- Joined
- Jun 12, 2003
- Location
- West Orange, NJ
OK I want to set up 2 RAID-0s with 2 drives each, and in addition have my 160GB storage drive and my DVD burner (all SATA).
So far I have one RAID running, the DVD drive works, and the system sees one of the other RAID-ready drives, but not its pair, and not the storage drive.
Here's my current plug setup:
160 - SATA_RAID1
120a - SATA1
320a - SATA3
DVD - SATA4
320b - EZ_RAID2
120b - EZ_RAID1
If I remember correctly, the SATA_RAID1 is the JMicron port that works in RAID with the eSATA port for an on-the-go RAID.
The SATA1/3/4 ports I think are on the intel controller, and I'm not sure exactly what's up with the EZ_RAID ones, since the intel one can pick up a drive from it (what my OS is running on right now.)
If anyone has suggestions or first-hand experience with setting up 2 RAIDs on this mobo I'd greatly appreciate any help... this is one of the few things I have left to get worked out!
So far I have one RAID running, the DVD drive works, and the system sees one of the other RAID-ready drives, but not its pair, and not the storage drive.
Here's my current plug setup:
160 - SATA_RAID1
120a - SATA1
320a - SATA3
DVD - SATA4
320b - EZ_RAID2
120b - EZ_RAID1
If I remember correctly, the SATA_RAID1 is the JMicron port that works in RAID with the eSATA port for an on-the-go RAID.
The SATA1/3/4 ports I think are on the intel controller, and I'm not sure exactly what's up with the EZ_RAID ones, since the intel one can pick up a drive from it (what my OS is running on right now.)
If anyone has suggestions or first-hand experience with setting up 2 RAIDs on this mobo I'd greatly appreciate any help... this is one of the few things I have left to get worked out!