How much did you spend on your water-cooling kits/parts?

How much did you spend on your water-cooling kits/parts?

And what brand and model are they?

Maze2 -$45
Eheim1250 $55(pre-fitted with 1/2 brass barbs)
Custom chipset block $20 (had to buy $300 worth of stuff to aquire it, but sold all the extra at cost)
Military Spec H20 $3 (Bought a case 12x .99cents)
Tygon Tubing $20 (bought 100' sold it all at cost in an hour)
1/2 T fittings and hose clamps $3
Water Wetter $5.99
Heater core with 1/2 fittings $20
Shroud $2 for Sheetmetal
(2) Sanyo Denki Premium 120mm Fans $2.50 ea
Honkin Hoot 25watt Rheostat $15 (Use this for fans and already had it but just giving a accurite total.
Home-made Inline Water thermometer $8.99


$199.09 but well worth it, very little noise and load temps of 36-38*

Here's a pic when I was testing Tygon vs Regular reinforced Hoses(Notice you will see I used a stainless hose clamp on the reinforced hose as Tygon holds the barbs really well and the plastic clamps are just there as a precaution)

maze3 - $42
eheim 1048 - $56
5' silicon tube - $10
chevette rad - $20
120mm fan - $7
misc - $20

quality time modding computer - priceless

milled my own block 4 bucks for copper
maxijet 24 shipped
rad 18
fan 3.75
hose aprox 2

fittings, about 2

Danger Den Maze 2 - $50
Pump - Free
Tubing and fittings - $25
Rad - Free
Custom External Enclosure - $20
2 6" Fans - Used @ $5.00 each
AT PSU (For Peltiers) - Free

See my article (with photos) on the Water Station posted in this Forum.

im hoping for ...

20 aqua pump
20 heater core
45 maze 3
16 silicon or 26 tygon tubing
7 water wetter 12oz
9 hose clamps and a T fitting
0 plastic tupperware typ thingy i have already=res

<120