E6600 CPU-Z@5337MHz under LN² *56K warning*

[before]

[System]

E6600 L627B156 OEM provided by watercooling.fr
Asus P5B Deluxe Wifi-AP Deluxe 1.03G bios 804 (Vcore, Vdroop, Vmch, Vdimm mods)
Super Talent PC2-5300 2*512MB
Windows 2k3 Server (tweaked... but corrupted :stick: )
Western Digital IDE 80Gb
Skirms_fr's Copper-Alu Pot within -130C to -160C

[Suicide CPU-Z]

Vcore = 1.94V BIOS
Vmch = 1.73V DMM
Vdimm = 2.52V DMM
Pot temp ~ -155C

http://valid.x86-secret.com/show_oc?id=160750

Improvement was very poor passing over 5.3GHz: the chip did [email protected] BIOS with -135C and 'only' [email protected] BIOS with -155C.

[Pictures]

... no comment

I've tried few Super Pi runs slightly over 5.2GHz but my OS is corrupted and times weren't good so I didn't take screenshots... BTW the chip wasn't able to do a single run @5227MHz and above.

The chip was cold-bugged at about -145C core temp (-145C = cold-boot ; -160C = freezing).

I would like to give my appreciation to skirms_fr who's lending me his self made pot. Great HUGE pot!...

Thanks for reading.

 

[hUMANbEATbOX]

awesome pics before, thanks for sharing

nice clocks too. get a new os ready and lets see some #'s!

 

[[SC]Ceasar]

Nice pics and once again, Nice OC!!

the chip did [email protected] BIOS with -135C and 'only' [email protected]

I laughed at that one.
"only"
lol

 

[BenF]

Nice pics!

 

[Gautam]

Great clocks Xavier, and don't worry if you didn't get the times you were looking for this round...still a great entrance into LN2.

 

[splat]

what happened to the Biostar???? it can't do 593mhz fsb? I'm amazed that pc2-5300 ram is doing 593mhz and 2.52v

 

[before]

Thx mates!

@Gautam: Thank you my friend Few days ago, I've managed to do 9.75s @5.2GHz which is a bit slow but I was using a bad container and didn't had time to tweak. And today times were about 9.8s @5.2GHz which is bull****. BTW, thinking about that makes me believe the chip could have been damaged during benching sessions. I don't see why it could only be OS related. For instance, while this CPU was able to get a CPU-Z validation @5134MHz with its 2 cores enable, today it wasn't possible to load windows with 2 cores even @4500MHz... :|

@splat: I've ran out of LN² today. I've used the main part of it, while trying to bench with the Biostar and a too small container... In fact the Biostar was heavily cold-bugged < -100C.

 

[(Clanger)(DOA)]

i really like these threads you should post more of them. I wish i had the money and the time to do this... Awsome job before.

 

[deathman20]

Pretty slick man. Great clocks.

 

[Knacko]

What's scratched into the insulation in the last pic? It looks like "vofolk".

 

[splat]

What's scratched into the insulation in the last pic? It looks like "vofolk".

i just assumed it was "before"

 

[satandole666]

oh christ

 

[before]

i just assumed it was "before"

Right!

Thank you all!

 

[El<(')>Maxi]

Excellent, love the pics!! That 6600 has some braggin rights

 

[before]

Thx mate!

I'll try to have a E6700 or a X6800 directly from Intel for next LN² session.

 

[nvidiaOCmaster]

How much was that nitrogen?

 

[Vento1]

Awesome great pics look forward to the next instalment.

 

[Verse914]

now that is awesome!

 

[before]

Thank you guys!

@nvidiaOCmaster: LN² costs a little less than $10 per liter.

 

[nvidiaOCmaster]

Nice, thanks dude.

Great clocks btw. I dont know how you guys get these mad speeds...