- Joined
- Jun 10, 2011
- Location
- Connecticut, USA
So I finally got around to OCing my 930, and I've been playing with settings all day. I just stopped it from a prime95 blend run after an hour and a half only because I want to tweak things a bit before I let it go on a 12+ hour run over night/into tomorrow.
Settings I Changed
AI Overclock Tuner: Manual
CPU Ratio Setting: 21x
Intel SpeedStep Tech: Disabled
TurboMode: Disabled
BCLK Frequency: 191
DRAM Frequency: DDR3-1531MHz
UCLK Frequency: 3063MHz
QPI Link Data Rate: Auto
CPU Voltage: 1.24375 (Anything under would BSOD)
QPI/DRAM Core Voltage: 1.20000
IOH Voltage: 1.10
DRAM Bus Voltage: 1.65
Load-Line Calibration: Enabled
C1E Support: Disabled
How do these settings look? Should I change anything and/or tweak some other settings?
Temps were around 40-43C Idles and 71-75C Loads. Ambient was 27.6C.
Settings I Changed
AI Overclock Tuner: Manual
CPU Ratio Setting: 21x
Intel SpeedStep Tech: Disabled
TurboMode: Disabled
BCLK Frequency: 191
DRAM Frequency: DDR3-1531MHz
UCLK Frequency: 3063MHz
QPI Link Data Rate: Auto
CPU Voltage: 1.24375 (Anything under would BSOD)
QPI/DRAM Core Voltage: 1.20000
IOH Voltage: 1.10
DRAM Bus Voltage: 1.65
Load-Line Calibration: Enabled
C1E Support: Disabled
How do these settings look? Should I change anything and/or tweak some other settings?
Temps were around 40-43C Idles and 71-75C Loads. Ambient was 27.6C.