- Joined
- Sep 15, 2007
- Location
- Small town Emlenton, PA
Hiyas you experts. I'm ready to make the plunge to water, and here is my list. If you could take the time, anything wrong or missing? A few questions at the bottom also.
Rad: PA 120.3 $135 DD
Rad fittings: EK High Flow (G3/8 thread, ½” OD) $6 Pet
Rad Shroud: PA 120.3 shroud $19 DD
Rad Gasket: $6 DD
Pump: Laing D5 MCP655 Vario $88 Pet
Res: EK-Multioption RES 150 rev.2 $42 Jab
EK Anti Cyclone: $2.50 Jab
Tubing: Tygon Silver 1/2x3/4 10’ $35 Pet
Tubing coils: Swiftech Smartcoils 625(2) $6 Pet
T fitting for drain: Delrin T $8 DD
Drain port: Delrin Fillport $12 DD
Clamps: Stainless worm drive w/liner (15) $19 Pet
Biocide: PT-Nuke $3 Pet
Antifreeze: Local Toyota Red $xx
Blocks:
DTek FuZion CPU $62 Pet
Dtek FuZion Intel 775 Pro-Mount set $12 Jab
IONE for NVIDIA G92 GT and GTS $110 DD
NB block: Swiftech MCW30 Chipset block $28 Pet
OR
NB Block: MPC-Universal Chipset Block (brass) $45 DD
Store code:
DD is Danger Den
Pet is Petras
Jab is Jab-Tech
My stuff:
Mobo Abit AW9D-Max
GPU EVGA 8800GT 512 (92nm)
1: Will The GPU HS fit a 8800GT 92nm?
2: Will the NB blocks fit my Abit AW9D-Max?
3: I ordered the right rad fittings for a PA 120.3 for ½” ID tubing?
4: The pump, Res, and blocks all come with ½” OD fittings IF I order the right fittings?
Not too worried about saving a few bucks here and there, just worried that the selection of stuff is right.
Rad: PA 120.3 $135 DD
Rad fittings: EK High Flow (G3/8 thread, ½” OD) $6 Pet
Rad Shroud: PA 120.3 shroud $19 DD
Rad Gasket: $6 DD
Pump: Laing D5 MCP655 Vario $88 Pet
Res: EK-Multioption RES 150 rev.2 $42 Jab
EK Anti Cyclone: $2.50 Jab
Tubing: Tygon Silver 1/2x3/4 10’ $35 Pet
Tubing coils: Swiftech Smartcoils 625(2) $6 Pet
T fitting for drain: Delrin T $8 DD
Drain port: Delrin Fillport $12 DD
Clamps: Stainless worm drive w/liner (15) $19 Pet
Biocide: PT-Nuke $3 Pet
Antifreeze: Local Toyota Red $xx
Blocks:
DTek FuZion CPU $62 Pet
Dtek FuZion Intel 775 Pro-Mount set $12 Jab
IONE for NVIDIA G92 GT and GTS $110 DD
NB block: Swiftech MCW30 Chipset block $28 Pet
OR
NB Block: MPC-Universal Chipset Block (brass) $45 DD
Store code:
DD is Danger Den
Pet is Petras
Jab is Jab-Tech
My stuff:
Mobo Abit AW9D-Max
GPU EVGA 8800GT 512 (92nm)
1: Will The GPU HS fit a 8800GT 92nm?
2: Will the NB blocks fit my Abit AW9D-Max?
3: I ordered the right rad fittings for a PA 120.3 for ½” ID tubing?
4: The pump, Res, and blocks all come with ½” OD fittings IF I order the right fittings?
Not too worried about saving a few bucks here and there, just worried that the selection of stuff is right.