I posted this in the CPU forum section, but I think it may be a mobo issue. So im sorry if the double post is illegal, if so just lock/delete it. I need some help though :|
So i just put together a budget(ish) rig, and my first attempt at overclocking.
She starts up/runs fine @ 3.8, manual vcore (not lowest setting) ~1.31
190clock --> 20x mult
Disabled C1E, SpeedStep (EIST), and C2/C3..
Under Prime95 small fft full load, my multiplier is alternating from 19x to 20x (set manually to 20x). I'm fairly sure I've disabled all the settings for power saving and throttling. My temps are ~57 under load, so i don't think its a temp throttle.
Any insight? (I did try to search, but most threads were solved w/ disabling EIST + C1E)
System:
i5 750 @ 3.8
ASUS P7P55D mobo + latest BIOS (rev 1600 or something)
Ripjaw 1600 4GB (2x2gb sticks) at 7-8-7-24 + auto rest
Sapphire 5770 Vapor X
Antec 900
OCZ 600W PSU
So i just put together a budget(ish) rig, and my first attempt at overclocking.
She starts up/runs fine @ 3.8, manual vcore (not lowest setting) ~1.31
190clock --> 20x mult
Disabled C1E, SpeedStep (EIST), and C2/C3..
Under Prime95 small fft full load, my multiplier is alternating from 19x to 20x (set manually to 20x). I'm fairly sure I've disabled all the settings for power saving and throttling. My temps are ~57 under load, so i don't think its a temp throttle.
Any insight? (I did try to search, but most threads were solved w/ disabling EIST + C1E)
System:
i5 750 @ 3.8
ASUS P7P55D mobo + latest BIOS (rev 1600 or something)
Ripjaw 1600 4GB (2x2gb sticks) at 7-8-7-24 + auto rest
Sapphire 5770 Vapor X
Antec 900
OCZ 600W PSU
Last edited: