• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Suggest water cooler for this build

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

barrywashington

New Member
Joined
Jun 13, 2018
Những lợi ích của than hoạt tính
Than hoạt tính là bột mịn, không mùi, màu đen thường được sử dụng trong các phòng cấp cứu để điều trị nhiễm độc quá liều. Nhờ đặc tính hấp thụ độc tố của nó mà nó có thể áp dụng vào một loạt các công dụng y học và mỹ phẩm khác nhau, nhưng đáng kể nhất đó chính là áp dụng vào ngành công nghệ lọc nước tân tiến hiện nay.
Than hoạt tính được tạo ra bằng cách làm nóng các nguồn carbon tự nhiên, chẳng hạn như gỗ. Bột hoạt tính màu đen ngăn chặn các độc tố khỏi bị hấp thụ trong dạ dày bằng cách liên kết với chúng. Cơ thể không thể hấp thụ than, và do đó các độc tố liên kết với than củi rời khỏi cơ thể trong phân.
Than hoạt tính là gì?
Than hoạt tính không phải là loại hợp chất được tìm thấy trong gạch than hoặc các mẩu thức ăn cháy. Việc sản xuất than hoạt tính làm cho nó trở nên có tính hấp phụ, cho phép nó liên kết với các phân tử, ion hoặc nguyên tử. Bằng cách này, nó có thể loại bỏ chúng khỏi các chất hòa tan.
Chính vì vậy mà than hoạt tính thường được sử dụng rất nhiều trong các loại máy lọc nước tổng gia đình
than-hoat-tinh-la-gi.jpg

Làm than hoạt tính liên quan đến việc làm nóng các vật liệu giàu carbon, chẳng hạn như gỗ, than bùn, vỏ dừa, hoặc mùn cưa lên đến một nhiệt độ rất cao.
Quá trình 'kích hoạt' này ngăn chặn than của các phân tử hấp thụ trước đó và giải phóng các vị trí liên kết một lần nữa. Quá trình này cũng làm giảm kích thước của lỗ siêu nhỏ trong than và tạo ra nhiều lỗ hơn trong mỗi phân tử, do đó, tăng diện tích bề mặt tổng thể của nó.
Cách sử dụng than hoạt tính hợp lý
Các nhà chức trách chỉ chấp thuận than hoạt tính để điều trị khẩn cấp quá liều hoặc ngộ độc.
Nhưng do đặc tính làm sạch độc tố mạnh mẽ của nó, một số người ủng hộ đã đề xuất than hoạt tính như một điều trị cho một danh sách ngày càng tăng của các điều kiện.
Chưa có nghiên cứu quy mô lớn, kết luận để xác định lợi ích của than hoạt tính. Nhiều sản phẩm không kê đơn (OTC) cũng dựa trên các nguyên tắc hóa học cơ bản của than hoạt tính để bảo vệ các yêu cầu về lợi ích của chúng.
Một số ít sử dụng than hoạt tính với một số bằng chứng bao gồm:
Tăng sức khỏe cho thận
Than hoạt tính có thể hỗ trợ chức năng thận bằng cách lọc ra các độc tố và thuốc không tiêu hóa.
Than hoạt tính tỏ ra đặc biệt hiệu quả trong việc loại bỏ độc tố có nguồn gốc từ urê, sản phẩm phụ chính của quá trình tiêu hóa protein.
Một số nghiên cứu trên động vật cho thấy than hoạt tính có thể giúp cải thiện chức năng thận và giảm tổn thương đường tiêu hóa và viêm ở những người mắc bệnh thận mãn tính.
Bảo vệ đường ruột
Bột than hoạt tính được cho là có khả năng phá vỡ khí đường ruột, mặc dù các nhà nghiên cứu vẫn không hiểu cách hoạt động của chúng là như thế nào.
Nước và khí bị mắc kẹt trong đường ruột có thể dễ dàng đi qua hàng triệu lỗ nhỏ trong than hoạt tính, và quá trình này có thể trung hòa chúng.
Nghiên cứu cho thấy rằng các giám định y khoa đã có thể nhìn thấy một số bộ phận nhất định của một số cơ quan mà họ dự định xác định bằng siêu âm trong khi khí đường ruột sẽ che khuất trước khi điều trị.
Ngoài ra, khoảng 34% những người tham gia được cho dùng than hoạt tính để giảm lượng khí của họ đã có những triệu chứng cải thiện.
Trong một nghiên cứu năm 2017 , những người dùng 45 mg simethicone và 140 mg than hoạt tính ba lần mỗi ngày trong 10 ngày, tất cả đều báo cáo giảm đáng kể đau bụng không có tác dụng phụ.
Nghiên cứu vẫn còn hạn chế, nhưng một ủy ban của Cơ quan An toàn Thực phẩm Châu Âu (EFSA) báo cáo rằng có đủ bằng chứng để hỗ trợ việc sử dụng than hoạt tính để giảm sự tích lũy khí quá mức.
Không có cách nào để sử dụng than hoạt tính cho khí đường ruột, nhưng EFSA khuyên bạn nên uống ít nhất 1 g vào 30 phút trước và sau mỗi bữa ăn.
Lọc nước
Mọi người từ lâu đã sử dụng than hoạt tính như một bộ lọc nước tự nhiên. Cũng giống như trong ruột và dạ dày, than hoạt tính có thể tương tác và hấp thụ một loạt các độc tố, ma túy, vi rút, vi khuẩn, nấm và hóa chất được tìm thấy trong nước.
Trong các thiết lập thương mại, chẳng hạn như các trung tâm quản lý chất thải, các nhà khai thác thường sử dụng hạt than hoạt tính cho một phần của quá trình lọc. Hàng chục sản phẩm lọc nước cũng được thiết kế để sử dụng tại nhà, sử dụng lõi lọc nước carbon để làm sạch nước độc tố và tạp chất.
Một nghiên cứu năm 2015 cho thấy rằng các hệ thống lọc nước sử dụng carbon loại bỏ 100% chất florua trong 32 mẫu nước chưa lọc sau 6 tháng lắp đặt.
Giảm triệu chứng tiêu chảy
Với việc sử dụng nó như là một chất hấp thụ đường tiêu hóa trong quá liều và ngộ độc, nó sau đó một số người có thể đề xuất than hoạt tính như một điều trị tiêu chảy .
Trong một đánh giá năm 2017 về các nghiên cứu gần đây về việc sử dụng than hoạt tính để tiêu chảy, các nhà nghiên cứu kết luận rằng nó có thể ngăn chặn vi khuẩn và các loại thuốc có thể gây ra tiêu chảy vào cơ thể bằng cách bẫy chúng trên bề mặt xốp, kết cấu của nó.
Trong khi lưu ý nó như là một điều trị thích hợp cho tiêu chảy, các nhà nghiên cứu cũng chỉ ra rằng than hoạt tính có ít tác dụng phụ, đặc biệt là so với các loại thuốc tiêu chảy thông thường.
Làm trắng răng và sức khỏe răng miệng
Hàng chục sản phẩm làm trắng răng chứa than hoạt tính.
lam-trang-rang-7.jpg
Nhiều sản phẩm sức khỏe răng miệng có chứa than hoạt tính yêu cầu có nhiều lợi ích khác nhau, chẳng hạn như:
- Kháng virus
- Kháng khuẩn
- Kháng nấm
- Giải độc
Các đặc tính hấp thụ độc tố của than hoạt tính có thể là quan trọng ở đây, nhưng không có nghiên cứu quan trọng để hỗ trợ việc sử dụng nó để làm trắng răng hoặc sức khỏe răng miệng.
Trong một đánh giá năm 2017, các nhà nghiên cứu kết luận rằng không có đủ dữ liệu lâm sàng hoặc lâm sàng để xác định độ an toàn hoặc hiệu quả của than hoạt tính để làm trắng răng hoặc sức khỏe răng miệng.
Chăm sóc da
Các nhà nghiên cứu đã báo cáo rằng than hoạt tính có thể giúp rút ra các vi hạt, chẳng hạn như bụi bẩn, bụi, hóa chất, chất độc và vi khuẩn, lên bề mặt da, để loại bỏ chúng dễ dàng hơn.
Khử mùi
Các chất khử mùi than hoạt tính được sử dụng rộng rãi. Than có thể hấp thụ mùi và khí độc hại, làm cho nó trở nên lý tưởng như một chất khử mùi nách, giày và tủ lạnh.
Than hoạt tính cũng được báo cáo để có thể hấp thụ độ ẩm dư thừa và kiểm soát mức độ ẩm ở mức vi mô.
Nhiễm trùng da
Trên thế giới, nhiều học viên y học cổ truyền khác nhau sử dụng bột than hoạt tính được làm từ vỏ dừa để điều trị các tình trạng mô mềm, chẳng hạn như nhiễm trùng da.
Than hoạt tính có thể có tác dụng kháng khuẩn bằng cách hấp thụ vi khuẩn có hại từ vết thương. Một số được bán sẵn bên ngoài thị trường để mọi người có thể dễ dàng mua và sử dụng.
Mọi thông tin về những lợi ích của than hoạt tính khác, các bạn có thể truy cập https://www.tripadvisor.com.vn/Profile/may-loc-nuoc để nhận được những thông tin bổ ích nhất cũng như những lời khuyên hữu ích nhất để bảo vệ sức khỏe của chính bạn và những người thân yêu trong gia đình bạn.
 
Last edited:
More info would be incredibly helpful. :)

Like, what are you overclocking to and at what voltage? What motherboard?
What cooler are you using currently and what temps are you reaching that is making you nervous?
What case are you using? Fan count...location... and airflow direction?

The CPU is good to well over 90C so if you are not hitting that point, then there isn't a worry in the first place.

If you want more FPS to play games on ultra, its the video card holding you back. YOu may get a couple FPS out of the CPU overclock (depending on the title, resolution and settings) but the lion's share of increases will come from the GPU... overclock that for 5-10% gains in FPS.
 
90c on a 7700k? ouch I had no clue modern CPUs could take that much. Or even GPUs for that matter.

More info OP? The case, we need to know what case you have.
If your new to water cooling Id go for a full kit like the ones XSPC sells. I'm not fan of kits as you can get better temps with a full custom setup. For a beginner your better off with a kit that has everything. There is a less chance of fugging something up with a kit.
 
I'm going to pull rank on that, even if it can run upto 100C before throttling that can't be good for such a flimsy thin chip.
 
Last edited:
I'd choose what Intel says over [anyone]. Obviously, the warmer it is, the worse it is, but, if its rated up there by Intel, I'm following what they say. ;)

It will run all day long at 100C.. the CPUs lower the voltage and clocks until its under there. Additionally, there is a thermal shut off point set even higher to prevent damage as well. Lower is always better, indeed, but, it's rated up there and common advice is to keep these things under 90C when stress testing.
 
Just because its not throttling dose not mean its good for the CPU. Throttling temps and shut off temps tend to be much higher then what is good for the chip.
And Intel is the one selling the CPUs, given all the crud they pulled lately I would not be amazed if they stated 100c as part of a planed obsolescence thing or to cover a flaw in the chip.

OP, don't let you CPU hit 100c or even 90c, that is just a bad idea. Keep in under 70-75c ish.
 
Last edited:
Just because its not throttling dose not mean its good for the CPU.
And Intel is the one selling the CPUs, given all the crud they pulled lately I would not be amazed if they stated 100c as part of a planed obsolescence thing.

OP, don't let you CPU hit 100c or even 90c, that is just a bad idea.
ouch I had no clue modern CPUs could take that much

If you don't know then maybe you shouldn't be doling out advice at random. Yes cooler is better but todays sislicon is a lot tougher. Mosfets can run even higher for extended periods it's in their design.
Now back to real life. When stress testing with a good piece of software like P95 temps in the low 90s are fine since typical use isn't going to push the system that hard very often but you know if it does you're not going to crash and burn either
 
Just because its not throttling dose not mean its good for the CPU. Throttling temps and shut off temps tend to be much higher then what is good for the chip.
And Intel is the one selling the CPUs, given all the crud they pulled lately I would not be amazed if they stated 100c as part of a planed obsolescence thing or to cover a flaw in the chip.

OP, don't let you CPU hit 100c or even 90c, that is just a bad idea. Keep in under 70-75c ish.
I never said it was good for the CPU. What I am saying is Intel says its OK. And Intel will WARRANTY the CPU at that value as well. I don't buy into the planned obsolesence thing or covering a flaw either. That's tinfoil hat stuff right there... :(

I don't suggest letting it hit 100C either, but if it does, it won't break the CPU as it has measures to throttle at that point. If it still gets hotter, the CPU automatically shuts off. 90C when stress testing is fine. Gaming and most other functions are nearly 20C less anyway...

The advice of keeping the CPU under 70-75C was from the Penryn days bud... with respect, you are swimming out of your lane here and its proper advice to say keep it under 90C when stress testing. :)
 
I'm not the one telling OP to run a CPU at a temp so high that is will die out early on in its life. And now your saying that its ok to run mosfets at temps higher then what their rated at? You do know what happens when you over heat/load a mosfets? The can blow up and catch fire. Do you really want to be liable for starting a fire? Someone could get hurt.

And as far as I know Intel has not made public anything on the safe temp range of the 7700k, just the temp at witch it starts to throttle at. And give all the controversy over the 7700k I have a hard time believing anything Intel says about the 7700k. It would be far smarter and safer at this point to fallow the industry stander of 65-70c

Bad hay, if you want OP to kill is hardware early on or blow up mosfets go right ahead give out your bad advice.


The advice of keeping the CPU under 70-75C was from the Penryn days bud... with respect, you are swimming out of your lane here and its proper advice to say keep it under 90C when stress testing. :)
Most new Intel CPUs still have temps ranges well below 100c, even 75c, my 6700t TJmax is 66c and most skylakes were in the mid 60s the 7700t at 80c well below 100c
Its not a Penryn days thing it seem the higher end kabby lake are all 100c, funny seeing that have problem with random temp spikes.

Even still throttling temps is higher then the safe temp range. Nvidia, amd, VIA and just about every other chip maker sets there throttling temps higher then the running temp range. its a industry standard. Intel use to do this with every cpu. As far as I know no safe temp range has been published for the kabylake cores.
 
Last edited:
I'm not the one telling OP to run a CPU at a temp so high that is will die out early on in its life. And now your saying that its ok to run mosfets at temps higher then what their rated at? You do know what happens when you over heat/load a mosfets? The can blow up and catch fire. Do you really want to be liable for starting a fire? Someone could get hurt.

And as far as I know Intel has not made public anything on the safe temp range of the 7700k, just the temp at witch it starts to throttle at. And give all the controversy over the 7700k I have a hard time believing anything Intel says about the 7700k. It would be far smarter and safer at this point to fallow the industry stander of 65-70c

Is english a second language for you? You obviously missed the point and would rather concoct some imaginary scenario where the sky is falling.
As for public disclosure about halfway down the page on Intels own site it say 100°C https://ark.intel.com/products/97129/Intel-Core-i7-7700K-Processor-8M-Cache-up-to-4_50-GHz
 
I'm not the one telling OP to run a CPU at a temp so high that is will die out early on in its life. And now your saying that its ok to run mosfets at temps higher then what their rated at? You do know what happens when you over heat/load a mosfets? The can blow up and catch fire. Do you really want to be liable for starting a fire? Someone could get hurt.

And as far as I know Intel has not made public anything on the safe temp range of the 7700k, just the temp at witch it starts to throttle at. And give all the controversy over the 7700k I have a hard time believing anything Intel says about the 7700k. It would be far smarter and safer at this point to fallow the industry stander of 65-70c

Bad hay, if you want OP to kill is hardware early on or blow up mosfets go right ahead give out your bad advice.
we arent telling anyone to run it that way either... wth????

Nobody said to run the FETs past their rating. Please reread his post. He said they run higher. In other words, many can run as high or higher than CPUs. ;)

Controversy over the 7700k? Whaaaat??????? There were people bitching about the thermal paste, but that is all that I can remember. Temp spikes are because its left on auto. When overclocking voltage is not left up to the mobo/CPU to adjust VID by multiplier. Not to mention, that issue was blown out of proportion as well. Mountains and mole hills.

This is getting worse and worse... go to share knowledge and just get met with misinformed bologna.. :(




EDIT: You edited your post well after subsequent posts....

Most new Intel CPUs still have temps ranges well below 100c, even 75c, my 6700t TJmax is 66c and most skylakes were in the mid 60s the 7700t at 80c well below 100c
Its not a Penryn days thing it seem the higher end kabby lake are all 100c, funny seeing that have problem with random temp spikes.
Perhaps that was a blanket statement. But the reason why that is on your 6700t. For the record, the "T" is a mobile processor and lower TDP. Also, the 66C you mentioned is TCase, not TJMax. There is a significant difference there vs TJunction/TJMax. 7700t is 80C... again a 35W processor and different than the higher TDP and overclocked chips. We are not comparing grocery getters to race cars. :)
6700t - https://ark.intel.com/products/88200/Intel-Core-i7-6700T-Processor-8M-Cache-up-to-3_60-GHz
7700k - https://ark.intel.com/products/97129/Intel-Core-i7-7700K-Processor-8M-Cache-up-to-4_50-GHz
7700t - https://ark.intel.com/products/97122/Intel-Core-i7-7700T-Processor-8M-Cache-up-to-3_80-GHz

Even still throttling temps is higher then the safe temp range. Nvidia, amd, VIA and just about every other chip maker sets there throttling temps higher then the running temp range. its a industry standard. Intel use to do this with every cpu. As far as I know no safe temp range has been published for the kabylake cores.
You can speculate and use antiquated/not applicable knowledge to form an opinion, that is your choice. Again there are TWO fail safes... TJmax/Throttling, and a shut down point. If 10C BELOW the throttling point isn't safe, then they would make the throttling point lower. Why would Intel have that ABOVE a safe temperature??? So they can RMA more parts and destroy their bottom line? Your logic just does not make sense here to me Bill, sorry.

The only 'bad' advice is limiting a 7700K to the 70s temperature wise... so much meat left on the bone for no reason.




Ok, that cleared up........ let's help the OP out when he returns. Sorry about that barry. :)
 
Last edited:
Bill know's better then everyone here. He's built 500+ liquid cooled systems or so he has said.

Anyways, OP, Ed has given you tons of great information. With that said, gives us a bit more info as already stated to help assist you.
 
The CPU is good to well over 90C so if you are not hitting that point, then there isn't a worry in the first place.

Intel was referring to a stock clocked CPU not overclocked, here's what Intel had to say.

In our internal investigation, we did not observe temperature variation outside of the expected behavior and recommended specifications. For processor specifications, please refer to the Intel® Core™ i7-7700K Processor Product Specifications ... We do not recommend running outside the processor specifications, such as by exceeding processor frequency or voltage specifications, or removing of the integrated heat spreader (sometimes called "de-lidding"). These actions will void the processor warranty.

This was in answer to 30c temperature spikes when programs were opened running the 7700K, you might want to read up on it.

https://www.gizmodo.com.au/2017/05/intel-dismisses-concerns-over-core-i7-7700k-temperature-problems/

https://www.extremetech.com/computi...g-issue-cluelessly-suggests-stop-overclocking

If the OP just wants a cooler for the stock 7700K then no problem because he did not actually clarify what he was overclocking, but I do not recommend saying 90c is a no worry situation.

http://www.tomshardware.com/forum/id-1800828/intel-temperature-guide.html

I would like to read up on where Intel has posted the 90c is OK if you don't mind supplying a link to that information?

The only 'bad' advice is limiting a 7700K to the 70s temperature wise... so much meat left on the bone for no reason.

The higher you allow the CPUs cruising temperature, the higher the temperature spike will reach when a sudden load demand is opened up. When the temperature spikes, depending on just how fast this temperature rise is happening, the CPU will internally protect itself using various measures to keep the temperature down.

Now when you say so much meat left on the bone for no reason that's not exactly true.

CPU temperature spikes causing the CPU to internally throttle begins to degrade the CPUs output performance.

This most evident result of that shows in benchmark performance, when high CPU temperatures yield lower benchmark results.

I'm currently using Core i7 7700k, overclock half of the time to play ultra settings. GTX 1060. and 16 GB ram. I feel like the heat it released is probably too much sometimes. So what is a good water cooler for this one. Any suggestion is appreciated.

Barry, Just what are you overclocking, and what do you want the cooler for?
 
Last edited by a moderator:
The higher you allow the CPUs cruising temperature, the higher the temperature spike will reach when a sudden load demand is opened up. When the temperature spikes depending on just how fast this temperature rise is happening, the CPU will internally protect itself using various measures to keep the temperature down.

Now when you say so much meat left on the bone for no reason that's not exactly true.

CPU temperature spikes causing the CPU to internally throttle begins to degrade the CPUs output performance.

This most evident result of that shows in benchmark performance, when high CPU temperatures yield lower benchmark results.
99% of people arent running avx loads like many of these stress tests run. As mentioned earlier, the vast majorty of loads on a pc, including gaming, are over 20c lower and sit in the 70s. So the spikes are only peaking at 90c (what we say to stop at while stress testing), well under the throttling point. In other words, running occt and seeing spikes to 94c means im too hot... lower until peaks hit 90c or less. Everything else is 20c+ lower depending on stress test and load type.

I can bench and get the same scores at 90c that i get at 70c. There doesnt seem to be any internal throttling there.

So yes, running a stress test to 70C or w/e he was saying leaves a lot left on the bone when we are talking a 90c stress testing limit. If max temps are over 90c, lower the overclock. Its that simple. But i fully expect an intel cpu to last its warranted life at 90c, even at 1.3V. Overclockers have pushed limits on daily drivers with mkre success than failure (though naturally, failure rates would increase , there isnt zero risk for overclocking and raising voltage)

As far as 90c being ok. Intel warranties that chip for X years running at that point or less. If its limit was less, it would be listed as less. So, its inferred its ok by intel by how their limits are set.

Ive read up in all that stuff. Good info for the thread. :)
 
Last edited:
Back