Could someone advise clocking E8500 E0 Wolfdale vid 1.25?
My CPU just wont work stabile with 4,32Ghz.
I tried it with fsb 480 @ 9x
vcore 1,425v
vtt:auto
pll:auto
NB:1,36v
SB:1,50v
my rig is:
MB: ASUS STRIKER II EXTREME bios 0901
processor: BX80570E8500 Intel E8500 E0
at the moment @ 3,8ghz @ 1,3825v
vtt:auto
pll:auto
mem: 1,6v
nb:1,34v
sb:1,50v
But i don't actually now... is it good like that.
All i know is that the board needs a mild overclock eaven to work stabile at all.
http://processorfinder.intel.com/details.aspx?sSpec=SLB9K#
Cooled by Zalman CNPS 9700
ram: Corsair DDR3 2GB PC1333 (2x 1GB) TWIN3X2048-1333C9DHX 9-9-9-24 T2 1,6v
graphics: XFX GTX 280 GX-280N-ZDF9 (stock cooler OCd with riva tuner 665/1452/1200mhz)
PSU: CHIEFTEC PSU ATX 850W PFC,80+,CABL,MANAG CFT-850-14C
HDD: SEA BARRACUDA 7200,11 500GB SATA2 32MB ST3500320AS
DVD: Samsung DL
Case: Antec Twelve Hundred
Memory cooler: Corsair Dominator Airflow Cooling Fan
LCD:Samsung 2032BW
Can someone show me the right way`? - what digits should I input manually and what would be better off on ´auto´ setting.
My stable settings are:
AI Overclock : manual
FSB 1600
MEM 1333
CPU: 1,325v
vtt:auto (Everest shows 1,22)
pll:auto (Everest 1,54)
MEM: 1,6v
nb:1,34v
sb:1,5v
other voltages untouched - "default -auto"
From my cpu i expect to get 4,2Ghz at least - but when somebody has experience with the zalman cooler and says i can do more , then that would be wery happy news for me
HWMonitor shows IDLE 40c and load is about 57C max
From my Corsair memory i want to see better performance too - but i dont know what magic numbers to use to get that performance.
I tryed 7-7-7-19 T1 @ 1033mhz but i don't have all the Advanced Memory digits.
So far i'v read in forums that i need voltages for vtt,pll,vcore, northbridge, GTL lanes 0,1,2,3 , GTL Northbridge and memory voltage fo the new settings And advanced timing settings.
My CPU just wont work stabile with 4,32Ghz.
I tried it with fsb 480 @ 9x
vcore 1,425v
vtt:auto
pll:auto
NB:1,36v
SB:1,50v
my rig is:
MB: ASUS STRIKER II EXTREME bios 0901
processor: BX80570E8500 Intel E8500 E0
at the moment @ 3,8ghz @ 1,3825v
vtt:auto
pll:auto
mem: 1,6v
nb:1,34v
sb:1,50v
But i don't actually now... is it good like that.
All i know is that the board needs a mild overclock eaven to work stabile at all.
http://processorfinder.intel.com/details.aspx?sSpec=SLB9K#
Cooled by Zalman CNPS 9700
ram: Corsair DDR3 2GB PC1333 (2x 1GB) TWIN3X2048-1333C9DHX 9-9-9-24 T2 1,6v
graphics: XFX GTX 280 GX-280N-ZDF9 (stock cooler OCd with riva tuner 665/1452/1200mhz)
PSU: CHIEFTEC PSU ATX 850W PFC,80+,CABL,MANAG CFT-850-14C
HDD: SEA BARRACUDA 7200,11 500GB SATA2 32MB ST3500320AS
DVD: Samsung DL
Case: Antec Twelve Hundred
Memory cooler: Corsair Dominator Airflow Cooling Fan
LCD:Samsung 2032BW
Can someone show me the right way`? - what digits should I input manually and what would be better off on ´auto´ setting.
My stable settings are:
AI Overclock : manual
FSB 1600
MEM 1333
CPU: 1,325v
vtt:auto (Everest shows 1,22)
pll:auto (Everest 1,54)
MEM: 1,6v
nb:1,34v
sb:1,5v
other voltages untouched - "default -auto"
From my cpu i expect to get 4,2Ghz at least - but when somebody has experience with the zalman cooler and says i can do more , then that would be wery happy news for me
HWMonitor shows IDLE 40c and load is about 57C max
From my Corsair memory i want to see better performance too - but i dont know what magic numbers to use to get that performance.
I tryed 7-7-7-19 T1 @ 1033mhz but i don't have all the Advanced Memory digits.
So far i'v read in forums that i need voltages for vtt,pll,vcore, northbridge, GTL lanes 0,1,2,3 , GTL Northbridge and memory voltage fo the new settings And advanced timing settings.
Last edited: