Changed Ram Profile on system

[davep122]

Hi,

I have never changed my RAM before and I wanted to check to see if I did everything that was needed.

The memory I have is 1866 Mhz, when I looked in the BIOS it was showing as 1400 Mhz. So I checked the Profiles, and it looked like it was set to the JEDEC profile, I noted down the XMP profile as this was 1867 MHz and I changed the first five options in the DRAM timings. I gave attached some pics below. Is there anything else I need to do. I didn't change voltage because the voltage was the same on JEDEC and XMP.

 

[davep122]

Here are the pics, the settings in the Tools section and the changes I made

 

[davep122]

This pic also show where I change the frequency

 

[redduc900]

Everything looks fine... DDR3-1866 (F3-14900CL9-4GBXL) rated at 9-10-9-28-2T and 1.5V.

 

[davep122]

Thanks for the reply, I was a bit worried about changing the settings.