1.4 at 1.575

hyperbob · Oct 8, 2001

Okay after burning in at default speed a bit I am able to get to 1.575 without changing the vcore. I just have to change my ram voltage to 2.9 because of the extra FSB boost. Will I be able to reach 1.6 stable without changing the cpu vcore if I don't have temp problems?

WildDonkey · Oct 8, 2001

Hey Bob

Just curious what settings you are using FSB/Mult/Volt (Softmenu?)

Also what kind of temps are you seeing right now?

I am running hot I am pretty sure trying to compare what others are doing. Here is what I got right now:

Mult 11
FSB 133
Vlt 1.75 (Whatever the default is I can't remember)

Good luck moving on up

hyperbob · Oct 8, 2001

I am loading at 38-39C
This screenshot will tell you the rest.

Default · Oct 8, 2001

i've been told that the only way to reach that goal is by getting a REALY good PSU. But i don't think i'm guna cause 1.575 is enought to power everything out there.

hyperbob · Oct 8, 2001

If I get a good Enermax 431w PSU would I have a chance of going to 1.6 without changing the cpu vcore?

Default · Oct 8, 2001

most likely, cause i have gone all the way to 1.85 and still can'ty get past 1.575

WildDonkey · Oct 8, 2001

Thanks for the info Bob!,

I upped my FSB to 143 and I am gonna sit tight until I see how stable it is.

1.4 at 1.575

hyperbob

Member

WildDonkey

New Member

hyperbob

Member

Default

Disabled

hyperbob

Member

Default

Disabled

WildDonkey

New Member

Similar threads