- Joined
- Jan 13, 2005
ok i am getting a strange error when i try to regain my 100Mhz lost when my PSU was going out. i used to be able to run 3.4Ghz no prob and have it be stable but now its giving me crap.
specs are in sig, i have tried 310 x 11 and 285 x 12 and i get the same error.
this is what the error says....
clock interupt was not recived on a seccondary processor with in the allocated time interval.
sounded to me like it wasnt gettin enough juice so i upped gradualy from 1.36v at 3300Mhz which it was fine at to about 1.485v which is alot more than i used to need to run 3.4 but it still does it, tried loosening the timings and its on a divider of 8 or 9 so the ram is running less than 800Mhz i also tried upping the voltage on the ram, chipset and ht. still no good
computer is in sig minus the antec PSU its an OCZ Stealth 600w now
specs are in sig, i have tried 310 x 11 and 285 x 12 and i get the same error.
this is what the error says....
clock interupt was not recived on a seccondary processor with in the allocated time interval.
sounded to me like it wasnt gettin enough juice so i upped gradualy from 1.36v at 3300Mhz which it was fine at to about 1.485v which is alot more than i used to need to run 3.4 but it still does it, tried loosening the timings and its on a divider of 8 or 9 so the ram is running less than 800Mhz i also tried upping the voltage on the ram, chipset and ht. still no good
computer is in sig minus the antec PSU its an OCZ Stealth 600w now
