hey guys well i finally recieved my 3200+ 939 stepping cbbid 0501.
Now i just have about a dozen questions for yall. I have gotton this thing to run at around 2500mhz but it aint stable i think i got alot of settings wrong in the bios. Here are some of hte ones i have had problems with.
1.Adjust CPU VID 1.525 <=== when i change this it doesnt change the vcore
2. Cpu voltage over vid <=== this i have set to over 5.0% this was the only thing that seemed to raise the voltage
3.multi <=== i have it set to 10x
4.FSB <=== i have it set to 240 currently
5.ht frequency <== i have it set to 4x
6.cool n Quiet <=== is disabled
7. dram timing is set 1t
I have hyper x pc4000 kingston and hte timings are set to 3.4.4.8 1t. I know this memory can do at least 260 but i get blue screens when i try or it wont boot windows, should i crank hte memory voltage, i have had it at 2.8 before and it still did nothing. I would just like 2500mhz stable if possible and ill quit crying. Cpu is on water with dual rads and idles at 29 load is around 35.
Thanks guys for putting hte time into answering these questions.
Now i just have about a dozen questions for yall. I have gotton this thing to run at around 2500mhz but it aint stable i think i got alot of settings wrong in the bios. Here are some of hte ones i have had problems with.
1.Adjust CPU VID 1.525 <=== when i change this it doesnt change the vcore
2. Cpu voltage over vid <=== this i have set to over 5.0% this was the only thing that seemed to raise the voltage
3.multi <=== i have it set to 10x
4.FSB <=== i have it set to 240 currently
5.ht frequency <== i have it set to 4x
6.cool n Quiet <=== is disabled
7. dram timing is set 1t
I have hyper x pc4000 kingston and hte timings are set to 3.4.4.8 1t. I know this memory can do at least 260 but i get blue screens when i try or it wont boot windows, should i crank hte memory voltage, i have had it at 2.8 before and it still did nothing. I would just like 2500mhz stable if possible and ill quit crying. Cpu is on water with dual rads and idles at 29 load is around 35.
Thanks guys for putting hte time into answering these questions.