Asrock H67M underclock problem

[knuckle08]

Hello,
yesterday i though i might see what happens when i under-clock (lower the voltages) so i turned them down and now my pc wont turn on and constantly beeps when power button is pressed. i have only plugged in the essentials for the pc to run incuding power switch, 4gb ram stick, psu. i have also moved the cmos jumper to clear cmos then back to normal and took the battery out and replaced it with 2 other ones but still no luck,
someone help please.

specs:
Intel i7 2600k prosessor, Asrock H67M motherboard, geforce gt520 graphics card.

Thanks
Taylor

 

[JonIngall]

Try the CMOS reset again. Remove the battery first and leave the jumper in the reset position for several minutes.
Check the ram stick is securely located too.

 

[knuckle08]

Nope, that did not work . any other suggestions.
sorry for late reply