originally posted by imog
Insulating your rig is really not a very large obstacle. Plan to insulate during a time when you have no other plans and will not be rushed for any reason, and getting it right will be easy.
Supplies:
You need neoprene, dielectric grease. and silicon.
Procedure: fill part of the inside of the socket with dielectric grease. insert a pad of neoprene on top of that to fill most of the area, top off inside socket with dielectric grease. cover back of die area on chip with dielectric grease. insulate the pins with dielectric grease (in holes of socket). cut neoprene to fit pretty snugly around socket. use silicone to adhere it to mobo. fill any gaps between neoprene and socket/mobo with dielectric grease, leave no air. put waterblock on and do the same around that as you did with the socket, leaving no air inside neoprene. leave no pathway, no matter how small, for air to travel from the case to inside the neoprene. take dielectric grease and cover the back of the mobo corresponding to the socket. take a pad of neoprene and adhere it to the mobo over the dielectric grease. leave no gaps for air. be VERY liberal with dielectric grease through the whole process. You shouldn't have any problems if you take your time. that's it.