- Joined
- Jul 26, 2005
- Location
- Vancouver, Canada
I've got my E2140 running @ 2.8ghz w/ 1.325v. Unfortunately due to some problems with my tuniq tower, it has a load temp of 70 degrees. I was wondering what the thermal specification is for the E2140?
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
Thermal Specification of E2140?
- Thread starter White_Pawn
- Start date
- Joined
- Nov 26, 2005
- Location
- Concord, NC
OP
- Joined
- Jul 26, 2005
- Location
- Vancouver, Canada
- Thread Starter
- #3
core temp.
Haven't lapped yet, ain't lapping stuff for awhile.
TT lost a screw to hold the tower down to the cpu. I'll be getting another screw tuesday courtesy of ncix.
Haven't lapped yet, ain't lapping stuff for awhile.
TT lost a screw to hold the tower down to the cpu. I'll be getting another screw tuesday courtesy of ncix.
- Joined
- Nov 26, 2005
- Location
- Concord, NC
You might want to throttle down a bit until you get the screw. Unless you have duct tape! 
Which stepping do you have?
Which stepping do you have?
OP
- Joined
- Jul 26, 2005
- Location
- Vancouver, Canada
- Thread Starter
- #5
Q705A 314
I saw some other Q705A cpu get 3.66ghz w/ 1.57v.
I saw some other Q705A cpu get 3.66ghz w/ 1.57v.
- Joined
- Nov 26, 2005
- Location
- Concord, NC
White_Pawn said:
Not sure what that code (Q705A 314) means...when I say which stepping I mean G0 or L2.
If he's running 1.57v he better be on water cooling. I wouldn't put that much into an air-cooled setup...especially w/ a missing screw.
Remember that every chip is different. You can only hope to get what someone else gets.
