- Joined
- Jun 30, 2004
- Location
- San Antonio, Texas
Ok appealing to the masses here as its been along time since I have done AMD. I received my new setup yesterday.
Consisting of the following new parts
Gigabyte GA-F2A85X-UP4 motherboard
AMD A10 5800K CPU
LG 24x Optical drive
I'm using that I had from prior builds
4x4Gb GSkill Sniper 1866 memory
Intel 520 180Gb SSD
2x 300GB Seagate HDD's in Raid 0 (not installed yet)
Samsung SA27A750D
Here is the issue I'm having. Using onboard video for now via the HDMI port I will see the splash screen (most of it at least) then nothing. The monitor does not go black as in no signal it kinda had a glow to it like there is something there but it cant be displayed. I have even tried DVI. Now my monitor only had HDMI and Display-port on it. The DVI I used was DVI to HDMI. I grabbed my step sons monitor which had VGA and DVI on it and whallah I was able to see everything get into bios and even load windows 7. I went as far as to install AMD video drivers and my XFX 5770. If anything gets plugged into anything but the VGA if behaves as described above. I have put in an HDMI cable once into windows and the second monitor displayed the extended desktop.
I am at a loss for what is going on here. I did see there was a new bios available (didn't mention this issue as a fix) and I will flash to it and see if that corrects the issue. But as it didn't list this issue I'm not holding much hope lol.
Anybody have any ideas???? I really want to run discrete mid to upper gpu(s) on my monitor. After all this is Flagship AMD parts it should do HD with ease lol
Thanks for taking the time to look at this and please offer any assistance you can.
Consisting of the following new parts
Gigabyte GA-F2A85X-UP4 motherboard
AMD A10 5800K CPU
LG 24x Optical drive
I'm using that I had from prior builds
4x4Gb GSkill Sniper 1866 memory
Intel 520 180Gb SSD
2x 300GB Seagate HDD's in Raid 0 (not installed yet)
Samsung SA27A750D
Here is the issue I'm having. Using onboard video for now via the HDMI port I will see the splash screen (most of it at least) then nothing. The monitor does not go black as in no signal it kinda had a glow to it like there is something there but it cant be displayed. I have even tried DVI. Now my monitor only had HDMI and Display-port on it. The DVI I used was DVI to HDMI. I grabbed my step sons monitor which had VGA and DVI on it and whallah I was able to see everything get into bios and even load windows 7. I went as far as to install AMD video drivers and my XFX 5770. If anything gets plugged into anything but the VGA if behaves as described above. I have put in an HDMI cable once into windows and the second monitor displayed the extended desktop.
I am at a loss for what is going on here. I did see there was a new bios available (didn't mention this issue as a fix) and I will flash to it and see if that corrects the issue. But as it didn't list this issue I'm not holding much hope lol.
Anybody have any ideas???? I really want to run discrete mid to upper gpu(s) on my monitor. After all this is Flagship AMD parts it should do HD with ease lol
Thanks for taking the time to look at this and please offer any assistance you can.