- Joined
- Aug 5, 2002
- Location
- Brisbane, Australia
Awesome temps on my Opteron 146 CABYE 0540 FPBW cooled by only Corsair Hydrocool with 1/4" tubing in 30+ C room temps http://i4memory.com/showthread.php?t=1594
Changed to 510-2FIX bios with 2x256MB Gskill PC4400LE TCCD 431 in Yellow dimm slots and much more stable it seems
Room ambient = 29.5-31.5C right now
CPU idle = 37-38C
CPU load = 48-50C
Opteron 146 CABYE 0540 FPBW Corsair Hydrocool Water cooled
DFI NF4 Ultra-D R.AD0 510-2FIX bios
1x BFG 7800GTX 77.72WHQL drivers
1x 160GB Seagate Barracuda 7200.7 SATA NCQ
Liteon 48x24x48x CD Burner
Floppy drive
510W PC Powercooling SLI psu
WinXP Pro SP2 - very old install left over from DFI NF4 SLI-D i had (haven't bothered to do a fresh reinstall yet)
NF4 6.53WHQL chipset drivers
chipset = 1.6v
LDT = 1.3v
LDT 3x
10x 300mhz 2.5-4-3-7 8-18-2223 at 2.9v
CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 8
Row Refresh Cycle Time(Trfc) = 18
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3684
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 7
DRAM Data Drive Strength = Level 1
Max Async Latency = 9ns
Read Preamble Time = 6.5ns
Idle Cycle Limit = 16
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(8burst)
Changed to 510-2FIX bios with 2x256MB Gskill PC4400LE TCCD 431 in Yellow dimm slots and much more stable it seems
Room ambient = 29.5-31.5C right now
CPU idle = 37-38C
CPU load = 48-50C
Opteron 146 CABYE 0540 FPBW Corsair Hydrocool Water cooled
DFI NF4 Ultra-D R.AD0 510-2FIX bios
1x BFG 7800GTX 77.72WHQL drivers
1x 160GB Seagate Barracuda 7200.7 SATA NCQ
Liteon 48x24x48x CD Burner
Floppy drive
510W PC Powercooling SLI psu
WinXP Pro SP2 - very old install left over from DFI NF4 SLI-D i had (haven't bothered to do a fresh reinstall yet)
NF4 6.53WHQL chipset drivers
chipset = 1.6v
LDT = 1.3v
LDT 3x
10x 300mhz 2.5-4-3-7 8-18-2223 at 2.9v
CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 8
Row Refresh Cycle Time(Trfc) = 18
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3684
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 7
DRAM Data Drive Strength = Level 1
Max Async Latency = 9ns
Read Preamble Time = 6.5ns
Idle Cycle Limit = 16
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(8burst)