Temp Issues

[aboroth]

OK i just installed a danger den tdx, blackice pro, and a ehiem 1250. My temps are 48* idle and 54* load. Now before this i had a hyper 48 and my temps were 56* idle and 64* load(that was at 11x204), now i have to believe that my temps are reading incorrect, i have a temp probe coming in the mail to check them but i wanted to see what you guys thought. Thanks in advance.

[lowfat]

Do you have good airflow around the CPU? having air stand around the cpu, usually makes the CPU temp sensor read quite a bit high.

[crash013]

Those temps are a little too high. I think those temps are incorrect too. Sometimes the temps can be read incorrectly if there is no airflow.

[aboroth]

There is plenty of airflow, right now i have the side of the case off and have a 120mm and 80mm fan blowing in the case. i also have another 120mm intake fan.

[Slammin]

http://www.ocforums.com/showthread.php?t=395997

Same issue here. :bang head

[aboroth]

Cool, good to know someone else is having the same problem, guess i'll have to wait till my temp probe gets here.

[Slammin]

Umm, thanks?

Lol! Anyway, have some comfort knowing that I can overclock my cpu higher, and with less voltage than I could when I was using my SP-94, so this would aappear to be a temp reporting issue, at least in my case, but it sure is weird that my gpu and cpu report the exact same idle and max temps!