- Joined
- Nov 12, 2002
- Location
- BAY AREA # 1 GIANTS FAN
If you run a Vantec Tornado with a (Controller/Rheobus/Volt Mod) at 7V is this about what air flow/ noise/fan speed would be?
Voltage@12v
Fan Speed=5700RPM
Air Flow=84.1CFM
Noise=55.2dB(A)
Now if running@ 7V
Voltage@7V
Fan Speed=3300RPM
Air Flow=49cfm
Noise= 32.6 dB(A)
Does anyone know if this sounds about right?
I just did some math dividing and multiplying to get those figures but I have know idea if it can be applied to this ...
Anyone with a controller using a Tornado should be able to verify if that RPM speed is correct at @7V...If the RPM speed is right then maybe the others are similiar:
If this is correct then I would have hard time finding a 80mm fan that would give the same figures @ 12V as the Tornado @7V :
The Tornado would be a great choice if @7V it was (RPM3300/49CFM/Noise/32.6)
If these numbers are correct hell I would run 4 or 5 Tornados on a Contoller @7V if some one can give me a idea that this sounds right:
Any thoughts, ideas, suggestions, or comments if this is not right would be appreciated:
Thanks:Snowus
Voltage@12v
Fan Speed=5700RPM
Air Flow=84.1CFM
Noise=55.2dB(A)
Now if running@ 7V
Voltage@7V
Fan Speed=3300RPM
Air Flow=49cfm
Noise= 32.6 dB(A)
Does anyone know if this sounds about right?
I just did some math dividing and multiplying to get those figures but I have know idea if it can be applied to this ...
Anyone with a controller using a Tornado should be able to verify if that RPM speed is correct at @7V...If the RPM speed is right then maybe the others are similiar:
If this is correct then I would have hard time finding a 80mm fan that would give the same figures @ 12V as the Tornado @7V :
The Tornado would be a great choice if @7V it was (RPM3300/49CFM/Noise/32.6)
If these numbers are correct hell I would run 4 or 5 Tornados on a Contoller @7V if some one can give me a idea that this sounds right:
Any thoughts, ideas, suggestions, or comments if this is not right would be appreciated:
Thanks:Snowus
Last edited: