- Joined
- Mar 2, 2012
Alright so I am trying to OC to 3ghz and my settings are
FSB (QDR), Mhz: 1333
MEM (DDR), Mhz 1066
Voltages
CPU core: 1.3
CPU FSB: 1.2
Memory: 2.1
nForce SPP: 1.3
NF200 Voltage Level:
My computer specs are:
Antec 750w PSU
Mobo 750i sli ftw
Q6600 2.4 Ghz
DDR2 RAM OCZ PC2 8500 1066Mhz
So my computer randomly goes to a black screen and monitor disconnects and when I hit the restart button on my case it doesn't boot up and I have to turn the computer off completely and then start it again for the computer to boot normally. Also with these current settings my RAM throws error codes on memtest86 but when I put everything to stock to the CPU the RAM error codes stop so I know it has to do something with the overclock.
Am I adding too much or too little voltage?
FSB (QDR), Mhz: 1333
MEM (DDR), Mhz 1066
Voltages
CPU core: 1.3
CPU FSB: 1.2
Memory: 2.1
nForce SPP: 1.3
NF200 Voltage Level:
My computer specs are:
Antec 750w PSU
Mobo 750i sli ftw
Q6600 2.4 Ghz
DDR2 RAM OCZ PC2 8500 1066Mhz
So my computer randomly goes to a black screen and monitor disconnects and when I hit the restart button on my case it doesn't boot up and I have to turn the computer off completely and then start it again for the computer to boot normally. Also with these current settings my RAM throws error codes on memtest86 but when I put everything to stock to the CPU the RAM error codes stop so I know it has to do something with the overclock.
Am I adding too much or too little voltage?