i tried to boost my ram up from 800 mhz to 1066 mhz but i found over heating with my system and cpu
my specs.
mobo gigabyte ep45-ud3r rev(1.1)
xfx 9600 gso
2x2 gb kingston pc2-6400 cl6 240 , 800 mhz
i tb wd sata 2
h.e.c 500w psu
i changed some options from the bios which are :
performance enhance (standard)
mch freq latch 333 mhz
Intel Core 2 Quad Q6600
Windows Vista Ultimate Edition SP1 (Build 6001)
CPU Arch : 1 CPU - 4 Cores - 4 Threads
CPU PSN : Intel Core2 Quad CPU Q6600 @ 2.40GHz
CPU EXT : MMX SSE SSE2 SSE3 SSSE3 EM64T
CPUID : 6.F.B / Extended : 6.F
CPU Cache : L1 : 4 x 32 / 4 x 32 KB - L2 : 2 x 4096 KB
Core : Kentsfield (65 nm) / Stepping : G0
Freq : 2400.04 MHz (266.67 * 9)
MB Brand : Gigabyte
MB Model : EP45-UD3R
NB : Intel P45/P43 rev A3
SB : Intel 82801JR (ICH10R) rev 00
GPU Type : GeForce 9600 GSO
DirectX Version : 10.0
RAM : 4096 MB DDR2 Single Channel
RAM Speed : 533.3 MHz (1:2) @ 6-8-8-24
Slot 1 : 2048MB (PC2-6400)
Slot 1 Manufacturer : Kingston
Slot 2 : 2048MB (PC2-6400)
Slot 2 Manufacturer : Qimonda
system memory multiplayer spd 4.00b
dram timing spd auto
and i found
CAS 6
TRCD 6
TRP 6
TRAS 18
V DRAM 1.98V
i didnt play with the voltage and left all other options and timings auto
would any one give me some steps or tell me whats happening ???
Last edited:
