- Joined
- Oct 24, 2003
- Location
- Buffalo, NY
So far I have:
1) MCW6002 Waterblock
2) Dtek ProCore Radiator
3) ClearFlex 60 1/2'' ID / 3/4'' OD Tubing
4) MCP600 Pump
5) T-line
Going from an SP94 with a SFII, I went from 27 C / 40 C to 26 C / 35 C with ambient around 25-26 C. I'm pleased, especially with the raddy leaks fixed. I'm thinking about adding GPU block right after the cpu, so it's pump->raddy->cpu->gpu->pump. I've read that temps may increase by as much as 5 C to as little as 0.5 C. I have a 9800XT at stock clocks. What should I expect of my temps if adding a GPU block? I know the gpu core is capable of 475 volt modded and a high flow fan on the amd heatsink I have bolted on. However I removed the volt mods because of the increased heat.
1) MCW6002 Waterblock
2) Dtek ProCore Radiator
3) ClearFlex 60 1/2'' ID / 3/4'' OD Tubing
4) MCP600 Pump
5) T-line
Going from an SP94 with a SFII, I went from 27 C / 40 C to 26 C / 35 C with ambient around 25-26 C. I'm pleased, especially with the raddy leaks fixed. I'm thinking about adding GPU block right after the cpu, so it's pump->raddy->cpu->gpu->pump. I've read that temps may increase by as much as 5 C to as little as 0.5 C. I have a 9800XT at stock clocks. What should I expect of my temps if adding a GPU block? I know the gpu core is capable of 475 volt modded and a high flow fan on the amd heatsink I have bolted on. However I removed the volt mods because of the increased heat.