oldfatman92
New Member
- Joined
- Aug 23, 2015
Hello all,
I need your opinions in regards to the temperature my system is running on my overclocked i7 5820K + Noctua NH-D15 dual fan setup. I will list the specs for complete picture.
Ambient Temperature: 85ºF or 29.444°C
Idle CPU Temperature: lowest core - 31°C, highest core 36°C
Max 100% Usage Temperature (Stress testing with AIDA64 and Intel Extreme Tuning Utility): 71°C
CPU: i7 5820K 4.2 ghz @1.17v (Handbrake x264 transcoding gave me a BSOD @1.15v)
CPU Cooler: Noctua NH-D15 dual fan setup
Motherboard: MSI X99S Gaming 7
GPU: EVGA GTX 980 Ti SC ACX 2.0 (overclocked without increasing voltage)
RAM: G.Skill Ripjaws 4 DDR4 2400 mhz {1.2v XMP enabled)
PSU: EVGA Supernova G2 850W Gold 80+
Hard Drives: Samsung 850 EVO 500GB + Seagate Barracuda 2TB
Case: Fractal Design Define R4 Black Pearl w/Window
Case Fans: 2x front (Thermaltake Riing 14 High Static Pressure Fan), 2x top (Rosewill 140mm Red LED Fan), 1x bottom (Thermaltake Riing 12 High Static Pressure Fan), 1x rear (Rosewill 120mm Red LED Fan)
When I use Intel Burn Test at Very High setting, cpu temp rises up to 78°C and I get similar temps for Prime95. Are Haswell chips supposed to hit these high temps when using IBT and Prime95 or is there something wrong with my system?
Thanks in advance.
I need your opinions in regards to the temperature my system is running on my overclocked i7 5820K + Noctua NH-D15 dual fan setup. I will list the specs for complete picture.
Ambient Temperature: 85ºF or 29.444°C
Idle CPU Temperature: lowest core - 31°C, highest core 36°C
Max 100% Usage Temperature (Stress testing with AIDA64 and Intel Extreme Tuning Utility): 71°C
CPU: i7 5820K 4.2 ghz @1.17v (Handbrake x264 transcoding gave me a BSOD @1.15v)
CPU Cooler: Noctua NH-D15 dual fan setup
Motherboard: MSI X99S Gaming 7
GPU: EVGA GTX 980 Ti SC ACX 2.0 (overclocked without increasing voltage)
RAM: G.Skill Ripjaws 4 DDR4 2400 mhz {1.2v XMP enabled)
PSU: EVGA Supernova G2 850W Gold 80+
Hard Drives: Samsung 850 EVO 500GB + Seagate Barracuda 2TB
Case: Fractal Design Define R4 Black Pearl w/Window
Case Fans: 2x front (Thermaltake Riing 14 High Static Pressure Fan), 2x top (Rosewill 140mm Red LED Fan), 1x bottom (Thermaltake Riing 12 High Static Pressure Fan), 1x rear (Rosewill 120mm Red LED Fan)
When I use Intel Burn Test at Very High setting, cpu temp rises up to 78°C and I get similar temps for Prime95. Are Haswell chips supposed to hit these high temps when using IBT and Prime95 or is there something wrong with my system?
Thanks in advance.