- Joined
- Jan 24, 2002
- Location
- my computer chair
Hello!
I am trying to optimize my BIOS settings to get a higher 3DMark score, but i dont want to mess up anything. So i need yor help. I red the manual the came with the MOBO, but some BIOS settings are only brifly explained. I also wanted to red a bios FAQ that sony posted in one of his previous posts but the site seems to be down at the moment.
These are the settings that i would change!!
Fast command decode
i would set it from normal--->fast
Enchance chip preformace (more agressive north bridge settings)
i would set it from disabled--->enabled
force 4-way interlave??? Dont now anything about this setting would it bring more speed if i enable it??
enable dram 4k-page note
i would set it from disabled--->enabled
bank 0/1 dram timing SDRAM 8/10ns
bank 2/3 dram timing SDRAM 8/10ns
bank 4/5 dram timing SDRAM 8/10ns
i can change these settings to SDRAM 8/10ns-->normal-->medium-->fast-->turbo
dont know what to set??? is the normal setting faster than SDRAM 8/10ns
sdram cycle length (CAS timing)
i would set it from CAS3--->CAS2
system bios cachable
i would set it from disabled--->enabled
video RAM cachable disabled--->enabled
AGP aperture size (can any1 tell me more about this setting)
i would set it from 64--->128
AGP 4xmode
i would set it from disabled--->enabled
EDITED: thanx for helping
I am trying to optimize my BIOS settings to get a higher 3DMark score, but i dont want to mess up anything. So i need yor help. I red the manual the came with the MOBO, but some BIOS settings are only brifly explained. I also wanted to red a bios FAQ that sony posted in one of his previous posts but the site seems to be down at the moment.
These are the settings that i would change!!
Fast command decode
i would set it from normal--->fast
Enchance chip preformace (more agressive north bridge settings)
i would set it from disabled--->enabled
force 4-way interlave??? Dont now anything about this setting would it bring more speed if i enable it??
enable dram 4k-page note
i would set it from disabled--->enabled
bank 0/1 dram timing SDRAM 8/10ns
bank 2/3 dram timing SDRAM 8/10ns
bank 4/5 dram timing SDRAM 8/10ns
i can change these settings to SDRAM 8/10ns-->normal-->medium-->fast-->turbo
dont know what to set??? is the normal setting faster than SDRAM 8/10ns
sdram cycle length (CAS timing)
i would set it from CAS3--->CAS2
system bios cachable
i would set it from disabled--->enabled
video RAM cachable disabled--->enabled
AGP aperture size (can any1 tell me more about this setting)
i would set it from 64--->128
AGP 4xmode
i would set it from disabled--->enabled
EDITED: thanx for helping