- Joined
- Mar 25, 2002
- Location
- Oregon
1.None........... im may watercooler---- i use my well- and a pump- thats it!---
2. 8x in main
3. 2x in backup
2. 8x in main
3. 2x in backup
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
How many fans do you have in your case?
- Thread starter Ebola
- Start date
- Joined
- Aug 5, 2002
- Location
- Ottawa, ON
Heh heh
2 Antec LED 80mm fans intake in front
4 80mm rear exhaust
1 80mm PSU fan
1 120mm Panaflo blowhole on top
2 Crystal LED 80mm side intakes over PCI slots
1 TT Volcano 7+ on CPU
2 stock fans on Leadtek GeForce4 Ti 4600 GPU
1 chipset fan
-----------------------
14 total
temp: 1 degree above ambient at idle
35 degrees during 15 min. 100% load strain test
2 Antec LED 80mm fans intake in front
4 80mm rear exhaust
1 80mm PSU fan
1 120mm Panaflo blowhole on top
2 Crystal LED 80mm side intakes over PCI slots
1 TT Volcano 7+ on CPU
2 stock fans on Leadtek GeForce4 Ti 4600 GPU
1 chipset fan
-----------------------
14 total
temp: 1 degree above ambient at idle
35 degrees during 15 min. 100% load strain test
- Joined
- Jun 1, 2002
4x sunon 50cfm 80mm
1x sunon 108cfm 120mm
2x psu fans
2x power cooler 40cfm in a 5 1/4 bay
1xTt hardcano fan
1x sunon 108cfm 120mm
2x psu fans
2x power cooler 40cfm in a 5 1/4 bay
1xTt hardcano fan
- Joined
- Jun 30, 2002
- Location
- Boise, ID, USA
2x 80mm front intake
2x 80mm rear exaust
1x 92mm side intake
1x 92mm bottom intake
1x 80mm side output
2x 80mm PSU
1x 92mm CPU
1x 40mm chipset
11 fans, 876mm worth
2x 80mm rear exaust
1x 92mm side intake
1x 92mm bottom intake
1x 80mm side output
2x 80mm PSU
1x 92mm CPU
1x 40mm chipset
11 fans, 876mm worth
- Joined
- Mar 13, 2002
- Location
- Kamloops, BC, Canada
3
1 4500rpm mobo controlled intake running at 3900rpm mostly
1 4500rpm self regulated exhast, rins at 2500rpm mostly
1 psu fan no idea what rpm, it just runs.
the rest is watercooled
temps are in my sig
1 4500rpm mobo controlled intake running at 3900rpm mostly
1 4500rpm self regulated exhast, rins at 2500rpm mostly
1 psu fan no idea what rpm, it just runs.
the rest is watercooled
temps are in my sig
- Joined
- Jun 22, 2002
- Location
- Sterling IL
1 80MM exhaust
1 cheap chipset fan on my MX400 GPU
a Hard drive cooler (3 small silent fans blowing cool air across the hard drive)
the one in the PSU of course
last, the Dragon Orb 3 w/7000 RPM turbine fan (that's what it sounds like anyway)
i plan on adding a 80MM intake and a 60MM on the top of my case directly above the HSF and a 60MM in the side blowing onto the HSF.
so 7 total fans, 10 when i'm done with it.
1 cheap chipset fan on my MX400 GPU
a Hard drive cooler (3 small silent fans blowing cool air across the hard drive)
the one in the PSU of course
last, the Dragon Orb 3 w/7000 RPM turbine fan (that's what it sounds like anyway)
i plan on adding a 80MM intake and a 60MM on the top of my case directly above the HSF and a 60MM in the side blowing onto the HSF.
so 7 total fans, 10 when i'm done with it.
- Joined
- Jan 8, 2002
- Location
- !!!!!!!Canada!!!!!!
1 120 mm
8 80mm
1 92 mm
1 fan on my bue orb (don't know the size)
11 fans in all :O
I used to have 12 but the mobo doesn't need a fan on the chipset
8 80mm
1 92 mm
1 fan on my bue orb (don't know the size)
11 fans in all :O
I used to have 12 but the mobo doesn't need a fan on the chipset
- Joined
- May 1, 2002
- Location
- san jose, CA
15 fans total
- Joined
- Jul 21, 2002
- Location
- N.E Scotland
1 fan on northbridge
1 fan on heatsink
1 fan on gfx card
2 psu fans
7 case fans
------------------
12 fans in total
1 fan on heatsink
1 fan on gfx card
2 psu fans
7 case fans
------------------
12 fans in total
- Joined
- Jul 2, 2002
- Location
- Rotherham,UK
1x92mm panaflow on side of case blowing in
2x80mm exhausts on top
Twinfan PSU(1x80,1x92)
80mm in front of case
TT 80mm on HSF
1x60mm on HDD cooler
40mm on Northbridge, might get a bigger 'sink
2x80mm exhausts on top
Twinfan PSU(1x80,1x92)
80mm in front of case
TT 80mm on HSF
1x60mm on HDD cooler
40mm on Northbridge, might get a bigger 'sink
- Joined
- Aug 3, 2002
- Location
- Melbourne, Australia
1xNB
1xVGA RAM
1XHDD
1xIntake
1xExhaust
2xPSU
3XRAD
-----------
10 Total
1xVGA RAM
1XHDD
1xIntake
1xExhaust
2xPSU
3XRAD
-----------
10 Total
- Joined
- Jun 8, 2002
- Location
- Dunstable, uk
ATHLON XP SYSTEM
------------------------
1 80mm on cpu heatsink
1 standard gf4 440mx gpu fan
1 80mm on psu
total 3:
VIA C3 933 SYSTEM
------------------------
NONE HEHE
------------------------
1 80mm on cpu heatsink
1 standard gf4 440mx gpu fan
1 80mm on psu
total 3:
VIA C3 933 SYSTEM
------------------------
NONE HEHE
- Joined
- Nov 22, 2001
- Location
- Blacksburg, Virginia, USA
50-60mm:
GF4 Chipset Cooler
40mm:
On ram
80mm:
side intake
front intake
2 in psu
2 rear exhaust
92mm:
front intake
120mm:
on my AX7
10 Fans all together
GF4 Chipset Cooler
40mm:
On ram
80mm:
side intake
front intake
2 in psu
2 rear exhaust
92mm:
front intake
120mm:
on my AX7
10 Fans all together
Last edited:
- Joined
- Nov 5, 2002
- Location
- Seattle, WA
Lessee....
1 80mm intake, front case
3 80mm intakes, Antec side door
2 80mm exhausts, rear case
1 80mm exhaust, PSU
1 92mm exhaust, top of case
1 80mm Tornado, top of AX7
1 40mm on top of NB
10 fans..... or one very loud hairdryer.
1 80mm intake, front case
3 80mm intakes, Antec side door
2 80mm exhausts, rear case
1 80mm exhaust, PSU
1 92mm exhaust, top of case
1 80mm Tornado, top of AX7
1 40mm on top of NB
10 fans..... or one very loud hairdryer.
- Joined
- Sep 17, 2002
5 case fans
2 psu fans
1 vid card fan
1 cpu fan
9 total.
2 psu fans
1 vid card fan
1 cpu fan
9 total.
- Joined
- Sep 5, 2002
- Location
- Ballston Spa, NY
Well, I expected competition, but my 10 just doesn't seem all that impressive now
But I guess I can't complain with an air cooled overclock of 33% and a full load temp of 31C...
But I guess I can't complain with an air cooled overclock of 33% and a full load temp of 31C...
I got 17 fans going, sitting two feet from me and its not bad at all.
http://www.printroom.com/_vti_bin/ViewImage.dll?userid=robstyle&album_id=87825&image_id=2&courtesy=1
http://www.printroom.com/_vti_bin/ViewImage.dll?userid=robstyle&album_id=87825&image_id=2&courtesy=1
- Joined
- Feb 22, 2002
- Location
- Lost in Middle America, OH
2x80mm in psu
2x80mm for rear upper exhaust
2x120mmx38mm one front lower exhaust, one in top for exhaust
1x120mmx38mm a/c in side panel for exhaust
1 on chipset
1 on gpu
1x70mm on cpu
All case fans are exhaust, drawing outside air through a dryer hose and duct.
2x80mm for rear upper exhaust
2x120mmx38mm one front lower exhaust, one in top for exhaust
1x120mmx38mm a/c in side panel for exhaust
1 on chipset
1 on gpu
1x70mm on cpu
All case fans are exhaust, drawing outside air through a dryer hose and duct.
