10.5 multiplier?

[BIB]

I was just trying to boot above 200fsb with my abit NF7-S(10.5x202). of course it did not boot and just hung up. So i had to clear the cmos. So i tried to boot at 10.5x200 (which is a stable speed, because i can get my oc higher) and i was unstable. Most of the time i could not get the windows icons to load up.
So did i just lose the 10.5 multiplier by trying to get above 200 with it?

 

[BartonBadBoy]

no, how old is your board, what bios revision are you using??? do you have cpu interface enabled???? what vcore/vdimm/vdd voltages are you using????

sounds like the age old problem with the bios to me, if youve got cpu interface enabled, try turning it off, you'll loose a lot of speed, but it will let you know if thats causing the problem

have you tried using the original d10 bios for that mobo???

 

[glock19owner]

A lot of NF7-S rev 2.0's are having issues with both 10 and 10.5x...so its just not you...

 

[Sentential]

Everyone of my multis past 10x are horribly unstable. Thus its time to get some better RAM

 

[sup3rcarrx8]

Yeah is there a way to get the mutli below 10.5? It boots up fine from 11 and up but not below 10.5.