I finished my new dualie using an ASUS NCCH-DL (bios NCCDL03) with Xeon 3.0 Noconas (800MHz fsb, 1MB L2 cache). On post it recognizes 2 processors as Xeon 3.0 but after ide boot, it gives this warning message:
Warning: non-matching MP Processor
multiprocessing capable processors have been detected in your system. However, both processors must be the same model and frequency to run in multi-processing mode. Your system will continue to boot in uni-processor mode.
If one cpu is a SL7DW stepping D0 and the other is a SL7TC stepping E0 would they be seen as identical by the motherboard/bios? I probably solved my own problem here and need to rma the D0 for another E0.
Warning: non-matching MP Processor
multiprocessing capable processors have been detected in your system. However, both processors must be the same model and frequency to run in multi-processing mode. Your system will continue to boot in uni-processor mode.
If one cpu is a SL7DW stepping D0 and the other is a SL7TC stepping E0 would they be seen as identical by the motherboard/bios? I probably solved my own problem here and need to rma the D0 for another E0.