• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Have a Problem.

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
Hardass

Hardass

Senior Member
​
Joined
Nov 3, 2001
Just found this.
Code: 
[08:09:58] Completed 100%
[08:09:59] Successful run
[08:09:59] DynamicWrapper: Finished Work Unit: sleep=10000
[08:10:09] Reserved 112888 bytes for xtc file; Cosm status=0
[08:10:09] Allocated 112888 bytes for xtc file
[08:10:09] - Reading up to 112888 from "work/wudata_01.xtc": Read 112888
[08:10:09] Read 112888 bytes from xtc file; available packet space=786317576
[08:10:09] xtc file hash check passed.
[08:10:09] Reserved 33528 33528 786317576 bytes for arc file=<work/wudata_01.trr> Cosm status=0
[08:10:09] Allocated 33528 bytes for arc file
[08:10:09] - Reading up to 33528 from "work/wudata_01.trr": Read 33528
[08:10:09] Read 33528 bytes from arc file; available packet space=786284048
[08:10:09] trr file hash check passed.
[08:10:09] Allocated 560 bytes for edr file
[08:10:09] Read bedfile
[08:10:09] edr file hash check passed.
[08:10:09] Allocated 31209 bytes for logfile
[08:10:09] Read logfile
[08:10:09] GuardedRun: success in DynamicWrapper
[08:10:09] GuardedRun: done
[08:10:09] Run: GuardedRun completed.
[08:10:12] - Writing 178697 bytes of core data to disk...
[08:10:12] Done: 178185 -> 155752 (compressed to 87.4 percent)
[08:10:12]   ... Done.
[08:10:12] - Shutting down core 
[08:10:12] 
[08:10:12] Folding@home Core Shutdown: FINISHED_UNIT
[08:10:15] CoreStatus = 64 (100)
[08:10:15] Unit 1 finished with 97 percent of time to deadline remaining.
[08:10:15] Updated performance fraction: 0.974143
[08:10:15] Sending work to server
[08:10:15] Project: 5751 (Run 6, Clone 169, Gen 118)
[08:10:15] - Read packet limit of 540015616... Set to 524286976.


[08:10:15] + Attempting to send results [February 22 08:10:15 UTC]
[08:10:15] - Reading file work/wuresults_01.dat from core
[08:10:15]   (Read 156264 bytes from disk)
[08:10:15] Connecting to http://171.67.108.11:8080/
[08:10:16] - Couldn't send HTTP request to server
[08:10:16] + Could not connect to Work Server (results)
[08:10:16]     (171.67.108.11:8080)
[08:10:16] + Retrying using alternative port
[08:10:16] Connecting to http://171.67.108.11:80/
[08:10:18] - Couldn't send HTTP request to server
[08:10:18] + Could not connect to Work Server (results)
[08:10:18]     (171.67.108.11:80)
[08:10:18] - Error: Could not transmit unit 01 (completed February 22) to work server.
[08:10:18] - 1 failed uploads of this unit.
[08:10:18]   Keeping unit 01 in queue.
[08:10:18] Trying to send all finished work units
[08:10:18] Project: 5751 (Run 6, Clone 169, Gen 118)
[08:10:18] - Read packet limit of 540015616... Set to 524286976.


[08:10:18] + Attempting to send results [February 22 08:10:18 UTC]
[08:10:18] - Reading file work/wuresults_01.dat from core
[08:10:18]   (Read 156264 bytes from disk)
[08:10:18] Connecting to http://171.67.108.11:8080/
[08:10:19] - Couldn't send HTTP request to server
[08:10:19] + Could not connect to Work Server (results)
[08:10:19]     (171.67.108.11:8080)
[08:10:19] + Retrying using alternative port
[08:10:19] Connecting to http://171.67.108.11:80/
[08:10:20] - Couldn't send HTTP request to server
[08:10:20] + Could not connect to Work Server (results)
[08:10:20]     (171.67.108.11:80)
[08:10:20] - Error: Could not transmit unit 01 (completed February 22) to work server.
[08:10:20] - 2 failed uploads of this unit.
[08:10:20] - Read packet limit of 540015616... Set to 524286976.


[08:10:20] + Attempting to send results [February 22 08:10:20 UTC]
[08:10:20] - Reading file work/wuresults_01.dat from core
[08:10:20]   (Read 156264 bytes from disk)
[08:10:20] Connecting to http://171.67.108.25:8080/
[08:10:20] - Couldn't send HTTP request to server
[08:10:20]   (Got status 503)
[08:10:20] + Could not connect to Work Server (results)
[08:10:20]     (171.67.108.25:8080)
[08:10:20] + Retrying using alternative port
[08:10:20] Connecting to http://171.67.108.25:80/
[08:10:20] - Couldn't send HTTP request to server
[08:10:20]   (Got status 503)
[08:10:20] + Could not connect to Work Server (results)
[08:10:20]     (171.67.108.25:80)
[08:10:20]   Could not transmit unit 01 to Collection server; keeping in queue.
[08:10:20] + Sent 0 of 1 completed units to the server
[08:10:20] - Preparing to get new work unit...
[08:10:20] + Attempting to get work packet
[08:10:20] - Will indicate memory of 2814 MB
[08:10:20] - Connecting to assignment server
[08:10:20] Connecting to http://assign-GPU.stanford.edu:8080/
[08:10:21] Posted data.
[08:10:21] Initial: 40AB; - Successful: assigned to (171.64.122.70).
[08:10:21] + News From Folding@Home: GPU folding beta
[08:10:21] Loaded queue successfully.
[08:10:21] Connecting to http://171.64.122.70:8080/
[08:10:21] Posted data.
[08:10:21] Initial: 0000; - Receiving payload (expected size: 66572)
[08:10:22] - Downloaded at ~65 kB/s
[08:10:22] - Averaged speed for that direction ~72 kB/s
[08:10:22] + Received work.
[08:10:22] Trying to send all finished work units
[08:10:22] Project: 5751 (Run 6, Clone 169, Gen 118)
[08:10:22] - Read packet limit of 540015616... Set to 524286976.


[08:10:22] + Attempting to send results [February 22 08:10:22 UTC]
[08:10:22] - Reading file work/wuresults_01.dat from core
[08:10:22]   (Read 156264 bytes from disk)
[08:10:22] Connecting to http://171.67.108.11:8080/
[08:10:23] - Couldn't send HTTP request to server
[08:10:23] + Could not connect to Work Server (results)
[08:10:23]     (171.67.108.11:8080)
[08:10:23] + Retrying using alternative port
[08:10:23] Connecting to http://171.67.108.11:80/
[08:10:24] - Couldn't send HTTP request to server
[08:10:24] + Could not connect to Work Server (results)
[08:10:24]     (171.67.108.11:80)
[08:10:24] - Error: Could not transmit unit 01 (completed February 22) to work server.
[08:10:24] - 3 failed uploads of this unit.
[08:10:24] - Read packet limit of 540015616... Set to 524286976.


[08:10:24] + Attempting to send results [February 22 08:10:24 UTC]
[08:10:24] - Reading file work/wuresults_01.dat from core
[08:10:24]   (Read 156264 bytes from disk)
[08:10:24] Connecting to http://171.67.108.25:8080/
[08:10:24] - Couldn't send HTTP request to server
[08:10:24]   (Got status 503)
[08:10:24] + Could not connect to Work Server (results)
[08:10:24]     (171.67.108.25:8080)
[08:10:24] + Retrying using alternative port
[08:10:24] Connecting to http://171.67.108.25:80/
[08:10:24] - Couldn't send HTTP request to server
[08:10:24]   (Got status 503)
[08:10:24] + Could not connect to Work Server (results)
[08:10:24]     (171.67.108.25:80)
[08:10:24]   Could not transmit unit 01 to Collection server; keeping in queue.
[08:10:24] + Sent 0 of 1 completed units to the server
[08:10:24] + Closed connections
[08:10:24] 
[08:10:24] + Processing work unit
[08:10:24] Core required: FahCore_14.exe
[08:10:24] Core not found.
[08:10:24] - Core is not present or corrupted.
[08:10:24] - Attempting to download new core...
[08:10:24] + Downloading new core: FahCore_14.exe
[08:10:24] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:10:25] - Error: HTTP GET returned error code 404
[08:10:25] + Error: Could not download core
[08:10:25] + Core download error (#2), waiting before retry...

[08:10:42] + Downloading new core: FahCore_14.exe
[08:10:42] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:10:42] - Error: HTTP GET returned error code 404
[08:10:42] + Error: Could not download core
[08:10:42] + Core download error (#3), waiting before retry...

[08:11:00] + Downloading new core: FahCore_14.exe
[08:11:00] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:11:00] - Error: HTTP GET returned error code 404
[08:11:00] + Error: Could not download core
[08:11:00] + Core download error (#4), waiting before retry...

[08:11:34] + Downloading new core: FahCore_14.exe
[08:11:34] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:11:34] - Error: HTTP GET returned error code 404
[08:11:34] + Error: Could not download core
[08:11:34] + Core download error (#5), waiting before retry...

[08:12:24] + Downloading new core: FahCore_14.exe
[08:12:24] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:12:25] - Error: HTTP GET returned error code 404
[08:12:25] + Error: Could not download core
[08:12:25] + Core download error (#6), waiting before retry...

[08:13:59] + Downloading new core: FahCore_14.exe
[08:13:59] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:14:00] - Error: HTTP GET returned error code 404
[08:14:00] + Error: Could not download core
[08:14:00] + Core download error (#7), waiting before retry...

[08:16:45] + Downloading new core: FahCore_14.exe
[08:16:45] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:16:45] - Error: HTTP GET returned error code 404
[08:16:45] + Error: Could not download core
[08:16:45] + Core download error (#8), waiting before retry...

[08:22:14] + Downloading new core: FahCore_14.exe
[08:22:14] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:22:14] - Error: HTTP GET returned error code 404
[08:22:14] + Error: Could not download core
[08:22:14] + Core download error (#9), waiting before retry...

[08:33:01] + Downloading new core: FahCore_14.exe
[08:33:01] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:33:01] - Error: HTTP GET returned error code 404
[08:33:01] + Error: Could not download core
[08:33:01] + Core download error (#10), waiting before retry...

[08:54:30] + Downloading new core: FahCore_14.exe
[08:54:30] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[08:54:31] - Error: HTTP GET returned error code 404
[08:54:31] + Error: Could not download core
[08:54:31] + Core download error (#11), waiting before retry...

[09:37:19] + Downloading new core: FahCore_14.exe
[09:37:19] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[09:37:19] - Error: HTTP GET returned error code 404
[09:37:19] + Error: Could not download core
[09:37:19] + Core download error (#12), waiting before retry...

[10:09:49] - Autosending finished units... [February 22 10:09:49 UTC]
[10:09:49] Trying to send all finished work units
[10:09:49] Project: 5751 (Run 6, Clone 169, Gen 118)
[10:09:49] - Read packet limit of 540015616... Set to 524286976.


[10:09:49] + Attempting to send results [February 22 10:09:49 UTC]
[10:09:49] - Reading file work/wuresults_01.dat from core
[10:09:49]   (Read 156264 bytes from disk)
[10:09:49] Connecting to http://171.67.108.11:8080/
[10:09:50] - Couldn't send HTTP request to server
[10:09:50] + Could not connect to Work Server (results)
[10:09:50]     (171.67.108.11:8080)
[10:09:50] + Retrying using alternative port
[10:09:50] Connecting to http://171.67.108.11:80/
[10:09:51] - Couldn't send HTTP request to server
[10:09:51] + Could not connect to Work Server (results)
[10:09:51]     (171.67.108.11:80)
[10:09:51] - Error: Could not transmit unit 01 (completed February 22) to work server.
[10:09:51] - 4 failed uploads of this unit.
[10:09:51] - Read packet limit of 540015616... Set to 524286976.


[10:09:51] + Attempting to send results [February 22 10:09:51 UTC]
[10:09:51] - Reading file work/wuresults_01.dat from core
[10:09:51]   (Read 156264 bytes from disk)
[10:09:51] Connecting to http://171.67.108.25:8080/
[10:09:52] Posted data.
[10:09:53] Initial: 0000; - Uploaded at ~76 kB/s
[10:09:53] - Averaged speed for that direction ~71 kB/s
[10:09:53] - Server does not have record of this unit. Will try again later.
[10:09:53]   Could not transmit unit 01 to Collection server; keeping in queue.
[10:09:53] + Sent 0 of 1 completed units to the server
[10:09:53] - Autosend completed
[10:25:20] + Downloading new core: FahCore_14.exe
[10:25:20] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[10:25:20] - Error: HTTP GET returned error code 404
[10:25:20] + Error: Could not download core
[10:25:20] + Core download error (#13), waiting before retry...

[11:13:35] + Downloading new core: FahCore_14.exe
[11:13:35] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[11:13:35] - Error: HTTP GET returned error code 404
[11:13:35] + Error: Could not download core
[11:13:35] + Core download error (#14), waiting before retry...

[12:01:43] + Downloading new core: FahCore_14.exe
[12:01:43] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[12:01:44] - Error: HTTP GET returned error code 404
[12:01:44] + Error: Could not download core
[12:01:44] + Core download error (#15), waiting before retry...

[12:49:56] + Downloading new core: FahCore_14.exe
[12:49:56] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[12:49:56] - Error: HTTP GET returned error code 404
[12:49:56] + Error: Could not download core
[12:49:56] + Core download error (#16), waiting before retry...

[13:38:01] + Downloading new core: FahCore_14.exe
[13:38:01] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[13:38:01] - Error: HTTP GET returned error code 404
[13:38:01] + Error: Could not download core
[13:38:01] + Core download error (#17), waiting before retry...

Was just about to shut this rig down to change out mobo. Do not want to lose these WU,s.
 
So no way to get it to send the other completed units?
 
If the core was not 14, then they can be sent for full credit. Only The 14 core wu's were not supposed to go out. The Pande guys say to delete them. Full details are in the FAH forum that Jolly Swagman linked to.
 
You might try this. Stop the client, open the work directory and delete all the files NOT associated with WU 1. Run qfix then restart the client. That may keep you from losing Project: 5751 (Run 6, Clone 169, Gen 118) and get you out of the core 14 loop.
 
Have already tore rig down. Now have 3 cards running in my 780i. All seem to be happy together. Now have to set up the 790i, only have 1 card for it right now.:(
 
Hardass said:
Have already tore rig down. Now have 3 cards running in my 780i. All seem to be happy together. Now have to set up the 790i, only have 1 card for it right now.:(
Click to expand...

My two rigs that were stuck on core_14 eventually returned the completed work and downloaded core_14 to run project 5900. One 5900 crashed and the other is still going. See the log below. Your time stamps are similar to mine, so you may have pulled the trigger a few minutes early.

If the FAH files are still intact on the old rig, you may be able to transfer the work to another working rig and return the results, similar to moving work from one rig to another. If so, suggest your run -oneunit on a GPU, then after the current work completes, delete the work folder and copy the finished work (work dir, queue.dat, fahcore_11, unitinfo.txt) into the working rig and restart FAH.


Code: 
[11:06:02] + Core download error (#14), waiting before retry...

[11:54:05] + Downloading new core: FahCore_14.exe
[11:54:05] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[11:54:05] - Error: HTTP GET returned error code 404
[11:54:05] + Error: Could not download core
[11:54:05] + Core download error (#15), waiting before retry...

[12:04:48] - Autosending finished units... [February 22 12:04:48 UTC]
[12:04:48] Trying to send all finished work units
[12:04:48] Project: 5749 (Run 7, Clone 253, Gen 127)
[12:04:48] - Read packet limit of 540015616... Set to 524286976.


[12:04:48] + Attempting to send results [February 22 12:04:48 UTC]
[12:04:48] - Reading file work/wuresults_05.dat from core
[12:04:48]   (Read 155659 bytes from disk)
[12:04:48] Connecting to http://171.67.108.11:8080/
[12:04:49] Posted data.
[12:04:49] Initial: 0000; - Uploaded at ~76 kB/s
[12:04:50] - Averaged speed for that direction ~94 kB/s
[12:04:50] + Results successfully sent
[12:04:50] Thank you for your contribution to Folding@Home.
[12:04:50] + Number of Units Completed: 1708

[12:04:50] + Sent 1 of 1 completed units to the server
[12:04:50] - Autosend completed
[12:42:15] + Downloading new core: FahCore_14.exe
[12:42:15] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[12:42:15] - Error: HTTP GET returned error code 404
[12:42:15] + Error: Could not download core
[12:42:15] + Core download error (#16), waiting before retry...

[13:30:25] + Downloading new core: FahCore_14.exe
[13:30:25] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[13:30:25] - Error: HTTP GET returned error code 404
[13:30:25] + Error: Could not download core
[13:30:25] + Core download error (#17), waiting before retry...

[14:18:36] + Downloading new core: FahCore_14.exe
[14:18:36] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[14:18:37] - Error: HTTP GET returned error code 404
[14:18:37] + Error: Could not download core
[14:18:37] + Core download error (#18), waiting before retry...

[15:06:40] + Downloading new core: FahCore_14.exe
[15:06:40] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[15:06:41] - Error: HTTP GET returned error code 404
[15:06:41] + Error: Could not download core
[15:06:41] + Core download error (#19), waiting before retry...

[15:54:54] + Downloading new core: FahCore_14.exe
[15:54:54] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_14.fah from www.stanford.edu)
[15:54:54] Initial: AFDE; + 10240 bytes downloaded
[15:54:55] Initial: B7E9; + 20480 bytes downloaded
[15:54:55] Initial: E1BD; + 30720 bytes downloaded
[15:54:55] Initial: 7AAF; + 40960 bytes downloaded
[15:54:55] Initial: 9706; + 51200 bytes downloaded
[15:54:55] Initial: 0939; + 61440 bytes downloaded
[15:54:55] Initial: C351; + 71680 bytes downloaded
[15:54:55] Initial: AC00; + 81920 bytes downloaded
[15:54:55] Initial: C6A1; + 92160 bytes downloaded
[15:54:55] Initial: F0E8; + 102400 bytes downloaded
[15:54:55] Initial: C710; + 112640 bytes downloaded
[15:54:55] Initial: E38F; + 122880 bytes downloaded
[15:54:55] Initial: C5A9; + 133120 bytes downloaded
[15:54:55] Initial: 3CFB; + 143360 bytes downloaded
[15:54:55] Initial: 785B; + 153600 bytes downloaded
[15:54:55] Initial: 57EB; + 163840 bytes downloaded
[15:54:55] Initial: 9ACB; + 174080 bytes downloaded
[15:54:56] Initial: 7601; + 184320 bytes downloaded
[15:54:56] Initial: 5D5F; + 194560 bytes downloaded
[15:54:56] Initial: C575; + 204800 bytes downloaded
[15:54:56] Initial: 7C03; + 215040 bytes downloaded
[15:54:56] Initial: 0784; + 225280 bytes downloaded
[15:54:56] Initial: 58A4; + 235520 bytes downloaded
[15:54:56] Initial: 6042; + 245760 bytes downloaded
[15:54:56] Initial: 805D; + 256000 bytes downloaded
[15:54:56] Initial: 56A3; + 266240 bytes downloaded
[15:54:56] Initial: EFF9; + 276480 bytes downloaded
[15:54:56] Initial: 2A32; + 286720 bytes downloaded
[15:54:56] Initial: 677B; + 296960 bytes downloaded
[15:54:56] Initial: 847E; + 307200 bytes downloaded
[15:54:56] Initial: AE08; + 317440 bytes downloaded
[15:54:56] Initial: 5C27; + 327680 bytes downloaded
[15:54:56] Initial: 3A1A; + 337920 bytes downloaded
[15:54:56] Initial: 03FC; + 348160 bytes downloaded
[15:54:56] Initial: CFC7; + 358400 bytes downloaded
[15:54:56] Initial: 751E; + 368640 bytes downloaded
[15:54:56] Initial: 9909; + 378880 bytes downloaded
[15:54:56] Initial: 1592; + 389120 bytes downloaded
[15:54:56] Initial: C3F2; + 399360 bytes downloaded
[15:54:56] Initial: C617; + 409600 bytes downloaded
[15:54:56] Initial: 0D04; + 419840 bytes downloaded
[15:54:56] Initial: 0AD4; + 430080 bytes downloaded
[15:54:56] Initial: AC8D; + 440320 bytes downloaded
[15:54:56] Initial: 010B; + 450560 bytes downloaded
[15:54:56] Initial: 64F6; + 460800 bytes downloaded
[15:54:56] Initial: 77AE; + 471040 bytes downloaded
[15:54:56] Initial: 8098; + 481280 bytes downloaded
[15:54:56] Initial: 9E45; + 491520 bytes downloaded
[15:54:56] Initial: 30AA; + 501760 bytes downloaded
[15:54:56] Initial: 1FC7; + 512000 bytes downloaded
[15:54:56] Initial: 7531; + 522240 bytes downloaded
[15:54:56] Initial: C30E; + 532480 bytes downloaded
[15:54:56] Initial: 360F; + 542720 bytes downloaded
[15:54:56] Initial: 4BA2; + 552960 bytes downloaded
[15:54:56] Initial: F6D2; + 563200 bytes downloaded
[15:54:56] Initial: 1811; + 573440 bytes downloaded
[15:54:56] Initial: BB34; + 583680 bytes downloaded
[15:54:56] Initial: 0531; + 593920 bytes downloaded
[15:54:56] Initial: 3B09; + 604160 bytes downloaded
[15:54:57] Initial: 8325; + 614400 bytes downloaded
[15:54:57] Initial: 7708; + 624640 bytes downloaded
[15:54:57] Initial: 8600; + 634880 bytes downloaded
[15:54:57] Initial: F1F9; + 645120 bytes downloaded
[15:54:57] Initial: C02C; + 655360 bytes downloaded
[15:54:57] Initial: 7CA5; + 659569 bytes downloaded
[15:54:57] Verifying core Core_14.fah...
[15:54:57] Signature is VALID
[15:54:57] 
[15:54:57] Trying to unzip core FahCore_14.exe
[15:54:57] Decompressed FahCore_14.exe (1900544 bytes) successfully
[15:55:02] + Core successfully engaged
[15:55:07] 
[15:55:07] + Processing work unit
[15:55:07] Core required: FahCore_14.exe
[15:55:07] Core found.
[15:55:07] Working on queue slot 06 [February 22 15:55:07 UTC]
[15:55:07] + Working ...
[15:55:07] - Calling '.\FahCore_14.exe -dir work/ -suffix 06 -priority 96 -nocpulock -checkpoint 30 -verbose -lifeline 516 -version 623'

[15:55:07] 
[15:55:07] *------------------------------*
[15:55:07] Folding@Home GPU Core - Beta
[15:55:07] Version 1.22 (Thu Feb 19 16:01:17 PST 2009)
[15:55:07] 
[15:55:07] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[15:55:07] Build host: vspm46
[15:55:07] Board Type: Nvidia
[15:55:07] Core      : 
[15:55:07] Preparing to commence simulation
[15:55:07] - Looking at optimizations...
[15:55:07] - Created dyn
[15:55:07] - Files status OK
[15:55:07] - Expanded 66309 -> 360060 (decompressed 543.0 percent)
[15:55:07] Called DecompressByteArray: compressed_data_size=66309 data_size=360060, decompressed_data_size=360060 diff=0
[15:55:08] - Digital signature verified
[15:55:08] 
[15:55:08] Project: 5900 (Run 12, Clone 25, Gen 0)
[15:55:08] 
[15:55:08] Assembly optimizations on if available.
[15:55:08] Entering M.D.
[15:55:13] Tpr hash work/wudata_06.tpr:  1616749626 2535325910 1910397987 2528592481 260519656
[15:55:14] Working on Protein
[15:55:17] Client config found, loading data.
[15:55:17] Starting GUI Server
[15:56:45] Completed 1%
[15:59:08] Completed 2%
[16:01:26] Completed 3%
[16:03:39] Completed 4%
[16:05:50] Completed 5%
[16:08:13] Completed 6%
[16:10:35] Completed 7%
[16:12:46] Completed 8%
[16:14:58] Completed 9%
[16:17:06] Completed 10%
[16:19:10] Completed 11%
[16:21:15] Completed 12%
[16:23:44] Completed 13%
[16:25:53] Completed 14%
[16:28:09] Completed 15%
[16:30:18] Completed 16%
[16:32:34] Completed 17%
[16:34:35] Completed 18%
[16:36:59] Completed 19%
[16:39:34] Completed 20%
[16:41:34] Completed 21%
[16:43:35] Completed 22%
[16:45:47] Completed 23%
[16:48:15] Completed 24%
[16:50:42] Completed 25%
[16:53:02] Completed 26%
[16:55:07] Completed 27%
[16:57:24] Completed 28%
[16:59:45] Completed 29%
[17:02:04] Completed 30%
[17:04:14] Completed 31%
[17:06:25] Completed 32%
[17:08:34] Completed 33%
[17:10:49] Completed 34%
[17:13:04] Completed 35%
[17:15:20] Completed 36%
[17:17:35] Completed 37%
[17:19:50] Completed 38%
[17:21:59] Completed 39%
[17:24:17] Completed 40%
[17:26:28] Completed 41%
[17:28:35] Completed 42%
[17:30:53] Completed 43%
[17:33:13] Completed 44%
[17:35:32] Completed 45%
[17:37:27] Completed 46%
[17:39:41] Completed 47%
[17:41:54] Completed 48%
[17:44:15] Completed 49%
[17:46:19] Completed 50%
[17:48:18] Completed 51%
[17:50:40] Completed 52%
[17:53:00] Completed 53%
[17:55:17] Completed 54%
[17:57:45] Completed 55%
[17:59:45] Completed 56%
[18:01:41] Completed 57%
[18:03:53] Completed 58%
[18:04:50] - Autosending finished units... [February 22 18:04:50 UTC]
[18:04:50] Trying to send all finished work units
[18:04:50] + No unsent completed units remaining.
[18:04:50] - Autosend completed
[18:04:50] + Working...
[18:06:08] Completed 59%
[18:08:38] Completed 60%
[18:10:57] Completed 61%
[18:13:06] Completed 62%
[18:15:09] Completed 63%
[18:17:28] Completed 64%
[18:19:46] Completed 65%
[18:22:01] Completed 66%
[18:24:08] Completed 67%
[18:26:24] Completed 68%
[18:28:28] Completed 69%
[18:30:39] Completed 70%
 
Next problem is, installed 3x GTX 260 in my 780i. Points production has dropped as it is taking 2 cards twice as long to complete a frame. All cards running same shader clocks.

 
Could be two instances are running on same GPU. check the GPU flags. You can watch each GPU temperature as you start each instance to confirm which GPU the instance is running on.
 
HayesK said:
Could be two instances are running on same GPU. check the GPU flags. You can watch each GPU temperature as you start each instance to confirm which GPU the instance is running on.
Click to expand...

Looks like a conflict with SMP. Shut down smp and temp on #3 shot up to over 72c running like it should. Then shut dowm, showing unstable machine and will not restart.
 
Hardass said:
Looks like a conflict with SMP. Shut down smp and temp on #3 shot up to over 72c running like it should. Then shut dowm, showing unstable machine and will not restart.
Click to expand...

make sure you have priority set to 96 in your cfg files for GPU clients, then manually set priority to low for SMP client.
 
cw823 said:
make sure you have priority set to 96 in your cfg files for GPU clients, then manually set priority to low for SMP client.
Click to expand...

Thanks, made the change on 3x gpu,s and all running. Have not changed smp yet. Now heat on that middle card is going to be a problem. Have a VF 1000 on it and it is still hitting 76c. Can not run this like this. Would card be better off with stock cooler back on it?
 
Hardass said:
Thanks, made the change on 3x gpu,s and all running. Have not changed smp yet. Now heat on that middle card is going to be a problem. Have a VF 1000 on it and it is still hitting 76c. Can not run this like this. Would card be better off with stock cooler back on it?
Click to expand...

For a multi-card rig I'd probably stick with the stock cooler only because it exhausts air outside the case, I think that's how the stock cooler on those GTX260s works, right? I always tried to stick with a case that let me blow cold outside (the case) air directly on the cards, as well. Not sure if that's a possibility in your case.

You have to be making some sweet PPD at this point, that's for sure.
 
cw823 said:
For a multi-card rig I'd probably stick with the stock cooler only because it exhausts air outside the case, I think that's how the stock cooler on those GTX260s works, right? I always tried to stick with a case that let me blow cold outside (the case) air directly on the cards, as well. Not sure if that's a possibility in your case.

You have to be making some sweet PPD at this point, that's for sure.
Click to expand...

Open bench, no case. Also how do I change priority on the smp to low?
 
cw823 said:
Task manager, If it's just WinSMP I would assume you'd need to right-click each core and then "set priority", low.
Click to expand...

Just running one instance of smp since it is on a E8500. Have not restarted it yet.
 
Hardass said:
Just running one instance of smp since it is on a E8500. Have not restarted it yet.
Click to expand...

With WinSMP I think it still runs 4 core processes, would need to set each of those to "low" via task manager to avoid them stealing CPU cycles from GPU clients.
 
cw823 said:
With WinSMP I think it still runs 4 core processes, would need to set each of those to "low" via task manager to avoid them stealing CPU cycles from GPU clients.
Click to expand...

But the gpu client I run does not use but 1-4% cpu.
 
Hardass said:
But the gpu client I run does not use but 1-4% cpu.
Click to expand...

It's been my experience that no matter how small the CPU usage for each GPU client, unless SMP and/or VM priority is set to low they will still steal CPU cycles. Never made sense to me as VMs always left 6-9% available but if I didn't have them at low priority my GPU PPD would be cut by around 30%
 
I pulled 3rd card. Too many problems. Put it in second rig.
 
You must log in or register to reply here.

Similar threads

FoldingAddict
Hung with no error
Replies
18
Views
785
Holdolin
Holdolin
dfonda
Gen 2 with RTX 3080 log for TPF info.
Replies
2
Views
964
dfonda
dfonda
Cjwinnit
Help - got WU but not folding
Replies
7
Views
791
Cjwinnit
Cjwinnit
Zerileous
PPD problem
Replies
3
Views
886
Zerileous
Zerileous
David
Recurring issue: "No domain decomposition"
Replies
5
Views
1K
David
David
Back