has anyone gotten high overclocks without adjusting there voltage????

[jkilla74]

Does this vary depending upon the motherboard. I used to have to up the voltage to 1.8 to get stable with my XP2700 chip when I had my A7V8X board just as I had to up the voltage for my AGP to get my 9700 pro working well. Now I have a MSI K7N2 and this doesnt seem to be the case.. Why????




Jkilla’s Monster Rig:

Athlon XP 2700+ (w/Volcano 7 cooling 47-52 degrees)
MSI K72 N-force 2(25-31 degrees w/ 2 Intake fans,2 exhaust fans)
512 Mgs of PC3200 Corsair XMS cs2(1t-2-2-2-5 timings w/heat spreader)
ATI 9700 Pro(w/artic silver 3 O’clockers level I fan & Heatsink @371/675)
60 Gig Maxtor 7200 RPM ata/133 & 40 Gig Western Digital 7200 RPM ata100
Soundblaster Audigy (w/5.1 Cambridge speakers)
Sony 48/12/48 CDRW
ErnoMax 400 Watt Power supply
20 Inch Sony Monitor
Windows XP Professional Service Pack 1(Clean install)
3D MK2k1: 16,001 - http://service.futuremark.com/compare?2k1=6044643
Glexcess: 10,833 - http://www.glexcess.com/xsmark/detail.asp?res=1024&bpp=32&id=5863
FutureMK2k3: 5,248 - http://service.futuremark.com/compare?2k3=325407

 

[RangerJoe]

i got to 1.87ghz or so at stock voltage for my chip back when i got this chip (1.75v)

 

[GWN]

1.95 ghz at stock voltage on my 1700 tbred B

 

[Bon3thugz43v3r]

2000 on my 2100+ xp stock 1.6

 

[eXtraktor]

I got 2ghz out of my 1700+ T-Bred B with stock voltage. It all depends on how well your chip overclocks in the first place. If your chip is not meant to operate at a certain frequency, it wont do it even if you give it more voltage.

 

[T20]

LOCKED XP1600+ AGOIA Y @ 190FSB = 1995MHz

 

[Cmnore]

I reached 2.1 Gig @stock V in my GA-7VAXP. JIUHB 0302 1700 T-Bred. I have since changed my multi to 15x and have upped the voltage to 1.72.

 

[Blooz1]

My 1700 "B" (JIUHB 0302) is running 2083 at 1.65V without a hitch. I bump it up to 1.7-1.75 to run faster, but I've never been over 1.8V with this chip.