChanceCoats123]

Nice jiccman!

 

[PolRoger]

Intel/jiccman1965/3960X/SS/14.33

What was the cpu speed for that run?