System Build TJ07 Specs and ? WATERCOOLING

[Vibe21]

This is my system right now:

1 x Corsair Special Edition White Graphite Series 600T Steel / Plastic ATX Mid Tower Computer Case

1 x ASRock Z68 Extreme3 Gen3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

1 x EVGA 012-P3-1570-AR GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video ...

1 x COOLER MASTER Silent Pro Gold Series RS800-80GAD3-US 800W ATX 12V v2.3 / EPS 12V v2.92 SLI Ready CrossFire Ready ...

1 x Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics ...

1 x OCZ Agility 3 AGT3-25SAT3-120G 2.5" 120GB SATA III MLC Internal Solid
State Drive (SSD)

1 x CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML8GX3M2A1600C9B

1 x ZALMAN CNPS9700 LED 110mm 2 Ball CPU Cooler

1 x Seagate Barracuda ST500DM002 500GB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive


My Cpu is overclocked to 4.5ghz at 1.30v i plan to go to 4.8

MY TEMPS right know prime 95 are max 78c and the hottest core running for 30 min


I plan on moving all this into a TJ07 with This Water cooling Hardware

*** HOT *** Koolance CPU-380I Water Block (Intel Processor)
- Nozzles Add Nozzle Pair, G1/4 Compression [13mm, 1/2"] NZL-V13


$84.95

Swiftech MCRES-MICRO™ Rev. 2 Reservoir


$24.95

*** NEW *** PrimoFlex Pro LRT UV Green Tubing -1/2in. ID X 3/4in. OD


$13.50

Scythe KAZE-Q 12 Channel Fan Controller - Silver


$28.95

IandH Silver KillCoils - Antimicrobial .999 Fine Silver Tubing / Reservoir Strip


$6.99

EK-PSC Fitting 13mm - G1/4 - Black


$13.98

Swiftech MCP655-B Special Edition 12 VDC Pump Without Speed Controller
- Fitting Size Bitspower 1/2" ID 3/4" OD Compression Fittings
- Cable No changes (stock, unsleeved)
- Sleeve Color Black
- Heatshrink Color UV Green


$94.95

*** SPECIAL *** BitFenix Essentials Pro Pack - ATX 24pin, EPS 8pin, 2x PCI-E 6pin Cable Set - Green


$29.95

Arctic Clean - Thermal Material Remover and Surface Purifier - 60ml


$5.95

Tuniq TX-4 Highest Performance Thermal Compound


$9.99

Alphacool NexXxoS UT60 Full Copper 480mm


$119.99

SilverStone (SST-AP121) 120 mm Air Penetrator fan - transparent blue UV blades
- Sleeve Color Neon UV Green
- Heatshrink Color UV Green


$67.96

GELID Solutions Wing 12 - 120mm UV Green Gamer Fan w/ Nanoflux Bearings - Sleeved
- Sleeve Color Neon UV Green
- Heatshrink Color UV Green


$37.98

*** NEW *** GELID Solutions Wing 9 - 92mm UV Green Gamer Fan w/ Nanoflux Bearings - Sleeved
- Sleeve Color Neon UV Green
- Heatshrink Color UV Green


$33.98

*** NEW *** Evercool HDB-250 2.5inch HDD to 3.5inch Bay Metal Mounting Bracket


$9.90

FilterRight™ 92mm Aluminum Fan Filter - UV Green


$10.98

Sub-Total: $594.95

I Got the Idea From Linus At NCIX
How do you guys think it will look and anything you would change.

I want your opinions. In the future i will be watercooling 1 or 2 high end gtx 680 or 1 690 thats y i am going with a 4x 120 rad

 

[Conumdrum]

This is my system right now:

1 x Corsair Special Edition White Graphite Series 600T Steel / Plastic ATX Mid Tower Computer Case

1 x ASRock Z68 Extreme3 Gen3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

1 x EVGA 012-P3-1570-AR GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video ...

Kinda outdated, a 660 is prolly a better choice

1 x COOLER MASTER Silent Pro Gold Series RS800-80GAD3-US 800W ATX 12V v2.3 / EPS 12V v2.92 SLI Ready CrossFire Ready ...

1 x Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics ...

3570K is the chip for gamers and good

1 x OCZ Agility 3 AGT3-25SAT3-120G 2.5" 120GB SATA III MLC Internal Solid
State Drive (SSD)

1 x CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML8GX3M2A1600C9B

1 x ZALMAN CNPS9700 LED 110mm 2 Ball CPU Cooler

What is this?

1 x Seagate Barracuda ST500DM002 500GB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive


My Cpu is overclocked to 4.5ghz at 1.30v i plan to go to 4.8

MY TEMPS right know prime 95 are max 78c and the hottest core running for 30 min


I plan on moving all this into a TJ07 with This Water cooling Hardware

*** HOT *** Koolance CPU-380I Water Block (Intel Processor)
- Nozzles Add Nozzle Pair, G1/4 Compression [13mm, 1/2"] NZL-V13


$84.95

Swiftech MCRES-MICRO™ Rev. 2 Reservoir


$24.95

*** NEW *** PrimoFlex Pro LRT UV Green Tubing -1/2in. ID X 3/4in. OD


$13.50

Scythe KAZE-Q 12 Channel Fan Controller - Silver

12 channels? Out of stock on Newegg. A good 4-6 channel at 30 watts per channel is a better choice. 12 channels?


$28.95

IandH Silver KillCoils - Antimicrobial .999 Fine Silver Tubing / Reservoir Strip


$6.99

EK-PSC Fitting 13mm - G1/4 - Black


$13.98

Swiftech MCP655-B Special Edition 12 VDC Pump Without Speed Controller
- Fitting Size Bitspower 1/2" ID 3/4" OD Compression Fittings
- Cable No changes (stock, unsleeved)
- Sleeve Color Black
- Heatshrink Color UV Green

UV green is the custom wiring the sleeve it for.
The D5 non vario isn't a greta pump in comparison to a D5 vario or better vet a 355 or better yet the Swiftech 35x pump.


$94.95

*** SPECIAL *** BitFenix Essentials Pro Pack - ATX 24pin, EPS 8pin, 2x PCI-E 6pin Cable Set - Green

Okay, makes for a nice build.


$29.95

Arctic Clean - Thermal Material Remover and Surface Purifier - 60ml

I have used it for years, best I have found to clean, not really needed, but good stuff.


$5.95

Tuniq TX-4 Highest Performance Thermal Compound


$9.99

Alphacool NexXxoS UT60 Full Copper 480mm

Good rad, huge. Will it fit? You do the research?


$119.99

SilverStone (SST-AP121) 120 mm Air Penetrator fan - transparent blue UV blades
- Sleeve Color Neon UV Green
- Heatshrink Color UV Green

Dunno if these are good or bad at a glance.


$67.96

GELID Solutions Wing 12 - 120mm UV Green Gamer Fan w/ Nanoflux Bearings - Sleeved
- Sleeve Color Neon UV Green
- Heatshrink Color UV Green


$37.98

*** NEW *** GELID Solutions Wing 9 - 92mm UV Green Gamer Fan w/ Nanoflux Bearings - Sleeved
- Sleeve Color Neon UV Green
- Heatshrink Color UV Green


$33.98

*** NEW *** Evercool HDB-250 2.5inch HDD to 3.5inch Bay Metal Mounting Bracket


$9.90

FilterRight™ 92mm Aluminum Fan Filter - UV Green


$10.98

Sub-Total: $594.95

I Got the Idea From Linus At NCIX
How do you guys think it will look and anything you would change.

I want your opinions. In the future i will be watercooling 1 or 2 high end gtx 680 or 1 690 thats y i am going with a 4x 120 rad

Not a bad list. You forgot fittings/barbs, rotaries/clamps/compressions all your choice.

Not a bad start. Don't think you understand pump diffs and maybe fans, but not bad at all. Ohh liquid. Distilled water right?

 

[Vibe21]

I am getting this hardware off of http://www.performance-pcs.com/ they do all the wiring and sleeving for free on most items check them out and i got all the fittings with each component.
The rad will fit with no modifications if you mount it with velcro on the bottom
The components for the computer are already what i have. im not going to upgrade until i need to. probably a year away.
and as of all the fittings they come with the pump, block. because performance pc is amazing and the fans i didnt know weather the air penentrators or the gt 15s.

 

[Conumdrum]

Can't go wrong with the AP-15 1850 RPM fans for lower FPI rads. Great fans, changed WC fan choices about 2-3 years ago.

Performance PC's is great, you need to look at other stores. Performance PC's is in Florida and they carry everything... At higher costs. There are stores in the Midwest that are cheaper. Save some $$ look around, use Google, and we have sticky for WC stores too if you want to do research and save money.

The STICKIES and time and paitence are key. It's a HOBBY, what's the rush?

 

[Vibe21]

Did you mean GT-15s and i will look at some other stores thanks for the advice ill probably go with the GT-15 over the AP121

Also what stores do you recommend

 

[skorpien]

No, he meant AP-15s. D1225C12B5AP-15 is the full model number. It's a rather unfortunate acronym as the Air Penetrators (which came after) also go by AP###.

 

[Vibe21]

Okay thank you, that makes sense.

 

[Conumdrum]

What stores? I checked, the link for stores is still valid in the main WC sticky.

Take a look at them, depending where you are in the world.

Gets you into the stickies, that's my main goal.

 

[ivanlabrie]

AP121's are really good fans...high speed ones are beastly, not terribly loud but great for high density rads. (if a bit pricey)

 

[Vibe21]

Okay Conumdrum i finally found that sticky inside of the sticky. i was just being blind. thank you

 

[Conumdrum]

Yea, the sticky in the sticky in the sticky, so true. Takes a while to read them all for sure.