- Joined
- Oct 6, 2002
- Location
- W. Lafayette, IN
Well, for the past year I've been running Dual PSU,
Antec 450 TruPower
Generic 300 Watter
My case has 2 power supply slots as seen here:
http://www.ocforums.com/attachment.php?attachmentid=35520&stc=1
Typical I run the Motherboard/Video Card on the Main
3 x 120mm fans, 2x 80 mm fans, 2 HD, 1 CDR on the 300 Watt
It was done to isolate the noise of the fans from the main signal.
Is there any reason to run dual now that I have the 520? It's not a big pain to wire up, but I mainly don't want to butcher the 520.
Thanks
Indyxc
Antec 450 TruPower
Generic 300 Watter
My case has 2 power supply slots as seen here:
http://www.ocforums.com/attachment.php?attachmentid=35520&stc=1
Typical I run the Motherboard/Video Card on the Main
3 x 120mm fans, 2x 80 mm fans, 2 HD, 1 CDR on the 300 Watt
It was done to isolate the noise of the fans from the main signal.
Is there any reason to run dual now that I have the 520? It's not a big pain to wire up, but I mainly don't want to butcher the 520.
Thanks
Indyxc