AMD Phenom II (Results Only Thread)

[1xmattx1]

I think this is the first Phenom II 550

CPU = AM3 Phenom II X2 550 3.1Ghz (Stepping - 2)
mobo = ASRock 1780GMH/128M
Ram = 4x1Gb Hynix DDR2 333Mhz
HD = 1x 160Gb WE Caviar, 1x 250Gb Hitachi, 1x 80Gb Hitachi
PSU = Corsair TX650
PCI-e = VisionTek HD4850
Cooling = Stock HSF
Lenovo A61 Desktop, Garbage cooling but added extra fans and open side case

 

[icebob]

Benching rock solid @ 4.0ghz

[/URL][/IMG]

 

[cdawall]

SPECS:

550BE week 0921
Asus M4A78T-E
N3RO copper base pot
2x2GB D9JNM

max validation of the day

http://valid.canardpc.com/show_oc.php?id=588131

pushed the holy hell outta the HTT on this one

max bus speed i could squeeze outta her

pics of my rig

my liquid of choice for DICE 99.99% alcohol

 

[danger22]

results with real world bench

CPU = AM2+ 940 Phenom II BE (stepping 2) @ 3.4GHz 1.425V (1.37V under load)
CPU-NB multi = 13 i.e. 2.6GHz @ 1.3V
CPU Temp - approx 50 deg C - load and 34 deg C on idle
mobo = Asus M3N72-D
Ram = 2x2GB PC6400 supertalent 5-5-5-15-21-2T @ 1.98V (T800UX4GC5)
Cooling = Cooler Master Hyper TX2
Cased system - CM Elite

the system is stable like this. i have stopped here because i can't even get 3.5GHz stable at 1.5V with any CPU-NB settings.

here are some real world benchmarks from an app called Flux which solves electromagnetic problems using FEM. (ie lots of matrix calcs)

the amd is not quite as fast as my Q9300 at work but I managed a better OC on that cpu!

going from 3GHz to 3.4GHz speeds up the simulation by 10%

by changing the CPU-NB multi i can see an additional improvement of around 2%

 

[SCFAdamVcG]

3.8ghz stable at last,after removing a duff hdd squealing I managed to get a little more out of my gfx card and processor
Specs are in sig
Here's a pic with various apps [e.g 3dmark06,cpu-z,coretemp,rivatuner,everest]

 

[flowtek]

My X2 550 [email protected] 1.36vcore (0922APMW)
Biostar TA790GX 128M
2400NB / 1.28v
2000HT / 1.20v
1066 5-5-5-15 2T 2.06v

thx
flo

 

[SnakeATWAR]

Phenom II 550 @ Stock Voltage... (Wouldn't unlock to x4)


http://valid.canardpc.com/show_oc.php?id=602678

Edit:
@1.44 VCore it is stable @ 3.7 Ghz...

 

[mr.max-amd]

iv been stable at 3.4, i know its nothing but its plenty for me.... iv pushed on air to 3.8 to bench and it went bsod after 30 minutes,
i havent been here in o so long. i basically forgot about this site [sorry everyone]

 

[Mitazake]

AMD Phenom II x2 550BE unable to unlock 3rd and 4th cores.
Gigabyte MA790FXT-UD5P
Mushkin 2x2Gb 996601 6-6-6-18-24 1T at 1333

Got it stable to 3.914Ghz at 1.42v using a Zalman 9900



CPU VID NB is at 1.35v(+.25v)
RAM is at 1.9v(+.3v)

 

[yvliew]

Phenom II X3 710 on stock cooler
Gigabyte MA78GM US2H
4GB Transcend 800 DDR2
ATI HD 4670 512MB
Cooler Master Extreme Power Plus 460w

stable at 3.2ghz.. Will try higher soon. Any suggestion what should I increase? I have increase vcore to + 0.025, shall I go for more?

 

[Dolk]

yvliew: Check out the links in my sig for more info on the Phenom II.

to OCF btw

 

[snickers9009]

First Overclock

This is my first overclock i have been tinkering with the 940BE for a while and this is what i got so far nothing special but an achievment for me.

Core Temp Screen - IDLE average 36 / MAX average 53



CPU Z - CPU



CPU Z - Memory



Super PI



Ive got this on air usig the XIGMATEK HDT S1283 and the ANTEC 300 with 4 fans, atm i have budget motherboard, i havnt really read enough on changing the NB and my HT link or RAM volts or clocks. My voltage is high but im happy with the results, running stable in Prime 95 for 2 hours only short test but i will be running more hours each day, Havn't had time to try and go any further worried about the voltage any advice on trying to get it further or if i have done anything wrong please help ?

 

[LMFRY]

CPU = 955 BE
mobo = msi k9a2-plat
Ram = 4x1gb g.skill ddr2-1066
HD = 3xseagate 500gb
PSU = coolermaster 600w
PCI-e = Visiontek HD4870 512
Cooling = OCZ Vanquisher w/ a delta on it
Cased: Antec 900

I run it at 3.8ghz 24/7....stays about 40-45c, vanquisher is junk imo, i could run the same speed on teh stock cooler. Pulls 17k in 3dmk06 single card.

 

[QuietIce]

Another SB600 with a great OC!

What vCore do you need for that and what's your NB speed/voltage ...?

 

[LMFRY]

ill edit and post the specifics later when i get a chance...but its right around 1.4v core...the only 2 voltages ive touched are ram/cpu. I can bench at 4.0, but cant get over 3.8 24/7....the only reason im using that board is because i got the cpu/board for 200. It seems to hold its own though, id really like to be over 4.0 24/7 stable though.

Tell me what im doing wrong.....

 

[LS3_Airdale]

Well that's my overclock on stock voltage stable, here to show my temps :

 

[Porvalsh]

Phenom ii X4 955 @ 4059mhz



http://valid.canardpc.com/show_oc.php?id=751133

Ran all the benchies at this speed.

wPrime
PiFast
SuperPi

Seemed pretty solid, but couldn't get it much higher. 1.5v, about 32C on load (ambient outside was 9c).

 

[Seinken]

AMD Phenom X4 945 Deneb:

http://valid.canardpc.com/show_oc.php?id=753874

11 Hours p95 stable.

3.6ghz on super low volts. This cpu can do tons more I'm sure but I like my temps the way they are and it's already plenty fast for my needs.

 

[MikeSlough]

CPU = AM2+ 940 es Phenom II (stepping I have to get soon)
mobo = MSI-K9A2 plat v1
Ram = 2x1gb PC6400 tracers (d9's)
HD = 1x150gb raptor X
PSU = Corsair 620HX
PCI-e = Evga GTX260 SC
Cooling = 9700led
Cased system


These results where both 10 hours prime95 stable

 

[mkchiu]

CPU = AM2+ 940, Phenom II 550, RB-C2
mobo (X2) = Gigabyte GA-MA790X-DS4, F9 BIOS, SB600 (no ACC)
mobo (X4) = MSI 785GTM-E45, SB710 (ACC, unlocked)
Ram = 2x2GiB, PC6400 G.SKILL F2-6400CL-5D-4GBPQ, 5-4-4-13-2 unganged, 2.0V (M/B overvolts)
HD = 1 PATA WD1600JB, Win7 bare
PSU = Antec BP350
PCI-e (X2) = none, PCI test card
PCI-e (X4) = none, 785 (HD4200) IGP
Cooling (X2) = Stock HSF
Cooling (X4) = Scythe Ninja B
open bench

NB(X2)=1.1000V
NB(X4)=1.1750V

X2 3700 MHz, 1.4000 Vcore, 112 W_DC (~TDP using orthos/prime95), 48.0 C(AMD OverDrive)
X4 3400 MHz, 1.3375 Vcore, 131 W_DC (~TDP using orthos/prime95)