So I got a few of these to measure temps around the case. I have an RBX 775 water block for my CPU (E6700) and am wondering... can i just put the probe between the cpu and block making sure its doused with thermal paste or will that hurt something?
So I got a few of these to measure temps around the case. I have an RBX 775 water block for my CPU (E6700) and am wondering... can i just put the probe between the cpu and block making sure its doused with thermal paste or will that hurt something?
Never put anything between your cpu and its heatsink but thermal paste. Even a very thin thermocouple will cause terrable contact and bad temperatures.
You can tape/superglue the probe to the SIDE of the core/heatspreader, just be very sure it doesn't keep the heatsink from making proper contact on the cpu.
Don't you have Probe II. i know my asus a8n sli deluxe came with it. That tells you the cpu temp mb temp v core and so on, Check on the asus disk. also use speedfan. http://www.almico.com/speedfan431.exe both are pretty accurate.
I have the same probes in my system to take temps for CPU, GPU, and Ram.
For the CPU I used AS Alumina(sp?) adhesive to stick it to the side of the integrated heat spreader and it works like a charm. I did the same for the GPU, and for the Ram I just stuck the probe in the heat spreader and hoped I made good contact.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.