No video on monitor after new CPU and RAM

[Kaoskrewpb]

Hardware:
GA-890FXA-GD65
Cpu: FX-8350 8 core 4.0 ghz Black ed.
Power supply: corsair 1050 watt
GPU's: 2x ASUS HD7770 2GB
RAM: 16 GB (2x8gb) corsair Vengance
OS: Windows 7 HP 64 bit

Just upgraded my System with said processor and RAM, upgraded from an AMD Phenom II x6 1100T Black ed. And 8 gb (2x4gb) of corsair vengance.

I turn the computer on and I get no video on the screen.
I've tried holding down the clear CMOS button on the back and also removed battery for 30 seconds.
I also tried switching back to the 8 GB of ram, also tried removing the crossfire cable and the second graphics card.

 

[ATMINSIDE]

Double check that all power connections are made.

- 24-pin MOBO
- 8-pin CPU
- 6/8-pin PCIe

Edit: Also, this motherboard came out before the FX series. Did you update the BIOS before installing the 8350?

 

[||Console||]

If I had to guess put the old CPU back in and update the bios

 

[rustylivz]

Put AMD Phenom II x6 1100T back in , see if it posts

 

[Kaoskrewpb]

I put the old CPU in and it boots up. Of course it says CMOS settings wrong because I cleared them

 

[ATMINSIDE]

Update your BIOS to the newest rev.

 

[Mr.Scott]

I thought only the black socket boards supported the FX's.

 

[Kaoskrewpb]

I thought only the black socket boards supported the FX's.

Don't tell me that!!! lol
I read several places before I ordered the chip and people are running FX chips on my mobo.

 

[ATMINSIDE]

Don't tell me that!!! lol
I read several places before I ordered the chip and people are running FX chips on my mobo.

Did you update your BIOS yet?

 

[Kaoskrewpb]

Did you update your BIOS yet?

There are a bunch of updates, it's updating now. I'll keep this thread updated

 

[ATMINSIDE]

There are a bunch of updates, it's updating now. I'll keep this thread updated

Just grab the newest one.

 

[Kaoskrewpb]

Ok it's flashing now

 

[Kaoskrewpb]

It is working now. Thank you so much!
What bios changes should I make since I cleared the CMOS?

 

[ATMINSIDE]

Whatever settings you had before.

Glad its working!

 

[Kaoskrewpb]

Thank you! Back to Breaking Point. Lol

 

[TeknoBug]

If I had to guess put the old CPU back in and update the bios

^ that's USUALLY the case, I know I had to update my board's BIOS before I can throw in an FX chip after having a Phenom II in it.