Hi everyone! i'm new in the forum! i realy like this forum...
My ring is:
I3 530 2.93 1156
Gigabyte P55A-UD4P F-14
4GB (2x2) Corsiar Dominator 1600mhz 9-9-9-24
Zotac GTS 250
Corsiar AX750
Scythe mugen 2 reb.B
the pc is one year old and the psu is new, one week (is have 2 connection for ATX/EPS anyone knows which i need to use, the connections to the psu are different one is 6 pin and another 8 pin?????)
i already overclock this pc, to:
CPU 3600
MUL 20
BLK 180
QPI 3960
Vcore 1.200 (bios)
Memory Speed 1800
Temps:
Max load: CPU 47c, 44c
Chipset: 43c
another temp just stay in 25c
Like this is realy a rock stable
now my problem is when i tray to raise the cpu clock to 4.0 or more, i can't get it stable i traied also puting down the memory and the qpi, raising the Vcore to 1.35, QPI/VTT to 1.35, and nothing help, i have problems with windows (blue screen) or problems with the bios, (just getting to default conf) yesterday i put new thermal grease both chipset and cpu.
I have another problem, always when i change MIT conf in bios, the pc shut down and then start again with the new conf, is this ok?
thank you for your answer and i'm sorry for my english, it's not my native lenguage...
My ring is:
I3 530 2.93 1156
Gigabyte P55A-UD4P F-14
4GB (2x2) Corsiar Dominator 1600mhz 9-9-9-24
Zotac GTS 250
Corsiar AX750
Scythe mugen 2 reb.B
the pc is one year old and the psu is new, one week (is have 2 connection for ATX/EPS anyone knows which i need to use, the connections to the psu are different one is 6 pin and another 8 pin?????)
i already overclock this pc, to:
CPU 3600
MUL 20
BLK 180
QPI 3960
Vcore 1.200 (bios)
Memory Speed 1800
Temps:
Max load: CPU 47c, 44c
Chipset: 43c
another temp just stay in 25c
Like this is realy a rock stable
now my problem is when i tray to raise the cpu clock to 4.0 or more, i can't get it stable i traied also puting down the memory and the qpi, raising the Vcore to 1.35, QPI/VTT to 1.35, and nothing help, i have problems with windows (blue screen) or problems with the bios, (just getting to default conf) yesterday i put new thermal grease both chipset and cpu.
I have another problem, always when i change MIT conf in bios, the pc shut down and then start again with the new conf, is this ok?
thank you for your answer and i'm sorry for my english, it's not my native lenguage...